GENERAL CATALOGUE
ADHESIVES • SEALANTS • CHEMICAL PRODUCTS FOR BUILDING
JANUARY
2020
GENERAL CATALOGUE
JANUARY
2020
INDEX BY SECTOR
9 1. 10 11 11 16
SCREEDS AND SMOOTHING COMPOUNDS 1.1 Screeds 1.2 Traditional screeds 1.3 Smoothing compounds 1.4 Products for levelling substrates
19 2. PRODUCTS FOR SOUNDPROOFING 25 3. PRIMERS, BONDING PROMOTERS, CONSOLIDATING AND WATERPROOFING PRODUCTS
37 4. 38 44 44
ADHESIVES FOR CERAMIC TILES AND STONE MATERIAL 4.1 Hydraulic binder based adhesives 4.2 Synthetic resin-based adhesives 4.3 Reactive adhesives
47 5. 48 49 50
GROUTS FOR CERAMIC TILES 5.1 Cementitious grouts 5.2 Epoxy grouts 5.3 Ready-to-use paste products
53 6. SYSTEMS FOR LAYING AND GROUTING ARCHITECTURAL STONE PAVING
59 7. 60 61 63 64 64 67 67 71 72
ELASTIC SEALANTS AND ADHESIVES 7.1 Acetic silicone sealants 7.2 Polyurethane sealants and adhesives 7.3 Neutral silicone sealants 7.4 Hybrid sealants and adhesives 7.5 Other sealants 7.6 Adhesives for PVC 7.7 Accessories and primers for sealants 7.8 Polyurethane foams 7.9 Accessories for foams
75 8. ADHESIVES AND FINISHING PRODUCTS FOR WOODEN FLOORS 76 8.1 Adhesives for wooden and laminate floors 81 8.2 Paints, stuccos, oils, base coats and coloured sealants for parquet 89 9. 90 98 100 103 103 104 104 104
ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS 9.1 Adhesives in water dispersion 9.2 Ancillary productss for LVT 9.3 Reactive adhesives 9.4 Polychloroprenic and elastomeric contact adhesives 9.5 Powder adhesives 9.6 Cementitious adhesives 9.7 Adhesive strips 9.8 Adhesives for synthetic grass
109 10. COMPLEMENTARY PRODUCTS FOR LAYING CERAMIC TILES, STONE MATERIAL, PARQUET, RESILIENT AND TEXTILE COVERINGS 110 10.1 Complementary products for laying ceramic tiles and stone material 111 10.2 Complementary products for laying resilient and textile coverings 113 10.3 Accessories, abrasive disks and products for the maintenance of parquet 121 11. 122 135 138
PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS 11.1 Resin based products 11.2 Cementitious based products 11.3 Complementary products for resin and cementitious floors
145 12. PRODUCTS FOR REPAIRING ASPHALT AND HIGHWAY MAINTENANCE 2
151 13. PRODUCTS FOR THE RESTORATION OF MASONRY BUILDINGS 152 13.1 Consolidating various types of weak and crumbly substrates (porous stone, brickwork, tuff, installation mortar, render, etc.) by impregnating 153 13.2 Reconditioning and consolidating masonry with free-flowing mortar 153 13.3 Consolidating masonry and render by injecting slurry 154 13.4 Horizontal chemical barriers against capillary rising damp 155 13.5 De-humidifying masonry with binders and mortars for render 158 13.6 Lime based breathable renders 158 13.7 Structural even “reinforced” renders 159 13.8 Skimming of de-humidifying breathable and structural mortars 160 13.9 Brick, stone, tuff and mixed masonries 161 13.10 Waterproofing and protecting construction features 163 14. REPAIRING, CONSOLIDATING AND STRENGTHENING WOODEN STRUCTURES 167 15. ADHESIVES AND SMOOTHING COMPOUNDS FOR CELLULAR CONCRETE BLOCKS 171 16. PRODUCTS FOR THE RESTORATION OF CONCRETE 172 16.1 Protection of steel reinforcement rods 173 16.2 Repairs to concrete with compensated-shrinkage mortar and binders 183 17. WATER-REPELLENT PRODUCTS FOR THE PROTECTION OF CONCRETE 187 18. RENDERING AND INSTALLATION MORTARS 191 19. SMOOTHING AND PROTECTIVE PRODUCTS FOR CONCRETE AND RENDER SURFACES 199 20. PRODUCTS FOR ANCHORING AND RAPID FIXING 207 21. PRODUCTS FOR STRUCTURAL BONDING, SCREED REPAIRING AND INJECTING INTO CRACKED CONCRETE 211 22. PRODUCTS FOR GALVANIC CATHODIC PROTECTION 215 23. COMPOSITE SYSTEMS FOR STRUCTURAL STRENGTHENING 231 24. PRODUCTS FOR THERMAL INSULATION 239 25. PRODUCTS FOR TREATING ASBESTOS CEMENT SLABS 243 26. WALL PROTECTIVE AND DECORATIVE COATINGS 259 27. 260 268 279
WATERPROOFING SYSTEMS 27.1 Waterproofing structures below ground level 27.2 Waterproofing structures above ground level 27.3 Sealing and waterproofing joints and fillets
287 28. 288 294 296 297 297
ADMIXTURES FOR CONCRETE 28.1 Admixtures for concrete 28.2 Admixtures for screeds 28.3 Form-release agents 28.4 Superficial curing compounds 28.5 Mapei Color Paving
301 29. 302 304 305 307 307 308 309
AGGREGATES AND MORTARS FOR THE BUILDING INDUSTRY 29.1 Mortars for the building industry 29.2 Pre-blended mortars for the building industry 29.3 Concrete for the building industry 29.4 Screeds for the building industry 29.5 Service products 29.6 Damp aggregates for the building industry 29.7 Dry aggregates for the building industry 3
ALPHABETICAL INDEX PAGE A
B
C
Additix P 268 Additix PE 138 Adesilex G19 100 Adesilex G19 Conductive 100 Adesilex G19 Fast 100 Adesilex G19 FR Fast 101 Adesilex G20 101 Adesilex G20 Fast 101 Adesilex LC/R 76 Adesilex LP 103 Adesilex MT32 90 Adesilex P4 16/38 Adesilex P9 38 Adesilex P9 Express 38 Adesilex P10 38 Adesilex P22 44 Adesilex PG1 208/216 Adesilex PG1 Rapid 208/216 Adesilex PG2 208/216 Adesilex PG4 208/279 Adesilex PVC 67 Adesilex PVC HP 67 Adesilex V4 90 Adesilex VS45 90 Adesilex VZ 103 Adesivil D3 76 Antipluviol 244 Antipluviol S 244 Antipluviol W 244 Aquacol T 90 Aquaflex 268 Aquaflex Roof 268 Aquaflex Roof HR 268 Aquaflex Roof Plus 269 Aquaflex Roof Premium 269
PAGE Intomap Maxi Fibro 188 Intomap R2 188 Intomap R2 Fibro 189 Isamite 270 Isolastic 39
E
Eco Prim Grip 26 Eco Prim PU 1K 26 Eco Prim PU 1K Turbo 26 Eco Prim T 27 Eco Prim T Plus 27 Eco Prim VG 27 Elastocolor Net 248 Elastocolor Paint 248 Elastocolor Paint Plus 248 Elastocolor Primer 249 Elastocolor Rasante 249 Elastocolor Rasante SF 249 Elastocolor Tonachino Plus 249 Elastocolor Waterproof 250 Elastorapid 39 Epojet 209/217 Epojet LV 209 Eporip 27/209 Eporip SCR 28 Eporip Turbo 28/209 Epoxy Speed 138 Expancrete Plus 288 Expanfluid 288 EXTRABETON* 306
K Kerabond 39 Kerabond Plus 40 Kerabond T 40 Keracolor FF 48 Keracolor GG 48 Keracolor PPN 54 Keracolor SF 48 Keracrete 40 Keraflex 40 Keraflex Easy S1 41 Keraflex Maxi S1 41 Keraflex Maxi S1 Zerø 41 Keralastic 44 Keralastic T 45 Keranet 110 Kerapoxy 49 Kerapoxy 4 LVT 98 Kerapoxy Adhesive 45 Kerapoxy Cleaner 110 Kerapoxy CQ 49 Kerapoxy Design 49 Kerapoxy IEG 50 Kerapoxy P 50 Keraquick Maxi S1 41 Keraset 42
F
Fiberplan 11 Fibres HPC 227/229 FIBROmalta* 302 FIBROstabilitura* 302 Fix & Grout Brick 44 Flexcolor 50 Flexcolor 4 LVT 98 FRANTUMATA* 308 Fuga Fresca 110 Fugolastic 48
BEtonFLuid* 305 Biblock 26 BIOstabilitura* 302 Cablejet 288 CALCESTRUZZO RCK30* 305 CALCESTRUZZO RCK40* 305 Carboplate 216 Carbotube 217 Cleaner H 113 Cleaner L 113 Colorite Beton 244 Colorite Matt 245 Colorite Performance 245 Color Paving Admix 297 Color Paving Binder 298 Color Paving Pronto 298 Consolidante 8020 152 Consolidante ETS 152 Consolidante ETS WR 152 Copper Band 138
D DMA 1000 296 DMA 2000 296 Drain Front 269 Drain Vertical/Drain Lateral 269 Dreno* 306 Duresil EB 245 Dursilac Base Filler 245 Dursilac Gloss 246 Dursilac Matt 246 Dursilac No Rust 246 Dursilac Satin 246 Dursilite 247
4
PAGE Dursilite Base Coat 247 Dursilite Gloss 247 Dursilite Matt 247 Dursilite Plus 248 Dynamon SX 288
* VAGA Products
G Glicovil Special 103 Granirapid 39/104 Grassello di CALCE* 302 Gravel 0-8 10/173 Gravel 0-15 173 Gravel 3-5 173 Gravel 6-10 173 Gravel - Bardiglio Grey (2-4 mm) 138 Gravel - Carrara White (2-4 mm) 139 Gravel - Ebony Black (2-4 mm) 139 H
HR10 Fibro* 303 HR15* 303
I
Idrocrete DM 289 Idrocrete KR 1000 289 Idrocrete S 289 Idrosilex 260 Idrostop 279 Idrostop B25 280 Idrostop Mastic 280 Idrostop PVC BE 280 Idrostop PVC BI 280 Idrostop Soft 281 Injectors Ø 23 217 INTO+* 304 INTO+ Fibro* 304 Intomap Allettamento 188 Intomap Allettamento H 188
L
Lampocem 200 Lamposilex 260 Latex Plus 42 Lignobond 76 Livigum 28
M Malech 28/250 Malta+ Fibro* 304 MaltaBASTARDA* 303 MaltaVISTA* 303 Mapeair AE1 289 Mapeair LA/P 290 Mape-Antique Allettamento 160 Mape-Antique CC 155 Mape-Antique Colabile 153 Mape-Antique Ecolastic 161 Mape-Antique Eco Rasante Civile 159 Mape-Antique Eco Rasante Grosso 159 Mape-Antique Eco Rinzaffo 156 Mape-Antique Eco Risana 156 Mape-Antique F21 153 Mape-Antique FC Civile 159 Mape-Antique FC Grosso 159 Mape-Antique FC Ultrafine 160 Mape-Antique I 153 Mape-Antique I-15 153 Mape-Antique Intonaco NHL 158 Mape-Antique LC 156 Mape-Antique MC 156 Mape-Antique MC Macchina 157 Mape-Antique Rinzaffo 157 Mape-Antique Strutturale NHL 158/160 Mape-Asphalt Repair 0/8 146 Mapeband 281 Mapeband Easy 281 Mapeband Flex Roll 281 Mapeband PE 120 282 Mapeband SA 282 Mapeband TPE 282
PAGE Mapecem 10 Mapecem Pronto 10 Mapecoat 4 LVT 98 Mapecoat ACT 021 250 Mapecoat ACT 196 250 Mapecoat Decor Protection 111 Mapecoat DW 25 122/251 Mapecoat Filler 270 Mapecoat I 24 122 Mapecoat I 62 W 122 Mapecoat I 600 W 29/122 Mapecoat I 600 W Lucido 29/123 Mapecoat I 620 W 123 Mapecoat I 650 WT 123 Mapecoat PU 20 N 270 Mapecoat PU 25 270 Mapecoat TC 271 Mapecoat Universal 123 Mapecoat W 251 Mapecoat Wet & Dry R11 112 Mapecolor CPU 124 Mapecolor Paste 124 Mapecolor Pigment 298 Mapecomfort FL 139 Mapecontact 104 Mapecrete Creme Protection 124 Mapecrete Drain P 290 Mapecrete Fast Protection 298 Mapecrete LI Hardener 124 Mapecrete Mineral Neutral 299 Mapecrete Stain Protection 125 Mapecryl Eco 91 Mapecure E 297 Mapecure S 297 Mapecure SRA 174/290 Mapecure WG 297 Mapefast C 290 Mapefast CF/L and Mapefast CF/P 291 Mapefer 172 Mapefer 1K 172 Mapefibre Glass HP 139 Mapefibre NS12/NS18 291 Mapefibre Screed 24 291 Mapefibre ST30/ST42 11/292 Mapefibre ST 50 Twisted 291 Mapefill 200 Mapefill MF 610 174/200 Mapefill R 200 Mapefinish 192 Mapefix Combibox VE SF Kit 201 Mapefix EP 385/585 201 Mapefix EP 470 Seismic 201 Mapefix EP Mixer 201 Mapefix Metal Sleeve 202 Mapefix PE + VE Mixer 202 Mapefix PE SF 202 Mapefix PE Wall 202 Mapefix Plastic Sleeve 203 Mapefix PolyBond 203 Mapefix UM-H 420 203 Mapefix VE SF 203 Mapefix VinyBond 204 Mapeflex AC3 64 Mapeflex AC4 65 Mapeflex AC-FR 2 65 Mapeflex AC-P 65 Mapeflex Blackfill 65 Mapeflex E-PU 21 SL 61 Mapeflex E-PU 30 NS 61/282 Mapeflex Firestop 1200°C 66 Mapeflex MS 40 64
PAGE Mapeflex MS 45 64 Mapeflex MS Crystal 64 Mapeflex PU35 CR 61 Mapeflex PU 40 61/283 Mapeflex PU 45 FT 62/283 Mapeflex PU50 SL 62/283 Mapeflex PU 65 62 Mapeflex PU 70 NS 62 Mapeflex PU 70 SL 63 Mapefloor Binder 930 125 Mapefloor Cleaner ED 140 Mapefloor CPU/COVE 125 Mapefloor CPU/HD 125 Mapefloor CPU/MF 126 Mapefloor CPU/NZ 126 Mapefloor CPU/RT 126 Mapefloor CPU/TC 126 Mapefloor Decor 700 127 Mapefloor EP19 127 Mapefloor EP 90 146 Mapefloor Filler 140 Mapefloor Finish 50 N 127 Mapefloor Finish 52 W 127 Mapefloor Finish 53 W/L 128 Mapefloor Finish 54 W/S 128 Mapefloor Finish 55 128 Mapefloor Finish 58 W 128 Mapefloor Finish 415 129 Mapefloor Finish 451 129 Mapefloor Finish 630 129 Mapefloor I 300 SL 129 Mapefloor I 300 SL TRP 130 Mapefloor I 306 CR 130 Mapefloor I 309 CR 130 Mapefloor I 320 SL CONCEPT 130 Mapefloor I 350 SL 131 Mapefloor I 360 AS 131 Mapefloor I 390 EDF 131 Mapefloor I 500 W 131 Mapefloor I 900 132 Mapefloor I 910 132 Mapefloor I 914 132 Mapefloor JA 132 Mapefloor Maintenance Kit 140 Mapefloor Pore Filler 133 Mapefloor PU 400 LV 133 Mapefloor PU 410 133 Mapefloor PU 460 133 Mapefloor PU 461 134 Mapefloor Wax Remover 140 Mapefluid N200 292 Mapefluid PZ500 292 Mapefluid PZ504 292 Mapefluid R104 293 Mapefoam 67/283 Mapeform 1500 296 Mapeform Eco Oil 296 Mapegel 50 260 MapeGlitter 50 Mapegrid B 250 217 Mapegrid B 300 218 Mapegrid B 400 218 Mapegrid C 170 218 Mapegrid G 120 218 Mapegrid G 220 219 Mapegrout 430 174 Mapegrout Anchor & Repair 174/204 Mapegrout Betontech HPC 146/175 Mapegrout Betontech HPC10 146/175 Mapegrout BM 175 Mapegrout Easy Repair 175
PAGE Mapegrout Fast-Set 176 Mapegrout FMR 176 Mapegrout FMR-PP 176 Mapegrout GF Betoncino B1 176 Mapegrout Hi-Flow 177 Mapegrout Hi-Flow B2 177 Mapegrout Hi-Flow GF 177 Mapegrout Hi-Flow TI 20 147/177 Mapegrout LM2K 178 Mapegrout SV 147/178 Mapegrout SV Fiber 147/178 Mapegrout SV T 147/178 Mapegrout T40 179 Mapegrout T60 179 Mapegrout Thixotropic 179 Mapeguard IC/Mapeguard EC 284 Mapeguard PC 284 Mapeguard ST 284 Mapeguard UM 35 110 Mapeguard WP 200 271 Mapeguard WP Adhesive 271 Mapegum EPX/Mapegum EPX-T 271 Mapegum WPS 272 Mapei Gun 310 67 Mapei Gun 310 PRO 68 Mapei Gun 420 2K 68 Mapei Gun 585 2K 68 Mapei Gun 600 PRO 68 Mapei Gun 825 2K 69 Mapei Spray Mop 113 Mapei Steel Bar 304 219 Mapei Steel Bar 316 219 Mapei Steel Dry 316 219 Mapei Waterproofer 260 Mapejoint 100/25 141 Mapelastic 272 Mapelastic AquaDefense 272 Mapelastic Foundation 261 Mapelastic Guard 192 Mapelastic Smart 272 Mapelastic Turbo 273 Mapelay 112 Mapelectric CP1 112 Mapelux Lucida 141 Mapelux Opaca 141 Mapenet 150 273 Mapenet EM 30 220 Mapenet EM 40 220 Mapenet EM Connector 220 Mapeplast PZ300 293 Mapeplast SF 293 Mapeplast UW 293 Mapeproof 261 Mapeproof BA Tape 261 Mapeproof CD 261 Mapeproof FBT 262 Mapeproof FBT Tape 262 Mapeproof Fix Tape 262 Mapeproof LW 262 Mapeproof Mastic 263 Mapeproof Primer 30 Mapeproof SA Tape 263 Mapeproof Seal 263 Mapeproof SW 263 Mapeproof Swell 264 MapePUR All in One Foam 71 MapePUR Cleaner 71 MapePUR Dispenser M 72 MapePUR Easy Spray 72 MapePUR Fire Foam M 71
5
INDEX BY SECTOR
6
PAGE
PAGE
PAGE
MapePUR Gun Special 73 MapePUR Gun Standard 73 MapePUR Multi Adhesive Foam G 71 MapePUR Roof Foam G 72 MapePUR Roof Foam M 72 MapePUR Universal Foam G 72 MapePUR Universal Foam M 72 Maperod C 220 Maperod G 221 Mapescreed 720 295 Mapescreed Advance HR 294 Mapescreed Advance MR 294 Mapescreed Finish 295 Mapescreed HF GEL 295 Mapescreed Slowset 295 Mapeshield E 25 172/212 Mapeshield I 172/212 Mapeshield S 212 Mapesil 300°C 60 Mapesil AC 60/284 Mapesil BM 63 Mapesilent Band R 20 Mapesilent Comfort 20 Mapesilent Panel 20 Mapesilent Roll 20 Mapesilent Tape 21 Mapesil GP 63 Mapesil LM 63 Mapesil U 60 Mapesil Z Plus 60 MapeSlope 273 Mapesonic CR 21 Mapesonic GD 4 LVT 21/99 Mapesonic SA 4 LVT 21/99 Mapesonic Strip 22 Mapestone Joint 54 Mapestone Joint Cleaner 54 Mapestone PFS 2 54 Mapestone PFS 2 Visco 55 Mapestone PFS PCC 2 55 Mapestone Scraper 55 Mapestone TFB 60 55 Mapestone TFB Cube 56 Mapestop 154 Mapestop Cream 154 Mapestop Cream Tool 280 154 Mapestop Cream Tool 600 155 Mapestop Injectors 155 Mapestop Kit Diffusion 155 Mapetape 285 Mapetard 294 Mapetard ES 179 Mapetex 50 273 Mapetex FG 274 Mapetex Sel 274 Mapetex System 111 Mapethene HT 264 Mapethene LT 264 Mapethene Primer 264 Mapethene Primer W 265 Mapetherm AR1 232 Mapetherm AR1 GG 232 Mapetherm AR1 Light 232 Mapetherm AR1 Maxi 232 Mapetherm Ba 233 Mapetherm Cork 233 Mapetherm Dripnose Bead 233 Mapetherm EPS 233 Mapetherm FIX 234 Mapetherm FIX 9 234
Mapetherm FIX B 234 Mapetherm Flex RP 234 Mapetherm M. Wool 235 Mapetherm Net 235 Mapetherm Profil 235 Mapetherm Profil Ba 235 Mapetherm Profil E 236 Mapetherm Profil V 236 Mapetherm Profil W 236 Mapetherm Tile Fix 15 111 Mapetiles Removable System 111 Mapetop N AR6 135 Mapetop S AR3 136 MapeWall Inject & Consolidate 154 MapeWall Intonaco Base 158 MapeWall Muratura Fine 161 MapeWall Muratura Grosso 161 MapeWall Render & Strengthen 158/161 Mapewash PO 299 Mapewash Protex 299 Mapewood Gel 120 164 Mapewood Paste 140 164 Mapewood Primer 100 164 MapeWrap 11 221 MapeWrap 12 221 MapeWrap 21 221 MapeWrap 31 222 MapeWrap 31 T 222 MapeWrap B FIOCCO 222 MapeWrap B UNI-AX 222 MapeWrap C BI-AX 223 Mapewrap C Connector 223 MapeWrap C FIOCCO 223 MapeWrap C QUADRI-AX 223 MapeWrap C UNI-AX 224 MapeWrap C UNI-AX HM 224 MapeWrap EQ Adhesive 224 MapeWrap EQ Net 224 MapeWrap G FIOCCO 225 MapeWrap G UNI-AX 225 MapeWrap Primer 1 225 MapeWrap S Fabric 650 225 MapeWrap S Fabric 2000 226 MapeWrap SG FIOCCO 226 MB1 Pavicalce* 307 MISTA* 308 Monofinish 192 Monolastic 274
Planiseal WR 40 184 Planiseal WR 85 Gel 184 Planiseal WR 100 184 Planitop 100 193 Planitop 200 193 Planitop 207 193 Planitop 210 193 Planitop 217 194 Planitop 400 180 Planitop 510 194 Planitop 517 194 Planitop 525 194 Planitop 530 195 Planitop 540 195 Planitop 560 195 Planitop 565 195 Planitop 600 RasaGesso 196 Planitop 610 RasaGesso M 196 Planitop Fast 330 17/196 Planitop Fine Finish 196 Planitop HDM Maxi 226 Planitop HDM Restauro 226 Planitop HPC 227 Planitop HPC Floor 227 Planitop HPC Floor 46 227 Planitop HPC Floor 46 T 228 Planitop HPC Floor T 228 Planitop HPC LV 228 Planitop HPC Tixo 229 Planitop Intonaco Armato 229 Planitop Raso Max 197 Planitop Smooth & Repair 180 Planitop Smooth & Repair R4 180 Planitop Superfine 197 Planopur 14 Plastimul 265 Plastimul 1K Super Plus 266 Plastimul 2K Plus 266 Plastimul 2K Reactive 266 Plastimul 2K Super 266 Plastimul C 267 Plastimul Primer 267 Plastimul Primer SB 267 Porocol 168 Porocol FF 168 PoroMap Deumidificante 157 PoroMap Finitura 160 PoroMap Rinzaffo Plus 157 Primer 3296 29/152 Primer A 69 Primer BI 30/274 Primer EP 30/69 Primer EP4 Fast 275 Primer EP 100W 275 Primer EP Rustop 30/134 Primer FD 69 Primer for Aquaflex 275 Primer G 31 Primer G Conductive 31/112 Primer Grip White 134 Primer KL 31 Primer LT 134 Primer M 31/70 Primer MF 32/70 Primer MF EC Plus 32 Primer P 32/70 Primer P1 32/275 Primer P2 33/276 Primer P3 33/276 Primer PU60 33/70
N
NERO+* 307 Nivoplan 16/192 Nivorapid 11 Novoplan Maxi 12
P
Pianocem M 12 Pianodur R 12 Planex HR 12 Planex HR Maxi 13 Planibond BA 100 204 Planicrete 29/294 Planigrout 300 204 Planigrout 310 205 Planipatch 13 Planipatch Fast Track 13 Planiprep 4 LVT 13/99 Planiprep Contract 14 Planiprep Fast Track 14 Planiprep Remove 4 LVT 14/99 Planiseal 88 265 Planiseal 288 265
PAGE
PAGE
PAGE
Primer PU Fast 276 Primer RM 148 Primer S 33 Primer SN 34/135 Primer SN Rasante 135 Primer W-AS 135 Prosfas 34 PU Catalyst 141 Pulicol 2000 113 Purtop 400 M 276 Purtop 600 277 Purtop 1000 277 Purtop ADY 277 Purtop Easy 277 Purtop Easy DW 278 Purtop Easy T 278 Purtop Easy T Primer 278 Purtop FR 278 Purtop HA 279 Purtop Primer Black 279
Triblock P 35 TurboMASS* 307
Ultracoat Binder 81 Ultracoat Cleaner 114 Ultracoat Easy 82 Ultracoat Easy Plus 82 Ultracoat EL 82 Ultracoat Filler S1 82 Ultracoat Hard Oil Fast 83 Ultracoat Hard Oil Hardener 83 Ultracoat HT 2K 83 Ultracoat HT A-S 83 Ultracoat HT Sport 84 Ultracoat MT 2K 84 Ultracoat Oil Care Plus 84 Ultracoat Oil Pad 114 Ultracoat Oil Wax 84 Ultracoat Pad 114 Ultracoat Pad Special Stripper 115 Ultracoat Polish A-S 115 Ultracoat Polish H-T 115 Ultracoat Premium Base 85 Ultracoat Remover Plus 115 Ultracoat Roller Base Sport 116 Ultracoat Roller Finish Sport 116 Ultracoat Roller MT8 116 Ultracoat Roller MT Sport 116 Ultracoat Roller T3 117 Ultracoat Roller T5 117 Ultracoat Roller T10 117 Ultracoat Soft Touch Base 85 Ultracoat Soft Touch Finish 85 Ultracoat Solvent Base 85 Ultracoat Sport Color 86 Ultracoat Sport Color Hardener 86 Ultracoat SR 117 Ultracoat Steel Spatula 118 Ultracoat Toning Base 86 Ultracoat Top Deck Cleaner 86 Ultracoat Top Deck Oil 87 Ultracoat Universal Base 87 Ultracolor Plus 49 Ultralite Flex 42 Ultralite S1 43 Ultralite S1 Quick 43 Ultralite S2 43 Ultralite S2 Quick 43 Ultramastic III 44 Ultraplan 15 Ultraplan Contract 15 Ultraplan Eco 15 Ultraplan Fast Track 15 Ultraplan Maxi 16 Ultraplan Renovation 16 Ultratop 136 Ultratop Base Coat 136 Ultratop Easycolor 136 Ultratop Living 137 Ultratop Loft F 137 Ultratop Loft W 137 Ultratop Stucco 137
Q Quartz 0.5 142 Quartz 0.9 142 Quartz 0.25 142 Quartz 1.2 34/142 Quartz 1.9 143 Quarzolite Base Coat 251 Quarzolite HF Plus 251 Quarzolite Paint 252 Quarzolite Tonachino 252 Quarzolite Tonachino Plus 252 R
RASA+* 305 Resfoam 1K-M 267 Rete 320 143 Rollcoll 91
S
SabbiaCEMENTO* 307 SABBIASAL* 308 SAETTA* 306 Silancolor AC Paint 252 Silancolor AC Paint Plus 253 Silancolor AC Tonachino 253 Silancolor AC Tonachino Plus 253 Silancolor Base Coat 253 Silancolor Base Coat Plus 254 Silancolor Cleaner Plus 254 Silancolor Paint 254 Silancolor Paint Plus 254 Silancolor Primer 255 Silancolor Primer Plus 255 Silancolor Tonachino 255 Silancolor Tonachino Plus 255 Silexcolor Base Coat 256 Silexcolor Marmorino 256 Silexcolor Paint 256 Silexcolor Primer 256 Silexcolor Tonachino 257 Silwood 81 Spacers 4 LVT 100 Spindle for Mapei Steel Dry 229 Stabilcem 180
T
Thinner for adhesives 34 Thinner PU 35 TICINO* 309 Tixobond White 42 Topcem 10 Topcem Pronto 11 Triblock Finish 197
U
Ultrabond 333 91 Ultrabond Eco 4 LVT 91 Ultrabond Eco 185 92 Ultrabond Eco 350 92 Ultrabond Eco 375 92 Ultrabond Eco 380 92 Ultrabond Eco 520 93 Ultrabond Eco 530 93 Ultrabond Eco 540 93 Ultrabond Eco 571 2K 101 Ultrabond Eco 575 76/93 Ultrabond Eco Contact 103 Ultrabond Eco Decor Dry 94 Ultrabond Eco Decor Wet 102 Ultrabond Eco Fast Track 94 Ultrabond Eco Fix 94 Ultrabond Eco MS 4 LVT 102 Ultrabond Eco MS 4 LVT Wall 102 Ultrabond Eco P909 2K 77 Ultrabond Eco P909 2K Fast 77 Ultrabond Eco P909 2K Plus 77 Ultrabond Eco PU 2K 45 Ultrabond Eco S940 1K 77 Ultrabond Eco S948 1K 78 Ultrabond Eco S955 1K 78 Ultrabond Eco S958 1K 78 Ultrabond Eco S968 1K 78 Ultrabond Eco S1000 1K 102 Ultrabond Eco S Lite 79 Ultrabond Eco S Plus 79 Ultrabond Eco Tack 94 Ultrabond Eco Tack 4 LVT 95 Ultrabond Eco Tack TX+ 95 Ultrabond Eco TX1 95 Ultrabond Eco TX2 95 Ultrabond Eco TX3 96 Ultrabond Eco V4 Evolution 96 Ultrabond Eco V4SP 96 Ultrabond Eco V4SP Conductive 96 Ultrabond Eco V4SP Fiber 97 Ultrabond Eco VS30 97 Ultrabond Eco VS90 Plus 97 Ultrabond MS Rapid 66/285 Ultrabond P902 2K 79 Ultrabond P913 2K 79 Ultrabond P980 1K 80 Ultrabond P990 1K 80 Ultrabond P-R9 114 Ultrabond PU Strong 66 Ultrabond S965 1K 80 Ultrabond S997 1K 80 Ultrabond Super Grip 66/97 Ultrabond Turf 2 Stars 104 Ultrabond Turf 2 Stars Pro 104 Ultrabond Turf 2 Stars W 105 Ultrabond Turf LS 105 Ultrabond Turf PU 1K 105 Ultrabond Turf PU 1K LC 105 Ultrabond Turf PU 2K 106 Ultrabond Turf Repair 106 Ultrabond Turf Tape 100 106 Ultrabond Turf Tape 300 106 Ultrabond Turf Tape Pro 107 Ultrabond TX57 98 Ultracoat Aqua Plus 81 Ultracoat Base One 81
V
VAGAlighTher* 304 VAGAQUARZ* 306 VAGASAL* 308 VAGLIATA* 309 VAGLIATA Super* 309 VG03S* 309 VG15* 310 VG16SS* 310 VG17FS* 310 Vinavil 03V 240
7
SCREEDS AND SMOOTHING COMPOUNDS
1. SCREEDS AND SMOOTHING COMPOUNDS 1.1 Screeds_____________________________________________________________________________________
Mapecem
TECHNICAL DATA: Recommended mixing ratio: 350-450 kg of MAPECEM for 1 m³ of aggregates (diameter from 0 to 8 mm) and with 80-160 kg of water according to the moisture content of the aggregates. Workability time: 20-30 minutes. Set to light foot traffic: after 2-3 hours. Waiting time before laying: – 3 hours for ceramic tiles and stone material; – 24 hours for resilient and wood coverings. Residual humidity after 24 hours: less than 2%. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: tapping and flattening with a straight edge. Consumption: 3.5-4.5 kg/m² per cm of thickness. Packaging: 20 kg bags.
Special binder for quick-setting and drying (24 hours), shrinkagecompensated screeds.
Gravel 0-8
Blend of aggregates for MAPECEM, assorted grain size from 0 to 8 mm.
EN 12620
TECHNICAL DATA: Size of aggregate: assorted grain size from 0 to 8 mm. Consumption: 1.6 kg/m² per mm of thickness. Packaging: 20 kg bags.
EN 13139
Mapecem Pronto
Pre-blended, ready-to-use mortar for quick-setting and drying (24 hours), shrinkage-compensated screeds.
EN 13813
A1FL
Topcem
L IA
N SIO CLA IS
FOR BUILD SS
EM
Special binder for normal-setting, quick-drying (4 days), shrinkagecompensated hydraulic screeds.
G MATER IN
10
TECHNICAL DATA: Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately 2.2 litres of water. Workability time: 20-30 minutes. Set to light foot traffic: after 2-3 hours. Waiting time before laying: – 3 hours for ceramic tiles and stone material; – 24 hours for resilient and wood coverings. Residual humidity after 24 h.: less than 2%. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: tapping and flattening with a straight edge. Consumption: 20 kg/m² per cm of thickness. Packaging: 25 kg bags.
TECHNICAL DATA: Recommended mixing ratio: 200-250 kg of TOPCEM with 1 m³ of aggregates (diameter from 0 to 8 mm) and 120-140 kg of water for dry aggregates. Workability time: 40-60 minutes. Set to light foot traffic: after 12 hours. Waiting time before laying: 24 hours for ceramic tiles, 2 days for natural stone and 4 days for resilient and wood coverings. Residual humidity after 4 days: less than 2%. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: tapping and flattening with a straight edge. Consumption: 2-2.5 kg/m² per cm of thickness. Packaging: 20 kg bags.
Topcem Pronto
Ready-to-use, ready mixed, shrinkage compensated, mortar with high thermal conductivity for quick-drying screeds.
EN 13813
ER
MAL COND U CT
TH
A1FL
IT
HI GH
IV Y
W/mK
N SIO CLA IS
L IA
FOR BUILD SS
EM
EN 12667
TECHNICAL DATA: Mixing ratio: 1 25 kg bags of TOPCEM PRONTO with 1.7 litres of water. Workability time: 40-60 minutes. Set to light foot traffic: after 12 hours. Waiting time before laying: 24 hours for ceramic tiles, 2 days for natural stone and 4 days for resilient and wood coverings. Residual humidity after 4 days: less than 2%. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: tapping and flattening with a straight edge. Consumption: 18-20 kg/m² per cm of thickness according to the compaction degree. Thermal efficiency: λ = 2,008 W/mK. Packaging: 25 kg bags.
G MATER IN
1.2 Traditional screeds____________________________________________________________________________
Mapefibre ST30/ST42
TECHNICAL DATA: Dosage: from 1 to 7 kg per cubic metre of mix. Packaging: 6 kg polyethylene bags.
Structural polymer fibres for concrete and cementitious screeds. May be used to completely or partially replace conventional reinforcement. Available fibre length: 30 and 42 mm.
1.3 Smoothing compounds____________________________________________________________________
Fiberplan
Self-levelling, fibre-reinforced, ultra rapid hardening smoothing compound for thicknesses from 3 to 10 mm. Particularly recommended for wooden substrates.
EN 13813
CT
LEVELLING COMPOUNDS
C25-F7 A2FL-s1
Nivorapid
EN 13813
LEVELLING COMPOUNDS
L IA
N SIO CLA IS
FOR BUILD SS
EM
C40-F10 A2FL-s1
G MATER IN
Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from 1 to 20 mm, including on vertical surfaces. Ideal for localised repair works.
TECHNICAL DATA: Where to use: internal ceramic, natural stone floors, resilient and wooden coverings. Workability time: 20-30 minutes. Thickness applied: from 3 to 10 mm. Set to light foot traffic: approx. 3 hours. Waiting time before laying: 3 hours for stable and not sensitive to moisture ceramic tiles and natural stone, 12 hours for resilient and wood coverings. Colour: pinkish grey. Application: trowel or rake. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Consumption: 1.5 kg/m² per mm of thickness. Packaging: 25 kg bags.
TECHNICAL DATA: Where to use: internal floors and walls for ceramic, natural stone, resilient and wooden floorings. Workability time: 15 minutes. Thickness applied: from 1 to 20 mm. Set to light foot traffic: approx. 2 hours. Waiting time before laying: 4-6 hours for ceramic tiles and natural stone, 6-12 hours for parquet and resilient floorings. Colour: grey. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: metal trowel. Consumption: 1.6 kg/m² per mm of thickness. Packaging: 25 kg bags.
11
1. SCREEDS AND SMOOTHING COMPOUNDS
Novoplan Maxi
EN 13813
C20-F4 A1FL
ER
MAL COND U CT
IV
IT
HI GH
TH
Rapid-hardening, fibre-reinforced, freeflowing cementitious levelling mortar with high thermal efficiency applied in layers from 3 to 40 mm thick, specifically designed for underfloor heating/cooling systems.
Y
W/mK EN 12667
Pianocem M
Thixotropic cementitious smoothing compound for thicknesses from 1 to 5 mm, including on vertical surfaces.
EN 13813
LEVELLING COMPOUNDS
C25-F7 A1FL
Pianodur R
Planex HR
12
TECHNICAL DATA: Where to use: internal floors and walls for resilient coverings. Workability time: 4 hours. Thickness applied: from 1 to 5 mm. Set to light foot traffic: from 4 to 24 hours depending on the surrounding temperature. Waiting time before laying: 1-3 days for resilient coverings. Colour: grey. Storage: 12 months. Application: trowel. Consumption: 1.4 kg/m² per mm of thickness. Packaging: 25 kg bags.
TECHNICAL DATA: Where to use: internal floors for resilient coverings. Workability time: 20-30 minutes. Thickness applied: up to 3 mm. Set to light foot traffic: 3 hours. Waiting time before laying: 12 hours for resilient coverings. EMICODE: EC1 Plus - very low emission. Colour: grey. Storage: 12 months. Application: trowel or rake. Consumption: 1.5 kg/m² per mm of thickness. Packaging: 25 kg bags.
Fine-grained, ultra quick-setting self-levelling smoothing compound for thicknesses up to 3 mm per coat, suitable for floors subject to intense traffic.
Rapid-drying, moisture-resistant, selflevelling smoothing compound for layers 1 to 10 mm thick. Also suitable for smoothing off internal surfaces; smoothing off internal substrates before bonding non-welded resilient floor tiles with reactive adhesives in areas that need to be washed or rinsed frequently; smoothing over concrete substrates with rising damp before placing PVC uncoupling sheets (such as MAPELAY).
TECHNICAL DATA: Where to use: covering compact, under-floor heating/cooling systems and levelling off all types of existing heated floors. Workability time: 30-40 minutes. Thickness applied per coat: from 3 to 40 mm. Set to light foot traffic: 3 hours. Waiting time before bonding flooring: ceramic and natural stone flooring not sensitive to damp 12-24 h; flooring sensitive to damp 2 days per cm of thickness applied. Application: trowel, rake, levelling bar or pump. EMICODE: EC1 Plus - very low emission. Mixing ratio: 16-18 parts of water per 100 parts by weight of NOVOPLAN MAXI. Consumption: 1.8 kg/m² per mm of thickness. Thermal efficiency: λ = 1,727 W/mK. Storage: 12 months. Packaging: 25 kg bags.
EN 13813
LEVELLING COMPOUNDS
C25-F6 A1FL
TECHNICAL DATA: Where to use: internal and external floors and walls for ceramic, natural stone, resilient and wooden coverings. Workability time: 20-30 minutes. Thickness applied: from 0 to 10 mm. Set to light foot traffic: approx. 3 hours. Waiting time before laying: 24-48 hours for ceramic tiles and natural stone, 12 hours for resilient coverings. EMICODE: EC1 Plus - very low emission. Colour: grey. Storage: 12 months. Application: rake, trowel or pump. Consumption: 1.7 kg/m² per mm of thickness. Packaging: 25 kg bags.
Planex HR Maxi
Rapid-drying, moisture-resistant, selflevelling smoothing compound for layers 2 to 20 mm thick. Also suitable for smoothing off internal surfaces; smoothing off internal substrates before bonding non-welded resilient floor tiles with reactive adhesives in areas that need to be washed or rinsed frequently; smoothing over concrete substrates with rising damp before placing PVC uncoupling sheets (such as MAPELAY).
EN 13813
A1FL
Planipatch
EN 13813
CEMENTITIOUS SCREED
C35-F7 A1FL
N SIO CLA IS
L IA
FOR BUILD SS
EM
Fine-grained, ultra quick-drying, thixotropic cementitious smoothing compound for thicknesses from 0 to 10 mm, including on vertical surfaces.
TECHNICAL DATA: Where to use: internal and external floors and walls for ceramic, natural stone, resilient and wooden coverings. Workability time: 20-30 minutes. Thickness applied: from 2 to 20 mm. Set to light foot traffic: approx. 3 hours. Waiting time before laying: 24-72 hours for ceramic tiles and natural stone, 12 hours for resilient coverings. EMICODE: EC1 Plus - very low emission. Colour: grey. Storage: 12 months. Application: rake, trowel or pump. Consumption: 1.7 kg/m² per mm of thickness. Packaging: 25 kg bags.
TECHNICAL DATA: Where to use: internal floors and walls for ceramic, natural stone, resilient and wooden coverings. Workability time: approx. 10 minutes. Thickness applied: from 0 to 10 mm. Set to light foot traffic: approx. 2 hours. Waiting time before laying: 4-6 hours for ceramic tiles and natural stone, 12 hours for resilient coverings. EMICODE: EC1 Plus - very low emission. Colour: grey. Storage: 12 months. Application: trowel. Consumption: 1.5 kg/m² per mm of thickness. Packaging: 25 kg bags.
G MATER IN
Planipatch Fast Track
Fine-grained, ultra quick-drying, thixotropic smoothing compound for: – repairs up to 25 mm; – laying of resilient coverings after 1 hour.
EN 13813
CEMENTITIOUS SCREED
C35-F7 E
Planiprep 4 LVT
Ready-to-use smoothing compound for levelling off existing substrates with joint before laying LVT coatings. Existing interior ceramic and natural stone substrates can be levelled and smooth over (down to a feather edge up to a thickness of 2 mm) filling joints and gaps between the tiles creating a fine a smooth surface suitable for bonding loose-lay LVT tiles and planks using reactive adhesives, such as ULTRABOND ECO MS 4 LVT and ULTRABOND ECO MS 4 LVT WALL in a very short time (after 2 hours).
TECHNICAL DATA: Where to use: internal floors and walls for ceramic, natural stone, resilient and wooden coatings. Workability time: approx. 10 minutes. Thickness applied: from 0 to 25 mm. Set to light foot traffic: approx. 1 hour. Waiting time before laying: 1 hour. Colour: grey. Storage: 12 months. Application: trowel. Consumption: 1.5 kg/m² per mm of thickness. Packaging: 23 kg bags and 20 kg boxes containing 4x5 kg aluminium bags.
TECHNICAL DATA: Where to use: internal floors and walls for loose-lay LVT. Consistency: thick paste. Colour: white. Thickness applied: 0-2 mm (up to 3-4 mm in gaps and joints). Set to light foot traffic: approx. 1 hour. Waiting time before sanding and applying LVT: approx. 2 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: trowel. Consumption: 80-100 g/m². Packaging: 10 kg drums.
13
1. SCREEDS AND SMOOTHING COMPOUNDS
Planiprep Contract NEW
Fine textured cementitious skimming compound, suitable for levelling and skimming, also in more than one coat, new and existing internal substrates (also ceramic) to make them suitable for bonding all types of floor covering, from 1 to 3 mm of thickness.
Planiprep Fast Track
Ultra rapid-drying fine textured thixotropic cementitious skimming compound, suitable for levelling and skimming new and existing internal substrates (from a feather-edge up to a maximum of 3 mm) to make them suitable for bonding all types of floor covering very quickly (2 hours), including resilients and textiles.
Planiprep Remove 4 LVT
Ready-to-use grout smoother for looselay LVT easy to remove without leaving any residual. This product is used to level off and smooth over (down to a feather edge in layers up to 2 mm thick) existing internal ceramic and stone surfaces. It fills joints and gaps between tiles and forms a fine, smooth finish suitable for loose-lay LVT tiles and planks.
Planopur
Two-component, self-levelling, flexible, polyurethane levelling compound for all types of substrate, especially the deformable type.
14
EN 13813
THECNICAL DATA: Where to use: internal floors and walls. Workability time: 4 hours. thickness applied: from 1 to 3 mm. Set to light foot traffic: from 4 to 24 hours, according to the surrounding temperature. Waiting time before laying: 1 day. Colour: gray and white. Storage: 12 months. Application: trovel. Consumption: 1.2 kg/m² per mm of thickness. Packaging: 22 kg bags.
TECHNICAL DATA: Where to use: internal floors and walls for ceramic, natural stone and resilient coverings. Consistency: fine powder. Colour: grey. Workability time: approx. 25 minutes. Thickness applied: from 0 to 3 mm (1 cm for localised repair works). Set to light foot traffic: approx. 1 hour (3 mm). Waiting tile before bonding flooring: 2 hours for resilient coverings. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: trowel. Consumption: approx. 1.0 kg/m² per mm of thickness. Packaging: 16 kg boxes containing 4 sachets from 4 kg plastic.
TECHNICAL DATA: Where to use: internal floors for loose-lay LVT. Consistency: thick paste. Colour: white. Thickness applied: 0-2 mm. Set to light foot traffic: 12-24 hours. Waiting time before sanding and installing looselay LVT: 12-24 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: trowel. Consumption: approx. 0.8-1.0 kg/m². Packaging: 10 kg drums.
TECHNICAL DATA: Workability time: 20-25 minutes. Application temperature range: from +10°C to +30°C. Set to light foot traffic: approx. 12 hours. Waiting time before laying: approx. 15 hours. Colours: Comp. A: beige, comp. B: brown. Application: rake or flat metal trowel. Storage: 24 months. Consumption: approx. 1.5 kg/m² per mm of thickness. Packaging: 14 kg units.
Ultraplan
Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1 to 10 mm.
EN 13813
LEVELLING COMPOUNDS
C30-F7 A2FL-s1
Ultraplan Contract
NEW
Self-levelling, ultra quick-hardening smoothing compound ideal for large sites and retails for thicknesses from 1 to 10 mm.
EN 13813
LEVELLING COMPOUNDS
C30-F7 A2FL-s1
Ultraplan Eco
Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1 to 10 mm.
EN 13813 CT
LEVELLING COMPOUNDS
N SIO CLA IS
L IA
FOR BUILD SS
EM
C25-F7 A2FL-s1
G MATER IN
Ultraplan Fast Track
Ultra-fast drying self-levelling compound for thicknesses from 1 to 10 mm. It is suitable for restoring resilient floor which have to be ready for use in quick times.
EN 13813
LEVELLING COMPOUNDS
C50-F7 A2FL S1
TECHNICAL DATA: Where to use: internal floors for ceramic, natural stone, resilient and wooden coverings. Workability time: 20-30 minutes. Thickness applied: from 1 to 10 mm. Set to light foot traffic: approx. 3 hours. Waiting time before laying: 3-4 hours for stable and not sensitive to moisture ceramic tiles and natural stone, 12 hours for resilient and wood coverings. Application: trowel, rake or pump. EMICODE: EC1 Plus - very low emission. Colour: pinkish grey. Storage: 12 months. Consumption: 1.6 kg/m² per mm of thickness. Packaging: 23 kg bags.
THECNICAL DATA: Where to use: internal floors and walls, for ceramic, natural stone, resilient and wooden coatings. Workability time: 20-30 min. thickness applied: da 1 a 10 mm. Set to light foot traffic: approx. 3 hours. Waiting time before laying: 3-4 hours for stable and not sensitive to moisture ceramic and natural stone, 12 hours for resilient and wood coverings. Colour: gray. Storage: 12 months. Application: trowel, rake or pump. Consumption: 1.7 kg m² per mm of thickness. Packaging: 25 kg bags.
TECHNICAL DATA: Where to use: internal floors for ceramic, natural stone, resilient and wooden coverings. Workability time: 20-30 minutes. Thickness applied: from 1 to 10 mm. Set to light foot traffic: approx. 3 hours. Waiting time before laying: 3-4 hours for stable and not sensitive to moisture ceramic tiles and natural stone, 12 hours for resilient and wood coverings. Application: trowel, rake or pump. EMICODE: EC1 Plus - very low emission. Colour: pinkish grey. Storage: 12 months. Consumption: 1.6 kg/m² per mm of thickness. Packaging: 23 kg bags.
TECHNICAL DATA: Consistency: fine powder. Where to use: internal floors, for resilient and coverings coatings. Pot life: 10-15 minutes. Thickness applied: 1-10 mm. Set to light foot traffic: approx. 1 hour. Waiting tile before bonding flooring: 2 hours for ceramic tiles, natural stone, resilient and wood coverings. Application: trowel or rake. EMICODE: EC1 Plus - very low emission. Colour: grey. Storage: 12 months. Consumption: 1.6 kg/m² per mm of thickness. Packaging: 23 kg bags.
15
1. SCREEDS AND SMOOTHING COMPOUNDS
Ultraplan Maxi
Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 3 to 40 mm.
EN 13813
LEVELLING COMPOUNDS
C35-F7 A2FL-s1
Ultraplan Renovation
Self-levelling fibre-reinforced rapidhardening smoothing compound applied in layers 3 to 40 mm thick. Particularly suitable for levelling off existing substrates, even wooden substrates.
EN 13813
LEVELLING COMPOUNDS
C25-F6 A1FL
TECHNICAL DATA: Where to use: internal floors for ceramic, natural stone, resilient and wooden coatings. Workability time: 30-40 minutes. Thickness applied: from 3 to 40 mm. Set to light foot traffic: approx. 3-12 hours (depending on thickness). Waiting time before laying: from 3-4 to 12 hours for stable and not sensitive to moisture ceramic tiles and natural stone, from 12 to 72 hours for resilient and wood coverings (depending on thickness). Application: trowel or pump. EMICODE: EC1 Plus - very low emission. Colour: grey. Storage: 12 months. Consumption: 1.7 kg/m² per mm of thickness. Packaging: 25 kg bags.
TECHNICAL DATA: Areas of use: internal floors for installing ceramic, stone, resilient and wooden flooring. Workability time: 30-40 minutes. Thickness applied: 3 to 40 mm. Set to foot traffic: approx. 3-12 hours (depending on thickness). Waiting time before installation: from 3-4 to 12 hours for ceramic and stable and not sensitive to moisture stone; from 12 to 72 hours for resilients and wood (depending on thickness). Application: spreader or pump. EMICODE: EC1 Plus - very low emission. Colour: grey. Storage: 12 months. Consumption: 1.8 kg/m² per mm of thickness. Packaging: 25 kg bags.
1.4 Products for levelling substrates_____________________________________________________________
Adesilex P4
Quick-hardening cementitious levelling compound for internal and external surfaces.
EN 12004
IN CO MP LI
RDS NDA TA
IT NT CEME
MI CT ILES
ITH EUROPEA N CE W AN EN 12004 S
IO A US CER ADHE SIVE FOR
Nivoplan
Smoothing mortar for internal and external walls and ceilings for thicknesses from 2 to 20 mm.
EN 998-1
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
16
TECHNICAL DATA: Where to use: on floors for ceramic and natural stone coatings. Workability time: approx. 60 minutes. Thickness applied: from 3 to 20 mm. Set to light foot traffic: approx. 4 hours. Application: N° 6 or 10 rounded notched trowel. EMICODE: EC1 Plus - very low emission. Colour: grey. Storage: 12 months. Consumption: 4-10 kg/m². Packaging: 25 kg bags.
TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3 hours. Thickness applied: from 2 to 20 mm. Waiting time before laying ceramic and natural stone: 24 hours, according to thickness. Application: trowel. Colours: grey and white. Storage: 12 months. Consumption: 1.4 kg/m² per mm of thickness. Packaging: 25 kg bags.
Planitop Fast 330
Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
MC-IR
TECHNICAL DATA: Where to use: internal walls and floors for ceramic and natural stone coatings. Workability time: approximately 20 minutes. Thickness applied: from 3 to 30 mm. Waiting time before laying ceramic and natural stone: 4 hours, varies according to the surrounding temperature. Application: smooth trowel. EMICODE: EC1 - very low emission. Colour: grey. Storage: 12 months. Consumption: 1.45 kg/m² per mm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
SURFACE PROTECTION SYSTEMS FOR CONCRETE
17
PRODUCTS FOR SOUNDPROOFING
2. PRODUCTS FOR SOUNDPROOFING
Mapesilent Band R
Closed-cell, expanded polyethylene adhesive band applied to perimeter walls and around the edges of elements which pass through screeds to avoid the formation of acoustic bridges, designed to be easily applied in a L-shape. The product can be used in combination with all the products from the MAPESILENT range. Available in two different heights depending on the total thickness of floating screed.
Mapesilent Comfort
Dry soundproofing system for floating screeds made from high density, closedcell foam polyethylene sandwiched to a special protective film.
TECHNICAL DATA: Format: light blue roll. Height: – 100 mm (+ 50 mm base); – 160 mm (+ 50 mm base). Thickness: 5 mm. Length: 50 m. Packaging: one pack with 4 rolls.
TECHNICAL DATA: Thickness: 6 mm. Compressibility (reduction in thickness when under load for a period of time): < 8%. Thermal conductivity - λ: 0.04 W/mK. Water vapour diffusion resistance factor - µ: > 2000. Dynamic stiffness for calculation purposes (S’): 50 MN/m³. Calculated reductions of impact noise from footsteps (∆Lw): 23,5 dB. Calculated noise level index of impact noise from footsteps (L’n,w): 58 dB (*). Measured noise level index of impact noise from footsteps (L’n,w): 57 dB (*). (*)
Mapesilent Panel
Tiles with a bitumen and special polymer-based elasto-plastomeric membrane with polyester reinforcement, sandwiched to a resilient layer of polyester fibre.
Mapesilent Roll
Sheets with a bitumen and special polymer-based elasto-plastomeric membrane with polyester reinforcement sandwiched to a layer of resilient polyester fibre coated with blue, nonwoven polypropylene fabric with a 5 cm wide self-adhesive border along the sides.
20
alculations and testing carried out on a 20+4 cm thick brick/ c cement floor slab, a 10 cm levelling layer over the system, a 5 cm thick cementitious screed and ceramic flooring.
TECHNICAL DATA: Tensile strength: – longitudinal: 700 N/50 mm; – transversal: 500 N/50 mm. Impact strength: 900 mm. Resistance to static perforation: 15 kg. Impermeability to water: > 100 KPa. Apparent dynamic stiffness (S’t): 10 MN/m³. Dynamic stiffness for calculation purposes (S’): 21 MN/m³. Reduction of noise from footsteps when installed (∆Lw): 42 dB. Thermal resistance (R): 0.313 m²K/W. Nominal thickness: 13 mm. Format: 1000 mm x 1000 mm tiles. Weight: 5 kg/m². Packaging: pallets containing 75 m².
TECHNICAL DATA: Tensile strength: – longitudinal: 700 N/50 mm. – transversal: 500 N/50 mm. Impact strength: 900 mm. Resistance to static perforation: 15 kg. Impermeability to water: > 100 KPa. Apparent dynamic stiffness (S’t): 9 MN/m³. Dynamic stiffness for calculation purposes (S’): 21 MN/m³. Reduction of noise from footsteps when installed (∆Lw): 37 dB. Thermal resistance (R): 0.145 m²K/W. Nominal thickness: 8 mm. Format: 10 x 1 m rolls with a 5 cm border along the sides. Weight: 1.8 kg/m². Packaging: pallets containing 160 m².
Mapesilent Tape
Adhesive sealing tape made in closedcell expanded polyethylene, ideal for sealing rolls and panels from the MAPESILENT range. It prevents the formation of acoustic bridges ensuring the seamlessness of the soundproofing system.
Mapesonic CR
Soundproofing mat in sheets of rubber and cork applied on substrates before installing ceramic, stone, resilient and multi-layered wooden floors.
Mapesonic GD 4 LVT
Low-thickness, high-density, sound proofing system, for LVT reinforced with glass fibre mesh, designed to block and reduce transmission of foot step noise through floors.
Mapesonic SA 4 LVT
Self-adhesive, low-thickness, high-density, sound proofing system, for LVT reinforced with glass fibre mesh, designed to block and reduce transmission of foot step noise through floors.
TECHNICAL DATA: Format: white roll. Width: 100 mm. Thickness: 3 mm. Length: 25 m. Packaging: 12 rolls box.
TECHNICAL DATA: Thickness: 2 mm and 4 mm. Format: – 20 x 1 m sheets (2 mm thick); – 10 x 1 m sheets (4 mm thick). Reduction of noise from footsteps EN ISO 140-8: 10 dB. Density (kg/m³): 700. Colours: brown-black. Tensile strength EN ISO 1798 (N/mm²): 0.6. Elongation at failure EN ISO 1798 (%): 20. Reduction of noise from footsteps EN ISO 10140-3: 10 dB. Certified: Technical Report N. PX21361-1. EMICODE: EC1 Plus - very low emission.
TECHNICAL DATA: Thickness: 1.5 mm. Size: 10 m x 1 m sheets. Weight: 1.1 kg/m². Dimensional stability (ISO 23999): <0.2%. Reduction of noise from footsteps (ISO 10140-1): 16 dB (for 2.5 mm thick LVT). EMICODE: EC1 Plus - very low emission. Packaging: 10 x 1 m (10 m²) rolls.
TECHNICAL DATA: Thickness: 1.7 mm. Size: 10 m x 1 m sheets. Weight: 1.1 kg/m². Dimensional stability (ISO 23999): <0.2%. Reduction of noise from footsteps (ISO 10140-1): 16 dB (for 2.5 mm thick LVT). EMICODE: EC1 Plus - very low emission. Packaging: 10 x 1 m (10 m²) rolls.
21
2. PRODUCTS FOR SOUNDPROOFING
Mapesonic Strip
Adhesive strip made in closed cell expanded polyethylene to be applied around the edge of flooring and any pillars passing through the flooring to prevent the formation of acoustic bridges along the perimeter of the walls, specific for use with MAPESONIC CR to ensure the seamlessness of the soundproofing system.
22
TECHNICAL DATA: Format: grey roll. Width: 50 mm. Thickness: 3 mm. Length: 11 m. Packaging: 4 rolls box.
23
PRIMERS, BONDING PROMOTERS, CONSOLIDATING AND WATERPROOFING PRODUCTS
3. PRIMERS, BONDING PROMOTERS, CONSOLIDATING AND WATERPROOFING PRODUCTS
Biblock
TECHNICAL DATA: Consistency: comp. A: thick liquid; comp. B: liquid. Colours: comp. A: straw yellow; comp. B: amber. Mixing ratio: comp. A : comp. B = 1 : 1. Workability time: 30-40 minutes. Storage: 24 months. Application: brush, roller or spray. Consumption: 0.10-0.15 kg/m². Packaging: 2.5 kg + 2.5 kg drums.
Two-component, epoxy curing product in water dispersion for concrete with consolidating and anti-dust properties. Suitable for not absorbent substrates before the application of TRIBLOCK P.
One-component, solvent-free, moisture curing polyurethane primer with a very low emission level of volatile organic compounds (VOC) for consolidating and waterproofing cementitious screeds.
Eco Prim PU 1K Turbo
One-component, solvent-free, moisture curing, rapid-drying polyurethane primer with a very low emission level of volatile organic compounds (VOC) for consolidating and waterproofing cementitious screeds.
26
L IA
G MATER IN
Eco Prim PU 1K
N SIO CLA IS
FOR BUILD SS
Ready-to-use bonding promoter and primer made from synthetic acrylic resin and silica inerts with a very low emission of volatile organic compounds (VOC) for render, smoothing and levelling compounds and adhesives for ceramic tiles.
EM
Eco Prim Grip
TECHNICAL DATA: Consistency: creamy liquid. Colour: grey. Waiting time before applying render: 15-20 minutes. Waiting time before applying smoothing compounds: 30 minutes. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: roller or brush. Consumption: 0.20-0.30 kg/m². Packaging: 10 kg and 5 kg drums.
TECHNICAL DATA: Consistency: liquid. Colour: brown. Set to light foot traffic: after 9-10 hours. Waiting time before laying parquet using reactive adhesives: min. 24 hours, max. 3 days. Waiting time before laying parquet or smoothing layer on surfaces sprinkled with quartz: 36 hours. EMICODE: EC1 - very low emission. Storage: 12 months. Application: roller or brush. Consumption: 0.2-0.4 kg/m². Packaging: 10 kg drums.
TECHNICAL DATA: Consistency: liquid. Colour: brown. Set to light foot traffic: 30-40 minutes. Waiting time before laying parquet using reactive adhesives: min. 2 hours, max. 24 hours. Waiting time before laying parquet or smoothing layer on surfaces sprinkled with quartz: 4 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: roller or brush. Consumption: 0.2-0.4 kg/m² per coat. Packaging: 10 kg drums.
Eco Prim T
TECHNICAL DATA: Consistency: fluid liquid. Colour: white. Dilution rate: not diluted on non-absorbent surfaces, 1 : 1 or 1 : 2 on absorbent surfaces. Waiting time before applying smoothing compounds: 1-5 hours depending on the surrounding conditions and the absorption of the substrate. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: roller or brush. Consumption: 0.10-0.20 kg/m². Packaging: 5 and 20 kg tanks.
Acrylic primer with a very low emission of volatile organic compounds (VOC) for absorbent and non-absorbent substrates also with residual of old adhesives. Suitable also as adhesion promoter for levelling compounds onto substrates treated with epoxy or polyurethane primers.
Eco Prim T Plus
TECHNICAL DATA: Consistency: liquid. Colour: light blue. Dilution rate: not diluted on non-absorbent substrates, 1 : 1 or 1 : 2 on absorbent substrates. Waiting time before applying the adhesive or the smoothing compound over: from 1 to 5 hours depending on the surrounding conditions and the absorbency of the substrate. EMICODE: EC1 Plus - very low emission. Storage: 24 months. Application: with a brush or a roller. Consumption: 0.10-0.20 kg/m². Packaging: 20 and 5 kg tanks.
Acrylic primer in water dispersion with very low emission of volatile organic compounds (VOC) for absorbent and non-absorbent substrates also with residual of old adhesives. Suitable also as adhesion promoter for levelling compounds onto substrates treated with epoxy or polyurethane primers.
Eco Prim VG
TECHNICAL DATA: Consistency: fluid liquid. Colour: light blue. Application temperature range: from +5°C to +35°C. Drying time: 15-20 minutes. Waiting time before applying the adhesive or the smoothing compound over: 1-3 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: roller or brush. Consumptions: 0.10-0.20 kg/m² depending on the porosity of the substrate and on how it is applied. Packaging: 1, 5 and 10 kg tanks.
Ready to use acrylic primer in water dispersion with very low emission level of volatile organic compounds (VOC). Suitable for preparing absorbent or porous substrates prior to installing selfadhesive and tack-dry loose lay LVT or MAPESONIC SA 4 LVT.
Eporip
Two component solvent-free epoxy adhesive for construction joints and for monolithic sealing of cracks in screeds.
EN 1504-4 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-4 STRUCTURAL BONDING
TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: black; comp. B: white. Mixing ratio: comp. A : comp. B = 3 : 1. Setting time: 24 hours. Workability time: 60 minutes (at +23°C). Open time: 5 hours (at +10°C). Storage: 24 months. Application: brush, trowel or by pouring. Consumption: for bonding 1.35 kg/dm³. Packaging: – 10 kg kits: (7.5 kg of component A, 2.5 kg of component B). – 2 kg kits: (1.5 kg of component A, 0.5 kg of component B).
27
3. PRIMERS, BONDING PROMOTERS, CONSOLIDATING AND WATERPROOFING PRODUCTS
Eporip SCR
Two-component, rapid-hardening, silicate-urethane resin for sealing cracks and joints and carrying out small repairs.
Eporip Turbo
Two-component, quick-hardening polyester resin for sealing of cracked screeds and for little repair works.
Livigum
Synthetic-resin based admixture in water dispersion to be added to cementitious mortar and smoothing compounds to improve mechanical performances and adhesion.
Malech
Water-based acrylic undercoat and bonding promoter with a smooth finish.
28
TECHNICAL DATA: Consistency: comp. A: liquid; comp. B: liquid. Mixing ratio (by volume): comp. A : comp. B = 1 : 1. Setting time: 45 mins. Workability time: 10-12 mins. Storage: 12 months. Application: extruded through nozzle on can. Packaging: boxes containing 6 (A+B) kits (comp. A: 300 ml; comp. B: 300 ml).
TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: grey; comp. B: white. Mixing ratio: comp. A : comp. B = 500 : 8. Setting time: 20-30 minutes. Workability time: 7 minutes. Storage: 12 months. Application: pouring. Consumption: 1.7 kg per dm³ of filled cracks. Packaging: 508 g metal cans (component A: 500 g; component B: 8 g).
Mixing ratio: 1. Preparation of skim layers and render up to 10 mm thick. Dilute LIVIGUM with water at a ratio of 1:2. Use this solution to mix the aggregates and cement. 2. Preparation of skim layers and render up to 20 mm thick. Dilute LIVIGUM with water at a ratio of 1:3. Use this solution to mix the aggregates and cement. 3. Admixture for PIANOCEM M. Partially replace the mixing water with 1.5-2 kg of LIVIGUM every 25 kg bag. 4. Primer for cementitious substrates. Dilute 1 part of LIVIGUM with 3-5 parts of water, depending on the absorption of the substrate. Consumption: 60-90 g/m² per mm of skimming; 1,5-2 kg bag of PIANOCEM M. Packaging: 25 kg tanks.
TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids content: (EN ISO 3251) (%): approx. 15. Dilution rate: ready-to-use; 30-50% of water for surfaces with low absorbency. Waiting time before applying other products: 24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.10-0.15 (kg/m²). Packaging: 2 and 10 kg.
Mapecoat I 600 W
Two-component transparent epoxy primer in water dispersion.
Mapecoat I 600 W Lucido
Two-component, shiny, transparent epoxy primer in water dispersion.
Planicrete
Synthetic rubber latex to improve adhesion and performances of cement mixes and prepare bonding slurries for screeds.
Primer 3296
Acrylic primer in water dispersion with high penetration, consolidating and antidust properties for screeds.
TECHNICAL DATA: Consistency of mix: fluid. Colour of mix: opaline. Mixing ratio: comp. A: comp. B = 2.3 : 3.6. Workability time: 2-3 hours. Dust dry at +23°C and 50% R.H.: 3-4 hours (first coat); 6-8 hours (second coat). Final hardening time: 7 days. Application temperature range: from +8°C to +35°C. Storage: 24 months in its original sealed packaging. Application: roller, spray or airless spray. Consumption: 300-500 g/m², depending on the absorbency rate of diluted product. Packaging: 5.9 kg kits and 11.8 kg kits (A + B).
TECHNICAL DATA: Consistency of mix: fluid. Colour of mix: opaline. Mixing ratio: comp. A: comp. B = 2.3 : 3.6. Workability time: 2-3 h. Dust dry at +23°C - 50% R.H.: – 3-4 h (first coat); – 6-8 h (second coat). Final hardening time: 7 days. Application temperature range: from +8°C to +35°C. Storage: 24 months in its original sealed packaging. Application: roller, spray or airless spray. Consumption: 300-500 g/m², depending on the absorbency rate of diluted product. Packaging: 5.9 kg kits (A + B).
TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 36%. Storage: 24 months. Consumption: – for bonding slurry: 100-150 g/m²; – to prepare screeds and renders: 50-80 kg/m³. Packaging: 5, 10 and 25 kg tanks and 12x1 kg packages.
TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2 according to the absorption of the substrate. Drying time: 1-5 days. Waiting time before laying with vinyl adhesive: when dry. Storage: 12 months. Application: brush, roller or watering can. Consumption: 0.1-0.5 kg/m². Packaging: 5 and 10 kg drums.
29
3. PRIMERS, BONDING PROMOTERS, CONSOLIDATING AND WATERPROOFING PRODUCTS
Mapeproof Primer
NEW
PVDC based primer in water dispersion for suppressing residual moisture up to 4,5% (95% R.H.) in cementitious screeds.
Primer BI
Synthetic resin primer in solvent, specific for improving adhesion of polyurethane coating products (from the PURTOP range) on existing bituminous membranes.
Primer EP
Two-component epoxy primer in solvents for consolidating and waterproofing cementitious screeds and industrial floors.
Primer EP Rustop
Two-component epoxy primer for metal surfaces.
30
TECHNICAL DATA Consistency: liquid. Colour: green. Number of recommended coats: apply in a minimum of two coats. With particularly low absorbent or finished screeds with a tight surface, first apply a dilute coat of MAPEPROOF PRIMER (1 : 1 with water), allow to dry (approx. 20 mins) and proceed with the others 2 coats. Waiting time between the first and second coat: 15-30 minutes. Waiting time before applying in the levelling compound: After complete drying of the primer (approx. 2-5 hours, max. 12 hours. Storage: 12 months. Application: roll or brush. Consumption: approx. 250 g/m² as a two coats application (coverage 3 m²/kg). Packaging: 10 kg tanks.
TECHNICAL DATA: Colour: transparent. Consistency: fluid liquid. Density according to EN ISO 2811-1 (g/cm³): 0.96. Dry solids content (%): 10. Storage: 24 months in its original sealed packaging. Application temperature range: from +5°C to +35°C. Ready for painting over: 2-4 hours. Drying time: 5-6 hours at +20°C. Consumption: 0.20 kg/m² per coat, depending on the type of the substrates. Packaging: 10 kg.
TECHNICAL DATA: Minimum waiting time: 24 hours according to the porosity of the substrate. Consistency: liquid. Colour: transparent. Mixing ratio: comp. A : comp. B = 1 : 1. Workability time: 4-5 hours. Storage: 24 months. Application: brush, roller or watering can. Consumption: 0.5-0.7 kg/m². Packaging: 5+5 kg drums.
TECHNICAL DATA: Mixing ratio: comp. A: comp B. = 100 : 30. Colour of mix: white. Consistency of mix: liquid. Dry substances content (%): 70. Density of mix (kg/m³): 1,100. Viscosity of mix (mPa·s): 500 (# 3 - 50 rpm). Workability time: 15-20 minutes at +20°C. Surface temperature: at least +10°C. Pot life: 6 h at +20°C. Varnishing: after 6-8 h at +20°C. Dusty dry: after 2 h at +20°C. Final hardening time: 24 h. Storage: 12 months in its original sealed packaging. Application: by brush, roller or airless spray system. Consumption: 0.2 kg/m². Packaging: 5 kg kits (A + B).
Primer G
L IA
N SIO CLA IS
FOR BUILD SS
EM
Synthetic resin primer in water dispersion with very low emission of volatile organic compounds (VOC).
G MATER IN
Primer G Conductive
Dark-coloured, solvent-free conductive synthetic resin primer in water dispersion.
Primer KL
Adhesion promoter in solvent for twocomponent epoxy, epoxy-polyurethane and polyurethane adhesives and thinner for PRIMER MF.
Primer M
One-component, solvent-free primer for polyurethane sealants, for use on absorbent and non-absorbent surfaces.
TECHNICAL DATA: Consistency: liquid. Colour: light blue. Dilution rate: from 1:1 to 1: 3 with water according to the absorption of the substrate. Drying time: 2 hours according to the dilution rate and the absorption of the substrate. Application: brush or roller. EMICODE: EC1 Plus - very low emission. Storage: 24 months. Protect from frost. Consumption: 0.1-0.2 kg/m² according to use. Packaging: 5, 10 and 25 kg drums and 12x1 kg boxes.
TECHNICAL DATA: Consistency: liquid. Colour: black. Drying time: minimum 2 hours. Electrical resistance: 50,000 ohm. Storage: 24 months. Protect from frost. Application: brush. Consumption: 0.1-0.15 kg/m². Packaging: 10 kg drums.
TECHNICAL DATA: Consistency: liquid. Colour: pinkish transparent. Dilution rate: PRIMER KL : PRIMER MF = 1: 6. Drying time: 5 minutes. Storage: 12 months. Application: cotton rag. Consumption: 0.3-0.4 kg/m². Packaging: boxes of 12x0.8 litre bottles and 8 kg metal drums.
TECHNICAL DATA: Consistency: liquid. Colour: brown. Inflammable: no. Application temperature: from +5°C to +35°C. Drying time: 40 minutes. Storage: 12 months. Application: brush. Consumption: 5-10 g/m (for a 1 cm deep joint). Packaging: 250 g bottles, 2 kg metallic drums.
31
3. PRIMERS, BONDING PROMOTERS, CONSOLIDATING AND WATERPROOFING PRODUCTS
Primer MF
TECHNICAL DATA: Consistency: liquid. Colour: transparent yellow. Mixing ratio: comp. A : comp. B = 3 : 1. Waiting time before laying floors or applying smoothing compound: 24-48 hours according to the surrounding temperature. Workability time: 90 minutes. Storage: 24 months. Application: brush or roller. Consumption: 0.20-0.40 kg/m². Packaging: 1 kg (A+B) and 6 kg (A+B) units.
Two-component, solvent-free epoxy primer for consolidating and waterproofing cementitious substrates.
L IA
N SIO CLA IS
FOR BUILD SS
Two-component, solvent-free, lowviscosity, epoxy primer with very low emission of volatile organic compounds for consolidating and waterproofing cementitious substrates.
EM
Primer MF EC Plus
G MATER IN
Primer P
One-component primer for sealants applied on plastics.
Primer P1
One-component solvent-based primer for polyurea coatings (from the PURTOP line) on plastic surfaces such as PVC.
32
TECHNICAL DATA: Consistency: liquid. Colour: transparent yellow. Mixing ratio: comp. A : comp. B = 4 : 1. Waiting time before laying floors or applying smoothing compound: 24 hours. Workability time: 40 minutes. EMICODE: EC1 Plus - very low emission. Storage: 24 months. Application: roller, brush or flat trowel. Consumption: 0.2-0.3 kg/m² per coat. Packaging: 5 kg units (A + B).
TECHNICAL DATA: Application of sealant: after 20’. Colours: transparent. Application: brush. Consumption: 5-10 g/m (for a 1 cm deep joint). Packaging: 150 g canisters.
TECHNICAL DATA: Consistency: transparent liquid. Colour: yellowish. Density (g/cm³): 0.86. Dry solids content (%): 10. Viscosity (mPa·s): approx. 33 (No. 1 rotor, 100 rpm). Application temperature: +5°C to +35°C. Recoat time (mins.): 30 to 60. Consumption: 0.1-0.2 kg/m². Packaging: 50 kg tanks.
Primer P2
One-component solvent-based primer for polyurea coatings (from the PURTOP line) on plastic surfaces such as TPO.
Primer P3
Two-component solvent-based polyurethane primer for products from the PURTOP line.
Primer PU60
Moisture curing polyurethane resin for consolidating and waterproofing damp screeds.
Primer S
Waterproofing primer in water dispersion.
TECHNICAL DATA: Consistency: transparent liquid. Colour: yellowish. Density (g/cm³): 0.89. Dry solids content (%): 10. Viscosity (mPa·s): approx. 22 (No. 1 rotor, 100 rpm). Application temperature: +5°C to +35°C. Recoat time (mins.): 30 to 60. Consumption: 0.1-0.2 kg/m². Packaging: 50 kg tanks.
TECHNICAL DATA: Consistency: comp. A liquid; comp. B liquid. Colour: comp. A transparent yellow; comp. B dark brown. A/B ratio (in weight): 100/24. Application temperature: +5°C to +35°C. Workability time (mins.): approx. 60. Consumption: approx. 50÷100 g/m² as adhesion promoter for polyurethane finishes; 150÷200 g/m² as primer for bitumen membranes. Packaging: 5+1.20 kg units (A+B); 1.24 kg units.
TECHNICAL DATA: Consistency: liquid. Colour: brown. Dilution ratio: from 25 to 100% with THINNER PU. Set to light foot traffic: 3-8 hours according to dilution ratio. Hardening time: 24 hours. Waiting time before laying with reactive adhesive: 2-7 days. Storage: 12 months. Application: brush, roller or watering can. Consumption: 0.4-1.2 kg/m². Packaging: 10 kg drums.
TECHNICAL DATA: Consistency: liquid. Colour: pink. Waiting time between each coat: 20-30 minutes. Waiting time before laying coating: approx. 12 hours. Application: brush or roller. Storage: 12 months. Protect from frost. Consumption: 0.1 kg/m² per coat. Packaging: 5 kg bottles.
33
3. PRIMERS, BONDING PROMOTERS, CONSOLIDATING AND WATERPROOFING PRODUCTS
Primer SN
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.
EN 13813
SR
SYNTHETIC RESINS
B2.0 BFL-s1
Prosfas
Water-based, solvent-free consolidator with high penetration properties for cementitious substrates.
Quartz 1.2
Calibrated silica sand to improve the bond on resin or epoxy primers.
Thinner for adhesives
N.B. Packaging approved according to ADR as specified in Ministerial Decree 22/2/1990.
34
TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: thick fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ± 100 (# 3 - rpm 50). Pot life: 30 min. Application temperature range: from +8°C to +35°C. Dust dry at +23°C and 50% R.H.: 6 hours. Set to light foot traffic at +23°C and 50% R.H.: 24 hours. Final setting time: 7 days. Storage: 24 months in its original sealed packaging. Application: flat trowel or flat rake. Consumption: 0.3-0.7 kg/m² per coat, depending on the absorbency and characteristics of the substrate. Packaging: 20 kg kits (A+B); 5 kg kits (A+B).
TECHNICAL DATA: Consistency: liquid. Colour: transparent. Drying time: according to the absorbency of the substrate. Storage: 24 months. Protect from frost. Application: brush, flat brush or roller Consumption: 0.5-0.7 kg/m². Packaging: 25 kg tanks.
TECHNICAL DATA: Colours: grey - beige. Grain size: 0.7-1.2. Packaging: 25 kg bags.
Thinner PU
Thinners for PRIMER PU60.
Triblock P
Three-component epoxy-cementitious primer for non-absorbent waterproofing damp substrates.
TECHNICAL DATA: Consistency: liquid. Colour: transparent. Inflammable: yes. Storage: 12 months. Consumption: 0.25-1 litre per litre of PRIMER PU60 according to dilution rate considered. Packaging: 9 kg drums.
TECHNICAL DATA: Consistency: comp. A liquid; comp. B liquid; comp. C powder. Colours: comp. A white; comp. B white; comp. C white. Mixing ratio: comp. A : comp. B : comp. C = 12 : 38 : 50. Workability time: 30-40 minutes. Waiting time between first and second coat: 4-6 hours. Waiting time before laying floors or applying smoothing compound: 18 hours. Maximum waiting time before laying floors or applying smoothing compound: 7 days. Storage: 24 months. Application: brush or roller. Consumption: 0.5 kg/m². Packaging: 5 kg drums (A+B+C).
35
ADHESIVES FOR CERAMIC TILES AND STONE MATERIAL
4. ADHESIVES FOR CERAMIC TILES AND STONE MATERIAL 4.1 Hydraulic binder based adhesives____________________________________________________________
Adesilex P4
EN 12004
IN CO MP LI
RDS NDA TA
MI CT ILES
ITH EUROPEA N CE W AN EN 12004 S
IT NT CEME
High-performance, self-buttering, quick-setting grey cementitious adhesive for ceramic tiles and stone material (thickness of adhesive from 3 to 20 mm). N.B. May also be used for smoothing internal and external surfaces.
IO A US CER ADHE SIVE FOR
Adesilex P9
EN 12004
IN COM PLI
RDS NDA TA
MI CT ILES
ITH EUROPEAN CE W AN EN 12004 S
IT NT CEME
High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials (layer of adhesive up to 5 mm). The white version has very high white balance and excellent workability.
IO A US CER ADHE SIVE FOR
Adesilex P9 Express
EN 12004 WITH EUROPEAN CE AN EN 12004 S
I TI T
OU
SA
ILES
AM
CE M EN
C2FE
IC T
IN COM PLI
RDS NDA TA
High performance, rapid-setting cementitious adhesive with extended open time for bonding ceramic tiles.
DHESIVE FOR C
ER
Adesilex P10
EN 12004
IN COM PLI
RDS NDA TA
MI CT ILES
ITH EUROPEAN CE W AN EN 12004 S
IT NT CEME
High-performance, white cementitious adhesive with no vertical slip and extended open time for glass mosaic, ceramic and marble coatings (thickness of adhesive up to 5 mm).
IO A US CER ADHE SIVE FOR
38
TECHNICAL DATA: Where to use: floors only. Pot life of mix: more than 60 minutes. Open time: 20 minutes. Waiting time before grouting: 4 hours. Set to light foot traffic: approx. 4 hours. Ready for use: approx. 24 hours. Colour: grey. Application: N° 6 or 10 notched rounded trowel. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Consumption: 4-10 kg/m². Packaging: 25 kg bags.
TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: ≥ 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to light foot traffic: approx. 24 hours. Ready for use: approx. 14 days. Colours: grey and white. Application: N° 4, 5 or 6 notched trowel. EMICODE: EC1 Plus - very low emission. Storage: 12 months (25 kg bags), 24 months (5 kg bags). Consumption: 2-5 kg/m². Packaging: 25 kg bags and 4x5 kg boxes.
TECHNICAL DATA: Pot life of mix: 45 minutes. Open time: 20 minutes. Waiting time before grouting: – walls: 4 hours; – floors: 4 hours. Set to foot traffic: approx. 4 hours. Ready for service: approx. 24 hours. Colours: grey and white. Application: N° 4, 5, 6 or 10 notched spreader. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Consumption: 2.5-5 kg/m². Packaging: 25 kg bags.
TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: ≥ 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to foot traffic: approx. 24 hours. Ready for service: approx. 14 days. Colours: grey and white. Application: N° 4, 5 or 6 notched spreader. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Consumption: 2-5 kg/m². Packaging: 25 kg bags and 4x5 kg Alupack boxes.
Elastorapid
EN 12004
IN COM PLI
RDS NDA TA
MI CT ILES
ITH EUROPEAN CE W AN EN 12004 S
TI NTI CEME
Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material (thickness of adhesive up to 10 mm).
C2FTE S2
OU RA SA DHESIVE FOR CE
Granirapid
TECHNICAL DATA: EN 12004
IN CO MP LI
RDS NDA TA
MI CT ILES
ITH EUROPEA N CE W AN EN 12004 S
IT NT CEME
Two-component, high-performance, deformable, quick-setting and drying cementitious adhesive for ceramic tiles and stone material (thickness of adhesive up to 10 mm).
C2F S1 IO A US CER ADHE SIVE FOR
Isolastic
Consistency: comp. A: powder; comp. B: thick liquid. Mixing ratio: comp. A: 25 kg + comp. B: 5.5 kg. Pot life of mix: 45 minutes. Application temperature range: from +5°C to +30°C. Open time: 20 minutes. Setting time: 2 hours. Set to light foot traffic: 3-4 hours. Ready for use: 24 hours. Colours available: grey and white. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: N° 4, 5, 6 or 10 notched trowel. Consumption: 3-8 kg/m². Packaging: GRANIRAPID white: 28 kg kit component A: 22.5 kg bag component B: 5.5 kg drum GRANIRAPID grey: 30.5 kg kit component A: 25 kg bag component B: 5.5 kg drum.
TECHNICAL DATA OF KERABOND/KERABOND T/ KERABOND PLUS+ISOLASTIC: Pot life of mix: more than 8 hours. Open time: 20 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24-36 hours. Set to light foot traffic: 24-36 hours. Ready for use: approx. 14 days. Deformability according to EN 12004: S2 - highly deformable (ADESILEX P10 + ISOLASTIC diluted 1:1 with water - S1 deformable). EMICODE: EC1 Plus - very low emission. Application: KERABOND/KERABOND T/KERABOND PLUS + ISOLASTIC: N° 4, 5 or 6 notched trowel. ADESILEX P10/SOLASTIC diluted 1:1 with water: N° 4, 5 or 6 notched trowel. Storage: 24 months. Protect from frost. Consumption: 1-2 kg/m². Packaging: 5 and 25 kg drums.
Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When KERABOND, KERABOND T and KERABOND PLUS are mixed with ISOLASTIC they form a high-performance, highly deformable adhesive with extended open time (C2E/S2). When ADESILEX P10 is mixed with ISOLASTIC (dilution rate 1:1 with water), it forms a high-performance, highly deformable adhesive with extended open time (C2E/S1).
Kerabond
EN 12004
RDS NDA TA
IT NT CEME
MI CT ILES
ITH EUROPEAN CE W AN EN 12004 S
IN COM PLI
Cementitious adhesive for ceramic tiles (thickness of adhesive up to 5 mm).
TECHNICAL DATA: Pot life of mix: 60-75 minutes. Open time: ≥ 30 minutes. Waiting time before grouting: 3 hours. Set to light foot traffic: approx. 2-3 hours. Ready for use: approx. 24 hours (3 days for basins and swimming pools). Deformability according to EN 12004: S2 - highly deformable. Colours: grey and white. Application: N° 4, 5, 6 or 10 notched trowel. Storage: comp. A: 12 months; comp. B: 24 months. Protect from frost. Consumption: 3-8 kg/m². Packaging: ELASTORAPID white: 31.25 kg kit comp. A: 25 kg / comp. B: 6.25 kg. ELASTORAPID grey: 31.25 kg kit comp. A: 25 kg / comp. B: 6.25 kg.
IO A US CER ADHE SIVE FOR
TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 20 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to light foot traffic: approx. 24 hours. Ready for use: approx. 14 days. Colours: grey and white. Application: N° 4, 5 or 6 notched trowel. EMICODE: EC1 Plus - very low emission. Storage: 12 months (25 kg bags), 24 months (5 kg bags). Consumption: 2-5 kg/m². Packaging: 25 kg bags and 4x5 kg Alupack boxes.
39
4. ADHESIVES FOR CERAMIC TILES AND STONE MATERIAL
Kerabond Plus
High-performance cementitious adhesive with extended open time for ceramic tiles and stone materials.
EN 12004
IN COM PLI
RDS NDA TA
IT NT CEME
MI CT ILES
ITH EUROPEAN CE W AN EN 12004 S
IO A US CER ADHE SIVE FOR
Kerabond T
Cementitious adhesive with no vertical slip for ceramic tiles (thickness of adhesive up to 5 mm).
EN 12004
IN COM PLI
RDS NDA TA
IT NT CEME
MI CT ILES
ITH EUROPEAN CE W AN EN 12004 S
IO A US CER ADHE SIVE FOR
Keracrete
EN 12004
TH EUROPEA E WI N NC EN 12004 S
ITI NT CEME
AM IC T ILES
RDS NDA TA
IN COM PLI A
Synthetic latex rubber mixed with sand and cement (thickness up to 5 mm).
OU ER SA DHESIVE FOR C
Keraflex
EN 12004
IN COM PLI
RDS NDA TA
MI CT ILES
ITH EUROPEAN CE W AN EN 12004 S
IT NT CEME
High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles (thickness of adhesive up to 5 mm).
IO A US CER ADHE SIVE FOR
40
TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: ≥ 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to foot traffic: approx. 24 hours. Ready for service: approx. 14 days. Colours: grey and white. Application: N° 4, 5 or 6 notched spreader. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Consumption: 2-5 kg/m². Packaging: 25 kg bags.
TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 20 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to light foot traffic: approx. 24 hours. Ready for use: approx. 14 days. Colours: grey and white. Application: N° 4, 5 or 6 notched trowel. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Consumption: 2-5 kg/m². Packaging: 25 kg bags.
TECHNICAL DATA: Pot life of mix: 90 minutes. Open time: 20 minutes. Waiting time before grouting: – on walls: 4-6 hours; – on floors: 24 hours. Set to light foot traffic: approx. 3 days. Ready for use: approx. 14 days (21 days for basins and swimming pools). Application: N° 5 or 6 or 10 notched trowel. Mixing ratio: 1 part by weight of KERACRETE, 2 parts by weight of cement (class 32.5), 2 parts by weight of sand; or 1 part by weight of KERACRETE, 1.5 parts by weight of cement (class 42.5), 2 parts by weight of sand; or alternatively 1 part by weight of KERACRETE, 1 part by weight of cement (class 52.5) and 2 parts by weight of sand. Storage: 24 months. Protect from frost. Consumption: 0.5-1 kg/m². Packaging: 25 kg drums.
TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: ≥ 30 minutes. Waiting time before grouting: – on walls: 4-6 hours; – on floors: 24 hours. Set to light foot traffic: approx. 24 hours. Ready for use: approx. 14 days. Colours: grey and white. Application: N° 4, 5 or 6 notched trowel. EMICODE: EC1 Plus - very low emission. Storage: 12 months (25 kg bags), 24 months (5 kg bags). Consumption: 2-5 kg/m². Packaging: 25 kg bags and 4x5 kg Alupack boxes.
Keraflex Easy S1
EN 12004
IN COM PLI
RDS NDA TA
MI CT ILES
ITH EUROPEAN CE W AN EN 12004 S
IT NT CEME
Easy-to-apply high-performance deformable cementitious adhesive with extended open time and high wetting capacity for ceramic tiles and stone materials. With very low emission of volatile organic compounds. Particularly recommended for bonding porcelain tiles on large spreads of flooring; applied in layers up to 10 mm thick.
C2E S1 IO A US CER ADHE SIVE FOR
Keraflex Maxi S1
EN 12004
IN COM PLI
RDS NDA TA
MI CT ILES
ITH EUROPEA N CE W AN EN 12004 S
IT NT CEME
High-performance, deformable cementitious adhesive with no vertical slip, extended open time, excellent workability and Low Dust technology for ceramic tiles, particularly recommended for bonding large porcelain and natural stone tiles (thickness of adhesive from 3 to 15 mm). With very emission of volatile organic compounds.
C2TE S1 IO A US CER ADHE SIVE FOR
Keraflex Maxi S1 Zerø
EN 12004
IN COM PLI
RDS NDA TA
MI CT ILES
ITH EUROPEA N CE W AN EN 12004 S
IT NT CEME
High-performance cementitious grey adhesive with no vertical slip, with Low Dust technology, extended open time and deformable with excellent workability. Suitable for laying largesized ceramic tiles and stone material, with very low emission level of volatile organic compounds and offset residual greenhouse gas emissions.
C2TE S1 IO A US CER ADHE SIVE FOR
Keraquick Maxi S1
EN 12004 IN COM PLI
RDS NDA TA
MI CT ILES
ITH EUROPEA N CE W AN EN 12004 S
IT NT CEME
High-performance, deformable, rapid-setting and hydrating, non-slip cementitious adhesive with very low emission of volatile organic compounds for ceramic tiles and in particular for stone, including large formats. Suitable for application in layers up to 15 mm thick.
C2FT S1 IO A US CER ADHE SIVE FOR
TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 mins. Waiting time before grouting: – on walls: 4-6 hours; – on floors: 24 hours. Set to foot traffic: approx. 24 hours. Ready for service: approx. 14 days. Colours: grey and white. Application: N° 4, 5, 6 or 10 notched spreader. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Consumption: 2-5 kg/m². Packaging: 25 kg bags.
TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: > 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to foot traffic: approx. 24 hours. Ready for service: approx. 14 days. Deformability according to EN 12004: S1 - deformable. Colour: white. Application: N° 4, 5, 6 or 10 notched spreader. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Consumption: 1.2 kg/m² per mm of thickness. Packaging: 23 kg bags.
TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: > 30 minutes. Waiting time before grouting: on walls: 4-8 hours; on floors: 24 hours. Set to light foot traffic: approx. 24 hours. Ready for use: approx. 14 days. Deformability according to EN 12004: S1 - deformable. Colours: grey. Application: N° 4, 5, 6 or 10 notched trowel. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Consumption: 1.2 kg/m² per mm of thickness. Packaging: 25 kg bags.
TECHNICAL DATA: Pot life of mix: 45 minutes. Open time: 20 minutes. Waiting time before grouting: 2-3 hours. Set to foot traffic: approx. 2-3 hours. Ready for service: approx. 24 hours (3 days for tubs and swimming pools). Deformability according to EN 12004: S1 - deformable. Colours: grey and white. Application: N° 4, 5, 6 or 10 notched trowel. EMICODE: EC1 Plus - very low emission. Storage: 12 months (23 kg and 25 kg bags), 24 months (5 kg bags). Consumption: 1.2 kg/m² per mm of thickness. Packaging: 23 kg and 25 kg bags and boxes of 4x5 kg Alupack.
41
4. ADHESIVES FOR CERAMIC TILES AND STONE MATERIAL
Keraset
Cementitious adhesive for ceramic tiles (thickness of adhesive up to 5 mm).
EN 12004
IN COM PLI
RDS NDA TA
IT NT CEME
MI CT ILES
ITH EUROPEAN CE W AN EN 12004 S
IO A US CER ADHE SIVE FOR
Latex Plus
TECHNICAL DATA OF LATEX PLUS + KERAQUICK MAXI S1: Pot life of mix: 45 minutes. Open time: 20 minutes. Waiting time before grouting: 2-3 hours. Set to light foot traffic: approx. 2-3 hours. Ready for use: approx. 24 hours. (3 days for basins and swimming pools). Deformability according to EN 12004: S2 - highly deformable. Application: N° 4, 5, 6 or 10 notched trowel. EMICODE: EC1 Plus - very low emission. Storage (LATEX PLUS): 24 months. Protect from frost. Consumption: to be calculated according to the amount of KERAQUICK MAXI S1 mixing ratio. Packaging: 10 kg drums.
Elasticising latex to be mixed with KERAQUICK MAXI S1. When KERAQUICK MAXI S1 is mixed with LATEX PLUS it forms a high-performance, quick-setting, highly-deformable adhesive (C2F/S2).
Tixobond White
EN 12004
IN COM PLI
RDS NDA TA
MI CT ILES
ITH EUROPEAN CE W AN EN 12004 S
IT NT CEME
High-performance, ultra-white cementitious adhesive with no vertical slip and long open time for ceramic tiles (thickness of adhesive up to 15 mm).
IO A US CER ADHE SIVE FOR
Ultralite Flex
IN COM PLI
MI CT ILES
ITH EUROPEAN CE W AN EN 12004 S
RDS NDA TA
42
EN 12004
IT NT CEME
One-component, high-performance lightweight cementitious adhesive with moderate deformability, no vertical slip, extended open time, Low Dust technology, very high yield, good trowellability and high wetting capacity for ceramic tiles, stone material and thin porcelain tiles.
TECHNICAL DATA: Pot life of mix: 6-8 hours. Open time: 20 minutes. Waiting time before grouting: – on walls: 3-6 hours; – on floors: 24 hours. Set to light foot traffic: approx. 24 hours. Ready for use: approx. 14 days. Colours: grey and white. Application: N° 4, 5 or 6 notched trowel. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Consumption: 2-5 kg/m². Packaging: 25 kg bags.
IO A US CER ADHE SIVE FOR
TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to light foot traffic: 24 hours. Ready for use: approx. 14 days. Colour: white. Application: N° 4, 5, 6 or 10 notched trowel. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Consumption: 1.2 kg/m² per mm of thickness. Packaging: 25 kg bags.
TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: > 30 minutes. Waiting time before grouting: 4-8 hours. Set to foot traffic: 24 hours. Ready for service: 14 days. Colour: white or grey. Application: N° 4, 5, 6 or 10 notched trowel. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Consumption: 0.8 kg/m² per mm of thickness, equivalent to 1.5-2.5 kg/m². Packaging: 15 kg bags.
Ultralite S1
EN 12004 IN COM PLI
RDS NDA TA
MI CT ILES
ITH EUROPEA N CE W AN EN 12004 S
IT NT CEME
One-component, high-performance, deformable, lightweight cementitious adhesive with no vertical slip, long open time, Low Dust technology and extremely high yield easy to apply by trowel, for ceramic tiles and stone material.
C2TE S1 IO A US CER ADHE SIVE FOR
Ultralite S1 Quick
EN 12004
IN COM PLI
RDS NDA TA
MI CT ILES
ITH EUROPEA N CE W AN EN 12004 S
IT NT CEME
One-component, high-performance, deformable, lightweight, rapid-setting and hydrating cementitious adhesive with no vertical slip, good trowelability, high wetting capacity and very high yield, for ceramic tiles, stone and thin porcelain tiles.
C2FT S1 IO A US CER ADHE SIVE FOR
Ultralite S2
EN 12004
IN COM PLI
RDS NDA TA
MI CT ILES
ITH EUROPEAN CE W AN EN 12004 S
IT NT CEME
One-component, high-performance, highly-deformable, lightweight cementitious adhesive with extended open time, very high yield, easy to trowel and good buttering capacity, for ceramic tiles and stone, ideal for thin porcelain tiles.
C2E S2 IO A US CER ADHE SIVE FOR
Ultralite S2 Quick
EN 12004 IN COM PLI
RDS NDA TA
MI CT ILES
ITH EUROPEA N CE W AN EN 12004 S
IT NT CEME
One-component, high-performance, highly-deformable, lightweight, rapidsetting and hydrating cementitious adhesive with extended open time, good trowelability, high wetting capacity and extremely high yield, for ceramic tiles and stone, ideal for installing thin porcelain tiles.
C2FE S2 IO A US CER ADHE SIVE FOR
TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: > 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to light foot traffic: approx. 24 hours. Ready for use: approx. 14 days. Deformability according to EN 12004: S1 deformable. Colour: grey and white. Application: N° 4, 5, 6 or 10 notched trowel. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Consumption: 1.5-2.5 kg/m². Packaging: 15 kg bags.
TECHNICAL DATA: Pot life of mix: 50 minutes. Open time: ≥ 20 minutes. Grouting of joints: – on walls: after 2-3 hours. – on floors: after 2-3 hours. Set to light foot traffic: 2-3 hours. Ready for use: 24 hours. Colours: grey and white. Application: N° 4, 5, 6 or 10 notched trowel. Deformability according to EN 12004: S1 - deformable. Storage: 12 months. Consumption: 1.5-2.5 kg/m². Packaging: 15 kg bags.
TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: > 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to light foot traffic: approx. 24 hours. Ready for use: approx. 14 days. Deformability according to EN 12004: S2 - highly deformable. Colour: grey and white. Application: n° 4, 5, 6 or 10 notched trowel. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Consumption: 0.8 kg/m² per mm of thickness, equivalent to 1.5-2.5 kg/m². Packaging: 15 kg bags.
TECHNICAL DATA: Pot life of mix: 50 minutes. Open time: ≥ 30 minutes. Grouting of joints: – on walls: after 2-3 hours. – on floors: after 2-3 hours. Set to light foot traffic: 2-3 hours. Ready for use: 24 hours. Colours: grey and white. Application: N° 4, 5, 6 or 10 notched trowel. Deformability according to EN 12004: S2 - highly deformable. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Consumption: 1.5-2.5 kg/m². Packaging: 15 kg bags.
43
4. ADHESIVES FOR CERAMIC TILES AND STONE MATERIAL 4.2 Synthetic resin-based adhesives_____________________________________________________________
Adesilex P22
EN 12004
IN COM PLI
RDS NDA TA
MI CT ILES
ITH EUROPEAN CE W AN EN 12004 S
SI ER DISP
Ready-to-use adhesive paste with no vertical slip and long open time for ceramic tiles (thickness of adhesive up to 5 mm).
ON A ADH ER ESIVE FOR C
Fix & Grout Brick
EN 12004
IN COM PLI
RDS NDA TA
MI CT ILES
ITH EUROPEAN CE W AN EN 12004 S
SI ER DISP
Ready to use, high-performance adhesive paste with BioBlock® mould-resistant technology for bonding brick slips and light weight cementitious and synthetic resin conglomerate decorative elements on internal and external surfaces.
D2T
ON A ADH ER ESIVE FOR C
Ultramastic III
EN 12004
IN COM PLI
RDS NDA TA
MI CT ILES
ITH EUROPEA N CE W AN EN 12004 S
SI ER DISP
Ready-to-use, high-performance adhesive paste with no vertical slip and long open time, for laying ceramic tiles on walls and floors (thickness of adhesive up to 5 mm).
ON A ADH ER ESIVE FOR C
TECHNICAL DATA: Where to use: walls only. Open time: ≥ 30 minutes. Waiting time before grouting: 24 hours. Ready for use: 7-14 days. Deformability: highly deformable. Colour: white. Application: N° 4 or 5 notched trowel. Storage: 24 months. Protect from frost. Consumption: 1.5-2.5 kg/m². Packaging: 5, 12 and 25 kg drums and 1x12 packs.
TECHNICAL DATA: Open time: 20 minutes. Adjustment time: 30-35 minutes. Grouting: clean off adhesive which runs out of the joint with a damp brush within 20 minutes (depending on surrounding conditions). Colours: white, grey and beige. Application: notched trowel or brush. Storage: 24 months. Consumption: 1.4-4.2 kg/m². Packaging: 12 kg drums.
TECHNICAL DATA: Open time: ≥ 30 minutes. Adjustment time: up to 35-40 minutes according to the absorption of the substrate, the tiles and the surrounding conditions. Waiting time before grouting: 12-24 hours. Set to light foot traffic: approx. 2 days. Ready for use: approx. 7 days. Deformability: highly deformable. Colour: white. Application: N° 4, 5 or 6 notched trowel. Storage: 24 months. Protect from frost. Consumption: – 1.5-2.5 kg/m² on walls; – 3-4 kg/m² on floors. Packaging: 1, 5, 12, 16 kg drums.
4.3 Reactive adhesives_______________________________________________________________________
Keralastic
Two-component, high-performance polyurethane adhesive for ceramic tiles and stone material.
EN 12004
IN COM PLI
RDS NDA TA
ITH EUROPEA NS CE W AN EN 12004
R
IN
44
AM
IO N
IC T
IL E S
R EA CT ES
A D H E SI V E F O R C
ER
TECHNICAL DATA: Open time: 50 minutes. Waiting time before grouting: 12 hours. Set to light foot traffic: approx. 12 hours. Ready for use: approx. 7 days. Deformability: highly deformable. Colours: grey and white. Application: N° 4 or 5 notched trowel. Storage: 24 months. Consumption: 2.5 -5 kg/m². Packaging: 5 and 10 kg units (A : B = 94 : 6 parts by weight).
Keralastic T
Two-component, high-performance polyurethane adhesive with no vertical slip for ceramic tiles and stone material.
EN 12004
IN COM PLI
RDS NDA TA
N TIO REAC
MI CT ILES
ITH EUROPEAN CE W AN EN 12004 S
RE RA SIN ADHESIVE FOR CE
Kerapoxy Adhesive
Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone material.
EN 12004
IN COM PLI
RDS NDA TA
N TIO REAC
MI CT ILES
ITH EUROPEAN CE W AN EN 12004 S
RE RA SIN ADHESIVE FOR CE
Ultrabond Eco PU 2K
EN 12004
IN COM PLI
RDS NDA TA
MI CT ILES
ITH EUROPEAN CE W AN EN 12004 S
N TIO REAC
Two-component, solvent-free, high performance, non-slip polyurethane adhesive with very low emission level of volatile organic compounds (VOC) for ceramic and stone tiles.
RE RA SIN ADHESIVE FOR CE
TECHNICAL DATA: Open time: 50 minutes. Waiting time before grouting: 12 hours. Set to light foot traffic: approx. 12 hours. Ready for use: approx. 7 days. Deformability: highly deformable. Colours: grey and white. Application: N° 4 or 5 notched trowel. Storage: 24 months. Consumption: 2.5 -5 kg/m². Packaging: 5 and 10 kg units (A:B = 94 : 6 parts by weight).
TECHNICAL DATA: Pot life of mix: 45 minutes. Open time: 60 minutes. Set to light foot traffic: approx. 10-12 hours. Ready for use: 2 days. Colours: grey and white. Application: suitable notched trowel. Storage: 24 months. Consumption: 1.5 kg/m² per mm of thickness. Packaging: 10 kg units.
TECHNICAL DATA: Open time: 20 minutes. Waiting time before grouting: 12 hours, Set to foot traffic: approx. 12 hours. Ready for service: approx. 7 days. Deformability: good. Colours: grey and white. Application: N° 4 or 5 notched spreader. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Consumption: 2.5 -5 kg/m². Packaging: 10 kg kit (A:B = 88:12 parts in weight).
45
GROUTS FOR CERAMIC TILES
5. GROUTS FOR CERAMIC TILES 5.1 Cementitious grouts_______________________________________________________________________
Fugolastic
Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF.
Keracolor FF
Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect® technology for grouting joints up to 6 mm wide.
Keracolor GG
Pre-blended, high-performance polymer-modified cementitious mortar for grouting joints 4 to 15 mm wide.
Keracolor SF
Fine-grained, high-performance white cementitious mortar for grouting joints up to 4 mm wide.
48
TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to light foot traffic: approx. 24 hours. Ready for use: 7-10 days. Application: rubber MAPEI trowel or rake. Finishing: MAPEI sponge or Scotch-Brite® pad. Storage: 24 months. Protect from frost. Consumption: according to the size of the joints. Packaging: 5, 10 kg drums and 12x1 kg packages.
TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to light foot traffic: approx. 24 hours. Ready for use: 7-10 days. Colours: 15. Application: rubber MAPEI trowel or rake. Finishing: MAPEI sponge or Scotch-Brite® pad. EMICODE: EC1 Plus - very low emission. Storage: 12 months (25 kg bags), 24 months (5 kg bags). Consumption: according to the size of the joints. Packaging: 25 kg bags and 4x5 kg Alupack boxes.
TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to light foot traffic: approx. 24 hours. Ready for use: 7-10 days. Colours: 14. Application: rubber MAPEI trowel or rake. Finishing: MAPEI sponge or Scotch-Brite® pad. EMICODE: EC1 Plus - very low emission. Storage: 12 months (22-25 kg bags), 24 months (5 kg bags). Consumption: according to the size of the joints. Packaging: 25 kg bags and 4x5 kg Alupack boxes, according to the colour.
TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to light foot traffic: approx. 24 hours. Ready for use: 7 days. Colour: white. Application: rubber MAPEI trowel or rake. Finishing: MAPEI sponge or Scotch-Brite® pad. EMICODE: EC1 Plus - very low emission. Storage: 12 months (22 kg bags), 24 months (5 kg bags). Consumption: according to the size of the joints. Packaging: 22 kg bags and 4x5 kg Alupack boxes.
Ultracolor Plus
TECHNICAL DATA: Pot life of mix: 20-25 minutes. Waiting time before finishing: 15-30 minutes. Set to light foot traffic: approx. 3 hours. Ready for use: 24 hours (48 hours for basins and swimming pools). Colours: 34. Application: rubber trowel. Finishing: MAPEI sponge or Scotch-Brite® pad. EMICODE: EC1 Plus - very low emission. Storage: – 12 months (23 kg bags); – 24 months (2 and 5 kg bags). Consumption: according to the size of the joints. Packaging: 23 kg bags and 4x5 kg Alupack and 8x2 kg Alupack boxes, according to the colour.
High-performance, anti-efflorescence, quick-setting and drying polymermodified mortar with water-repellent DropEffect® and mould-resistant BioBlock® technology for grouting joints 2 to 20 mm wide.
5.2 Epoxy grouts____________________________________________________________________________
Kerapoxy
EN 12004
IN COM PLI
RDS NDA TA
ITH EUROPEAN CE W AN EN 12004 S
MI CT ILES
N TIO REAC
Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm).
RE RA SIN ADHESIVE FOR CE
IO N
GR
O
A RE
CT
UT
IN COM PLI
RDS NDA TA
ITH EUROPEAN CE W AN EN 13888 S
RESIN
Kerapoxy CQ
IN COM PLI
RDS NDA TA
ITH EUROPEA NS CE W AN EN 12004
IL E S
IC T IN
R
ES
AM
IO N
A D H E SI V E F O R C
ER
IO N
GR
O
CT
UT
IN COM PLI
RDS NDA TA
ITH EUROPEAN CE W AN EN 13888 S
A RE
Product is certified by the University of Modena (Italy) according to ISO 22196:2007 standards as a grouting mortar protected against the formation and proliferation of micro-organisms
EN 12004
R EA CT
Two-component epoxy grout, easy to apply and excellent cleanability, with a bacteriostatic agent and BioBlock® technology, ideal for grouting ceramic tiles and mosaics. Can also be used as an adhesive.
RESIN
Kerapoxy Design
EN 12004
IN COM PLI
RDS NDA TA
ITH EUROPEA NS CE W AN EN 12004
IN
R
ES
AM
IO N
IC T
IL E S
R EA CT
A D H E SI V E F O R C
ER
ITH EUROPEAN CE W AN EN 13888 S
IO N
GR
O
A RE
CT
UT
IN COM PLI
RDS NDA TA
Two-component, anti-acid, decorative, translucent epoxy mortar for grouting glass mosaic, ceramic tiles and stone material, used in combination with MAPEGLITTER for a particularly attractive and high quality finish. May also be used as an adhesive.
RESIN
TECHNICAL DATA: Pot life of mix: 45 minutes. Open time: 30 minutes. Set to light foot traffic: approx. 24 hours. Ready for use: 4 days. After 4 days surfaces may be exposed to chemicals. Colours: 20. Application: suitable trowel. EMICODE: EC1 Plus - very low emission. Storage: 24 months. Consumption: - for grouting: according to the size of the joints; - for bonding: 2-4 kg/m². Packaging: 5 and 10 kg units and 12x2 kg boxes.
TECHNICAL DATA: Pot life of mix: 45 minutes. Set to light foot traffic: approx. 24 hours. Ready for use: after 4 days surfaces may be exposed to chemicals. Colours: 19. Application: rubber MAPEI trowel. Finishing: MAPEI cellulose sponge. EMICODE: EC1 Plus - very low emission. Storage: 24 months. Consumption: according to the size of the joints. Packaging: 3 kg units. 10 kg units for colours: 283 sea blue, 282 bardiglio grey, 100 white, 113 cement grey, 114 anthracite and 132 beige 2000.
TECHNICAL DATA: Pot life of mix: 45 minutes. Open time (adhesive): 30 minutes. Adjustment time (adhesive): 60 minutes. Set to light foot traffic: approx. 24 hours. Ready for use: after 4 days surfaces may be exposed to chemicals. Colours: 32. Application: suitable trowel. Finishing: MAPEI cellulose sponge. EMICODE: EC1 Plus - very low emission. Storage: 24 months. Consumption: according to the size of the joints. Packaging: 3 kg units.
49
5. GROUTS FOR CERAMIC TILES
MapeGlitter
Polyester, aluminium and epoxy resin metal-effect coloured glitter mixed with used for mixing with KERAPOXY DESIGN.
UT
IN COM PLI
GR
O
IO N
RESIN
ITH EUROPEAN CE W AN EN 13888 S
IO N
GR
O
CT
UT
IN COM PLI
A RE
Easy-to-apply, two-component, antiacid epoxy mortar with good cleanability properties for grouting joints at least 3 mm wide.
CT
RDS NDA TA
Kerapoxy P
A RE
Two-component epoxy mortar with extremely high chemical resistance for grouting joints at least 3 mm wide.
ITH EUROPEAN CE W AN EN 13888 S
RDS NDA TA
Kerapoxy IEG
RESIN
TECHNICAL DATA: Pot life of mix: 45 minutes. Set to light foot traffic: approx. 24 hours. Ready for use: 4 days. After 4 days surfaces may be exposed to chemicals. Colours: 113 and 130. Application: rubber MAPEI trowel. Finishing: Scotch Brite® pad and MAPEI sponge (or single-head rotary polisher with Scotch Brite® type abrasive felt disk and rubber rake). EMICODE: EC1 Plus - very low emission. Storage: 24 months. Consumption: according to the size of the joints. Packaging: 10 kg units.
TECHNICAL DATA: Pot life of mix: 45 minutes. Set to light foot traffic: approx. 24 hours. Ready for use: 4 days. After 4 days surfaces may be exposed to chemicals. Colours: 113. Application: rubber MAPEI trowel. Finishing: Scotch Brite® pad and MAPEI sponge (or single-head rotary polisher with Scotch Brite® type abrasive felt disk and rubber rake). Storage: 24 months. Consumption: according to the size of the joints. Packaging: 10 kg units.
TECHNICAL DATA: Maximum dosage: 10% by weight of KERAPOXY DESIGN. Colours: silver and light gold. 22 other colours available upon request. Packaging: boxes of 10x100 g packets.
5.3 Ready-to-use paste products________________________________________________________________
Flexcolor
Ready-to-use, polymer filler paste with water-repellent DropEffect® and mould-resistant BioBlock® technology for grouting joints in ceramic tiles 2 to 10 mm wide.
50
TECHNICAL DATA: Waiting time before finishing: from 15-20 minutes, according to surrounding conditions and absorption of the tiles. Set to light foot traffic: 48 hours. Ready for use: 7 days. Colours: 100 white, manhattan 2000 110, 111 silver-grey, medium grey 112 and 132 beige 2000. Application: rubber trowel. Finishing: Scotch-Brite® pad and MAPEI sponge. Storage: 12 months. Consumption: according to the size of the joints. Packaging: 5 kg drums.
100 799 103 710 700 111 110 112 282 720 728 113 115 116 174 119 114 120 137 130 290 131 138 729 132 133 134 139 141 135 152 142 147 136 144 146 149 145 143 172 170 162 171 173 283 182 183 150 151 165 999
WHITE WHITE MOON WHITE ICE WHITE TRANSLUCENT SILVER GREY MANHATTAN 2000 MEDIUM GREY BARDIGLIO GREY PEARL GREY DARK GREY CEMENT GREY RIVER GREY MUSK GREY TORNADO LONDON GREY ANTHRACITE BLACK CARIBBEAN JASMINE CREAM VANILLA ALMOND SAHARA YELLOW BEIGE 2000 SAND SILK PINK POWDER CARAMEL GOLDEN DUST LIQUORICE BROWN CAPPUCCINO MUD CHOCOLATE RICH BROWN VOLCANO SAND TERRA DI SIENA TERRACOTTA SPACE BLUE CROCUS BLUE VIOLET TURQUOISE OCEAN BLUE SEA BLU TORMALINE LIME GREEN YELLOW MUSTARD YELLOW CHERRY RED TRANSPARENT
LIGHT GOLD SILVER
● ● ● ●
● ● ●
●
●
● ● ●
● ● ● ● ● ●
● ● ● ● ● ● ● ● ●
● ● ●
●
● ●
● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
●
● ● ● ●
● ● ● ● ● ● ● ●
● ●
● ● ●
● ●
●
● ●
●
● ●
●
● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
● ●
Mapesil LM
Mapesil AC
Fix & Grout Brick
MapeGlitter
Kerapoxy Design
Kerapoxy P
Beauty which resists everything.
● ● ●
● ● ● ● ● ●
● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
● ●
● ●
Kerapoxy IEG
Kerapoxy CQ
Kerapoxy
Flexcolor
Keracolor PPN
Keracolor GG
Keracolor FF
Keracolor SF
Ultracolor Plus
Mapei Coloured Grouts
Mapei Coloured Grouts
● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ●
●
MOULD-RESISTANT
DURABLE AND STRONG
WIDE RANGE OF COLOURS
●
● ● ●
● ● ● ● ● ● ● ● ● ●
● ● ●
EASY TO CLEAN
A range of high-quality, highly-functional products rich in colour for internal and external use. Solvent-free, with very low emission of volatile organic compounds (VOC) and certified in compliance with the most strict international standards. Suitable for all types and formats of floors and walls: ceramic tiles, cotto, stone material, mosaics and metal. Available as cementitious, grouting paste and epoxy grout. Mapei Coloured Grouts. The choice that completes every project. From Mapei, world leader in the production of grouts and adhesives. Mapei is by your side: let’s take a deeper look together at www.mapei.it
● ●
● ●
● ● ● ● ● ● ●
● ● ●
●
● ● ●
● ●
Due to the printing processes involved, the colours should be taken as merely indicative of the shades of the actual products.
ADHESIVES • SEALANTS • CHEMICAL PRODUCTS FOR BUILDING
51
SYSTEMS FOR LAYING AND GROUTING ARCHITECTURAL STONE PAVING
6. SYSTEMS FOR LAYING AND GROUTING ARCHITECTURAL STONE PAVING
Keracolor PPN
High-strength, quick-setting pozzolan mortar with very low water absorption for grouting paved floors with joints from 5 to 30 mm wide subject to heavy loads and intense traffic. In compliance with UNI 11714-1:2018 standard
Mapestone Joint
One-component, solvent-free, non-flammable polyurethane binder with a characteristic odour for creating elastic and pervious architectural road surfaces. Areas of use: sealing grout lines between setts, paving bricks and cobblestones used to create architectural road; surfaces for vehicle use installing and sealing paving for pedestrian and light vehicle use.
TECHNICAL DATA: Pot life of mix: 20 minutes. Set to light foot traffic: 1 hour. Ready for use: 3 days for light to medium traffic, 7 days for heavy traffic. Colour: 113 cement grey. Application: rubber MAPEI trowel or rake. Cleaning: MAPEI sponge or Scotch Brite® pad (or single-head rotary polisher with Scotch Brite® type abrasive felt disk). As an alternative, hydro-cleaner once it has started to harden. Storage: 12 months. Consumption: according to the size of the joints and slabs. Packaging: 25 kg bags.
TECHNICAL DATA: Consumption: with 1 kg of MAPESTONE JOINT it is possible to seal 1 m² of approx. 8-10 cm setts. Packaging: 25 litre tanks, 20 kg drums and 1000 kg IBCS.
In compliance with UNI 11714-1:2018 standard
Mapestone Joint Cleaner
Specific odourless cleaner for residues of MAPESTONE JOINT and tools. It can be used for any type of stone.
Mapestone PFS 2
Pre-blended mortar for grouting architectonic stone floors with exceptional physical-chemical characteristics suitable for areas exposed to dry/damp cycles specified by exposure class XF4, with high compressive strength and good resistance to de-icing salts, freeze-thaw cycles and seawater. In compliance with UNI 11714-1:2018 standard
54
TECHNICAL DATA: Colour: transparent. Consumption: depends on the amount of dirt that needs to be removed. Packaging: is available in 5 litre and 25 litre drums.
TECHNICAL DATA: Pot life of mix: 20 minutes. Waiting time before putting into service: 7 days. Colour: basic and Dark Grey. Application: rubber MAPEI trowel or rake. Cleaning: wet sponge and then light, steady jet of water or with a suitable cleaning machine. Storage: 12 months. Consumption: according to the size of the joints slabs and stone. Packaging: 25 kg bag.
Mapestone PFS 2 Visco Low viscosity ready-mixed mortar with high compressive strength and resistant to de-icing salts, freeze-thaw cycles and seawater, with exceptional physical chemical characteristics suitable for areas exposed to dry/damp cycles specified by exposure class XF4. for grouting architectural slab and block-paved road surfaces.
In compliance with UNI 11714-1:2018 standard
Mapestone PFS PCC 2
Pre-blended, polymer-modified mortar with a low modulus of elasticity, high compressive strength and good resistance to de-icing salts, freeze-thaw cycles and seawater with exceptional physical-chemical characteristics suitable for areas exposed to dry/damp cycles specified by exposure class XF4, for grouting architectonic stone floors.
TECHNICAL DATA: Pot life of mix: 40 mins. Waiting time before putting into service: 7 days. Colour: basic and Dark Grey. Application: slurry poured into grout lines using suitable containers. Cleaning: wet sponge and then light, steady jet of water or with a suitable cleaning machine. Storage: 12 months; protect from moisture. Consumption: according to the thickness of the slabs/blocks and the width and depth of the grout lines. Packaging: 25 kg bags.
TECHNICAL DATA: Pot life of mix: 20 minutes. Waiting time before putting into service: 7 days. Colour: basic. Application: rubber MAPEI trowel or rake. Cleaning: wet sponge and then light, steady jet of water or with a suitable cleaning machine. Storage: 12 months. Consumption: according to the size of the joints and slabs. Packaging: 25 kg bag.
In compliance with UNI 11714-1:2018 standard
Mapestone Scraper
Acid-based cleaner for architectural stone paving.
Mapestone TFB 60
Pre-blended mortar with high compressive strength and good resistance to de-icing salts, freeze-thaw cycles and seawater with exceptional physical-chemical characteristics suitable for areas exposed to dry/damp cycles specified by exposure class XF4, for installation screeds for architectonic stone flooring.
TECHNICAL DATA: pH of the liquid: 1.1. Application: let the product act for 5-10 minutes, scrub with a brush or an abrasive sponge (medium grit Scotch Brite®) until all visible stains have disappeared. Storage: 24 months in the original packaging. Consumption: depending on the needs. Packaging: 25 kg plastic drums; 5 kg plastic drums; 1 kg bottles in boxes of 12x1 kg.
TECHNICAL DATA: Mixing ratio: 1 25 kg sack of MAPESTONE TFB 60 with 1.8-2 l of water. Waiting time before putting into service: 7 days. Grout joints with the products from the Mapestone PFS 2 range: fresh on fresh. Storage: 12 months. Consumption: 20 kg/m² per centimetre of thickness. Packaging: 25 kg bag.
In compliance with UNI 11714-1:2018 standard
55
6. SYSTEMS FOR LAYING AND GROUTING ARCHITECTURAL STONE PAVING
Mapestone TFB Cube NEW
Pre-mixed mortar for installation screed of architectural stone paving, suitable for class of exposure XF4 and XS3, with high compressive strength and resistance to de-icing salts, freeze-thaw cycles, and seawater. In compliance with UNI 11714-1:2018 standard
56
TECHNICAL DATA: Mixing ratio: 1 25 kg bag of MAPESTONE TFB CUBE with 1.8-2 l of water. Waiting time before putting into service: 7 days. Grout joints with the products from the MAPESTONE PFS 2 range: fresh on fresh. Storage: 12 months. Consumption: 20 kg/m² per centimetre of thickness. Packaging: 25 kg bag.
57
ELASTIC SEALANTS AND ADHESIVES
7. ELASTIC SEALANTS AND ADHESIVES 7.1 Acetic silicone sealants____________________________________________________________________
Mapesil 300°C
TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100% elongation: 0.60 N/mm². Shore A hardness: 20. Workability time: 6’ (+23°C, 50% R.H.). Colours: black. EMICODE: EC1 Plus - very low emission. Application: extrusion gun. Consumption: 3.0 linear metres per 300 ml cartridge (10x10 mm section). Packaging: 300 ml cartridge.
Acetic silicone sealant for high temperatures.
Mapesil AC
Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for movements up to 25%.
EN 15651
Mapesil U
Multi-purpose mould-resistant acetic silicone sealant for movements up to 20%.
EN 15651
Mapesil Z Plus
Mould-resistant acetic silicone sealant for sanitary fittings for movements up to 20%.
60
EN 15651
TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm². Shore A hardness: 20. Workability time: 10 minutes. Colours: 34 colours + transparent. EMICODE: EC1 Plus - very low emission. Application: extrusion gun. Consumption: 3.1 linear metres per 310 ml cartridge (10x10 mm section). Packaging: 310 ml cartridges.
TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100% elongation: 0.36 N/mm². Shore A hardness: 18. Workability time: 20 mins. Colours: transparent, white. Application: silicone gun. Consumption: 2.8 meters per 280 ml cartridge (10x10 mm section). Packaging: 280 ml cartridges.
TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100% elongation: 0.36 N/mm². Shore A hardness: 18. Workability time: 25’. Colours: transparent, white, 113 grey, 130 jasmine. EMICODE: EC1 Plus - very low emission. Application: extrusion gun. Consumption: 2.8 linear metres per 280 ml cartridge (10x10 mm section). Packaging: 280 ml cartridges.
7.2 Polyurethane sealants and adhesives_________________________________________________________
Mapeflex E-PU 21 SL
TECHNICAL DATA: Movement in service: 10%. Shore A hardness: 60. Workability time: 50 minutes. Set to traffic: 24-36 h. Colour: 113 grey. Application: by pouring. Consumption: 0.14 kg/linear metres (10x10 mm section). Packaging: 5 (A+B).
NEW
Two-component, high-strength, castable epoxy polyurethane sealant with high modulus of elasticity.
Mapeflex E-PU 30 NS
TECHNICAL DATA: Movement in service: 10%. Shore A hardness: 60. Workability time: 40 minutes. Set to traffic: 24-36 h. Colour: 113 grey. Application: trowel. Consumption: 0.14 kg/linear metres (10x10 mm section). Packaging: 5 (A+B).
NEW
Two-component, high-strength, epoxypolyurethane sealant with high modulus of elasticity.
Mapeflex PU35 CR
Polyurethane sealant with high modulus of elasticity, resistant to chemicals, suitable for clean rooms and environments with food and beverages.
EN 14187-4
EN 14187-6
TECHNICAL DATA: Movement in service (%): 25 (with PRIMER M or PRIMER A). Modulus of elasticity at 100% elongation: 0.8 N/mm². Shore A hardness (DIN 53505): 36. Workability time: 90 minutes. Colour: grey 113. EMICODE: EC 1 R Plus - very low emission. Application: extrusion gun. Consumption: 6.0 meters per 600 ml tube (10x10 mm section). Confezione: 600 ml soft-cartridge.
PRODUKT Z ATESTEM MAPEFLEX PU35 CR
Biol. Resistance: good
MAPEFLEX PU35 CR
Chemical Resistance: good
MAPEFLEX PU35 CR
Outgassing VOC (23°C/90°C): ISO-ACCm Class -7.3 / tested
Mapeflex PU 40
Paintable polyurethane sealant with a low modulus of elasticity for movements up to 25%.
EN 15651
TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.24 N/mm². Shore A hardness: 27. Workability time: 3 hours. Colours: white, grey 111, grey 112. Application: extrusion gun. Consumption: – 3.0 linear metres per 300 ml cartridge; – 6.0 linear metres per 600 ml soft-cartridges (10x10 mm section). Packaging: 300 ml cartridges, 600 ml soft-cartridges.
61
7. ELASTIC SEALANTS AND ADHESIVES
Mapeflex PU 45 FT
Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus of elasticity for movements up to 20%.
EN 15651
Mapeflex PU50 SL
Paintable, castable polyurethane sealant with a low modulus of elasticity for movements up to 25%.
Mapeflex PU 65
Two-component, castable polyurethane sealant for sealing joints in roads up to surface level, mixed with QUARTZ 0.5 sand at a ratio of up to 1:1 by weight. Setting and hardening may be accelerated by adding a specific liquid accelerator MAPEFLEX PU 65 CATALYST.
Mapeflex PU 70 NS
Two-component, thixotropic, polyurethane sealant with low modulus of elasticity, resistant to hydrocarbons, for movements up to 25%.
62
EN 15651
TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100% elongation: 0.80 N/mm². Shore A hardness: 38. Workability time: 35 mins. Colours: white, 111 grey, 113 grey, black, brown and beige. Application: silicone gun. Consumption: 3.0 meters per 300 ml cartridge, 6.0 meters per 600 ml tube (10x10 mm section). Packaging: 300 ml cartridge, 600 ml tube.
TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.25 N/mm². Shore A hardness: 22. Workability time: 2 hours. Colour: 111 grey. Application: pouring, pressure pump. Consumption: 6.0 linear metres per 600 ml soft-cartridge (10x10 mm section). Packaging: 600 ml soft-cartridges and 12 kg drums.
TECHNICAL DATA: Shore A hardness: 80. Workability time: 2-3 hours. Colour: black. Application: by pouring. Consumption: 1.2 kg/linear metres (10x10 mm section). Packaging: 10 kg drums (A+B).
TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.6 N/mm². Shore A hardness: 30. Workability time: 45 minutes. Colour: black. Application: spreader, extrusion gun. Consumption: 0.15 kg/metre (10x10 mm section). Packaging: 5 kg drums.
Mapeflex PU 70 SL
TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.30 N/mm². Shore A hardness: 18. Workability time: 45 mins. Colours: black. Application: pouring, pressure pump. Consumption: 0.15 kg/meter (10x10 mm section). Packaging: 10 kg drums (A+B).
Two-component free-flowing elastic polyurethane sealant with a low modulus of elasticity, for joints with movements up to 25% with low modulus of elasticity, resistant to hydrocarbons.
7.3 Neutral silicone sealants___________________________________________________________________
Mapesil BM
Neutral silicone sealant for metal-work for movements up to 25%.
EN 15651
Mapesil GP
Neutral mould-resistant silicone sealant for building work for movements up to 20%.
EN 15651
Mapesil LM
Neutral silicone mould-resistant sealant with BioBlock® technology for stone for movements up to 25%.
EN 15651
TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm². Shore A hardness: 25. Workability time: 15 minutes. Colours: transparent, grey, copper and dark brown. EMICODE: EC1 Plus - very low emission. Application: extrusion gun. Consumption: 3.1 linear metres per 310 ml cartridge (10x10 mm section). Packaging: 310 ml cartridges.
TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100% elongation: 0.37 N/mm². Shore A hardness: 24. Workability time: 35 mins. Colour: transparent, white, grey-white, grey, copper and dark brown. EMICODE: EC1 Plus - very low emission. Application: extrusion gun. Consumption: 2.8 linear metres per 280 ml cartridge (10x10 mm bead). Packaging: 280 ml cartridges.
TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm². Shore A hardness: 21. Workability time: 15 minutes. Colours: transparent, 100 white, 110 grey, 111 grey, 112 grey, 113 cement grey, 114 grey, 120 black, 130 jasmine and 132 beige (see “MAPEI Coloured Grouts”). Application: extrusion gun. Consumption: 3.1 linear metres per 310 ml cartridge (10x10 mm section). Packaging: 310 ml cartridges.
63
7. ELASTIC SEALANTS AND ADHESIVES 7.4 Hybrid sealants and adhesives______________________________________________________________
Mapeflex MS 40
Hybrid sealant with low modulus of elasticity also for wet substrates, for movements up to 25%.
EN 15651
Mapeflex MS 45
Paintable hybrid sealant and adhesive with a high modulus of elasticity also for wet substrates, for movements up to 20%.
EN 15651
PRODUKT Z ATESTEM
Mapeflex MS Crystal
Elastic high modulus, flexible, crystal clear, paintable, hybrid sealant and adhesive. Also suitable for damp surfaces.
EN 15651-1
EN 15651-3
TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.45 N/mm². Shore A hardness: 25. Workability time: 40 minutes. Colours: white, grey 111, grey 113. EMICODE: EC1 Plus - very low emission. Application: extrusion gun. Consumption: 6 metres per 600 ml sausage (10x10 mm section). Packaging: 600 ml sausage.
TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100% elongation: 0.66 N/mm². Shore A hardness: 43. Workability time: 35’ (+23°C, 50% R.H.). Colours: white, 113 grey, brown, black. EMICODE: EC1 Plus - very low emission. Certification: certificate for contact with drinking water. Application: extrusion gun. Consumption: 3.0 linear metres per 300 ml cartridge (10x10 mm section). Packaging: 300 ml cartridge, 600 ml sausages.
TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 10% elongation: 0.6 N/mm². Shore A hardness: 35. Workability time: 20 minutes. Colours: crystal clear. EMICODE: EC1 Plus - very low emission. Application: extrusion gun. Consumption: 3.0 linear metres per 300 ml cartridge (10x10 mm section). Packaging: 300 ml cartridges.
7.5 Other sealants___________________________________________________________________________
Mapeflex AC3
Paintable acrylic sealant with a smooth finish for movements up to 7.5%.
64
EN 15651
TECHNICAL DATA: Movement in service: 7.5%. Modulus of elasticity at 50% elongation: 0.20 N/mm². Shore A hardness: 53. Workability time: 20 minutes. Colours: white and grey. EMICODE: EC1 Plus - very low emission. Application: extrusion gun. Consumption: 3.1 metres per 310 ml cartridge (10x10 mm section). Packaging: 310 ml cartridge.
Mapeflex AC4
Paintable acrylic sealant for movements up to 12.5% with a smooth effect.
EN 15651
Mapeflex AC-FR 2
Paintable acrylic sealant for fire-break joints with movements up to 12.5%. Resistant to fire for up to 240 minutes. Certified according to EN 1366-4, EN 13501-1, EN 13501-2.
EN 15651
Mapeflex AC-P
Paintable acrylic sealant with a render-effect finish for movements up to 12.5%.
Mapeflex Blackfill Bituminen sealant.
EN 15651
TECHNICAL DATA: Movement in service: 12.5%. Modulus of elasticity at 50% elongation: 0.20 N/mm². Shore A hardness: 10. Workability time: 10 minutes. Colours: white and grey. EMICODE: EC1 Plus - very low emission. Application: extrusion gun, trowel, pneumatic pump. Consumption: 3.1 linear metres per 310 ml cartridge (10x10 mm section). Packaging: 310 ml cartridges and 550 ml softcartridges.
TECHNICAL DATA: Movement in service: 12.5%. Modulus of elasticity at 50% elongation: 0.11 N/mm². Shore A hardness: 15. Workability time: 15 minutes. Colour: grey. EMICODE: EC1 Plus - very low emission. Application: extrusion gun for sausages. Consumption: 5.5 meters per 550 ml sausage (10x10 mm section). Packaging: 550 ml sausage.
TECHNICAL DATA: Movement in service: 12.5%. Modulus of elasticity at 50% elongation: 0.11 N/mm². Shore A hardness: 15. Workability time: 15 minutes. Colour: white. EMICODE: EC1 Plus - very low emission. Application: extrusion gun, trowel. Consumption: 3.1 linear metres per 310 ml cartridge (10x10 mm section). Packaging: 310 ml cartridges.
TECHNICAL DATA: Movement in service: plastic product. Dry solids content: 90%. Elongation at failure: 65%. Colours: black. Application: extrusion gun, trowel. Consumption: 3.0 linear metres per 300 ml cartridge (10x10 mm section). Packaging: 300 ml cartridge.
65
7. ELASTIC SEALANTS AND ADHESIVES
Mapeflex Firestop 1200°C
Refractory grout or MAPEPUR GUN SPECIAL.
Ultrabond MS Rapid Rapid-setting, deformable, hybrid assembly adhesive for internal and external use, with a high initial sucker effect.
Ultrabond PU Strong Ultra-rapid assembly polyurethane adhesive for structural bonds of construction details for internal and external use.
Ultrabond Super Grip Acrylic, deformable assembly adhesive for internal use, with high initial sucker effect.
66
TECHNICAL DATA: Movement in service: none. Workability time: 6’ (+23°C, 50% R.H.). Final hardening time: 4 mm / 24 hours. Colours: grey. Application: extrusion gun, trowel. Consumption: 3.0 meters per 300 ml cartridge (10x10 mm section). Packaging: 300 ml cartridge.
TECHNICAL DATA: Viscosity: thixotropic paste. Open time: 5’. Initial tensile strength: 25 N. Final shear strength: 30 kg/cm². Hardening time: 2 h. EMICODE: EC1R Plus - very low emission. Colour: white. Application: gun. Consumption: 5 metres of bed (triangular section). Packaging: 300 ml cartridges.
TECHNICAL DATA: Viscosity: thixotropic paste. Open time: 4 minutes. Pressing time: 15-30 minutes. Resistance to moisture: (EN 204-D4). Colour: beige. Application: gun. Consumption: 15 metres (beads diameter 5 mm). Packaging: 300 ml cartridges.
TECHNICAL DATA: Viscosity: creamy thixotropic paste. Open time: 10-15 minutes. Initial tensile strength: 17 N. Final tensile strength: 32.5 kg/cm². Hardening time: 24-48 hours. Dry solids content: 70%. EMICODE: EC1 Plus - very low emission. Colour: white. Application: extrusion gun. Consumption: 15 metres of bed (5 mm diameter section). Packaging: 310 ml cartridges.
7.6 Adhesives for PVC________________________________________________________________________
Adesilex PVC
Adhesive for welding approved low pressure PVC pipes.
EN 14680
Adesilex PVC HP
Adhesive for welding approved low and high pressure PVC pipes.
EN 14814
EN 14680
TECHNICAL DATA: Viscosity: thick liquid. Dry solids content: 30%. Colour: transparent. Application: brush. Consumption: according to requirements. Packaging: 125 g tube.
TECHNICAL DATA: Viscosity: thick liquid. Dry solids content: 30%. Colour: red. Application: brush. Consumption: according to requirements. Packaging: 125 g tube.
7.7 Accessories and primers for sealants_________________________________________________________
Mapefoam
Closed-cell, extruded foam polyethylene cord used as a support for elastomer sealants to gauge the correct size of flexible joints. Supplied in rolls in various lengths according to the diameter of the foam.
Mapei Gun 310
Extrusion gun for 280, 300 and 310 ml cartridges of sealant and chemical anchor.
TECHNICAL DATA: Density: 40 kg/m³. Diameters and packaging: Ø 6 mm boxes of 550 m - bags of 10 m Ø 10 mm boxes of 550 m - bags of 10 m Ø 15 mm boxes of 550 m - bags of 10 m Ø 20 mm boxes of 350 m - bags of 10 m Ø 25 mm boxes of 200 m Ø 30 mm boxes of 160 m Ø 40 mm boxes of 270 m
TECHNICAL DATA: Maximum cartridge size: diameter 51 mm, length 218 mm. Suitable for the following MAPEI products: MAPESIL (all types), MAPEFLEX (one-component), ULTRABOND (one-component), MAPEFIX PE WALL 300, MAPEFIX PE SF 300, MAPEFIX VE SF 300. Weight: 920 g. Extrusion rate: 18:1. Pusher travel: 4.5 mm each pull of trigger.
67
7. ELASTIC SEALANTS AND ADHESIVES
Mapei Gun 310 PRO Extrusion gun for 280, 300 and 310 ml cartridges of sealant and chemical anchor.
Mapei Gun 420 2K
Extrusion gun for co-axial cartridges up to 420 ml of chemical anchor.
Mapei Gun 585 2K
Pro-grade sealant gun for 385, 470 and 585 ml bi-axial MAPEFIX cartridges.
Mapei Gun 600 PRO
Extrusion gun for 550 ml and 600 ml cartridges of sealant.
68
TECHNICAL DATA: Maximum cartridge size: diameter 51 mm, length 218 mm. Suitable for the following MAPEI products: MAPESIL (all types), MAPEFLEX (one-component), ULTRABOND (one-component). Weight: 830 g. Extrusion rate: 18:1. Pusher travel: 4.5 mm each pull of trigger.
TECHNICAL DATA: Maximum size of co-axial cartridge: diameter 63 mm, length 185 mm. Suitable for the following MAPEI products: MAPEFIX PE WALL 380, MAPEFIX PE SF 420, MAPEFIX VE SF 420. Weight: 1250 g. Extrusion rate: 24:1. Pusher travel: 3 mm each pull of trigger.
TECHNICAL DATA: Maximum size of bi-axial cartridge: diameter 54 + 30 mm, length 247 mm. Suitable for the following MAPEI products: MAPEFIX EP 385, MAPEFIX EP 470 SEISMIC, MAPEFIX EP 585. Weight: 1350 g. Extrusion rate: 24:1. Pusher travel: 3 mm each pull of trigger.
TECHNICAL DATA: Maximum size of bi-axial cartridge: diameter 51 mm, length 335 mm. Suitable for the following MAPEI products: MAPEFLEX (550 and 600 ml tubes). Weight: 1170 g. Extrusion rate: 18:1. Pusher travel: 4.5 mm each pull of trigger.
Mapei Gun 825 2K Extrusion gun for 825 ml bi-axial cartridges of chemical anchor.
Primer A
Polyurethane solvent-free primer for absorbent substrate to promote adhesion of MAPEFLEX one-component polyurethane sealants on all types of porous absorbent building substrates such as concrete, mortar, wood and brick.
Primer EP
Two-component epoxy primer in solvent for epoxy-polyurethane sealants.
Primer FD
One-component primer for silicone sealants.
TECHNICAL DATA: Maximum size of bi-axial cartridge: diameter 78 + 28 mm, length 216 mm. Suitable for the following MAPEI products: MAPEFIX VE SF 825. Weight: 1400 g. Extrusion rate: 24:1. Pusher travel: 3 mm each pull of trigger.
TECHNICAL DATA: Application: brush. Consumption: 5-10 g/m of 1 cm deep joint treated with primer. Packaging: 250 g and 2 kg canisters.
TECHNICAL DATA: Workability time after mixing: 4-5 hours. Application of sealant: after 24 hours. Colour: transparent. Application: brush and roller. Consumption: 5÷10 g/m (1 cm - deep joint). Packaging: 10 kg met. drums (A+B).
TECHNICAL DATA: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Application: brush. Consumption: 5÷10 g/m (1 cm - deep joint). Packaging: 200 g bottles.
69
7. ELASTIC SEALANTS AND ADHESIVES
Primer M
One-component solvent-free primer for polyurethane adhesives for non-absorbent surfaces.
Primer MF
Two-component, solvent-free epoxy primer for epoxy-polyurethane sealants.
Primer P
One-component primer for sealants applied on plastics.
Primer PU60
One-component primer for polyurethane sealants.
70
TECHNICAL DATA: Application of sealant: after 40 minutes. Colour: brown. Consumption: 5÷10 g/m (1 cm - deep joint). Packaging: 250 g bottles, 2 kg metallic drums.
TECHNICAL DATA: Consistency: liquid. Colour: transparent yellow. Mixing ratio: comp. A : comp. B = 3 : 1. Waiting time before laying floors or applying smoothing compound: 24-48 hours according to the surrounding temperature. Workability time: 90 minutes. Storage: 24 months. Application: brush. Consumption: 5÷10 g/m (1 cm - deep joint). Packaging: 6 kg (A+B) units and 1 kg kits (A+B).
TECHNICAL DATA: Application of sealant: after 20’. Colours: transparent. Application: brush. Consumption: 5÷10 g/m (1 cm - deep joint). Packaging: 150 g bottles.
TECHNICAL DATA: Application of sealant: after 24 hours. Colour: brown. Application: brush, roller or watering can. Consumption: 5÷10 g/m (1 cm - deep joint). Packaging: 10 kg metal drums.
7.8 Polyurethane foams___________________________________________________________________________
MapePUR All in One Foam
Multi-functional and multi-purpose, self-expanding polyurethane foam for filling, insulating and soundproofing. Thanks to the special spray nozzle, it is available for manual use or for use with the specific gun MAPEPUR GUN STANDARD or MAPEPUR GUN SPECIAL.
MapePUR Cleaner
Solvent-based cleaning solution for removing traces of wet polyurethane foam from clothes and tools. Spray on the surface to be cleaned or screw to a polyurethane foam gun.
MapePUR Fire Foam M Expanding polyurethane foam adhesive for filling, insulating and soundproofing. Certified fire resistant up to EI 240. Available in hand-held spray cans (MAPEPUR ROOF FOAM M).
MapePUR Multi Adhesive Foam G
Multi-purpose, low-expanding polyurethane foam adhesive for bonding construction elements, also made of different materials, both for internal and external use. Available in gun version for use with the specific gun MAPEPUR GUN STANDARD or MAPEPUR GUN SPECIAL.
TECHNICAL DATA: Free expansion: up to a 45 litres. Yield: 70 metres (beads diameter 30 mm), 10-12 m² of insulating panels. Insulating capacity: 0.039 W/(m K). Full hardening time: 2/6 hours. Colour: yellow. Packaging: 750 ml spray can.
TECHNICAL DATA: Colour: transparent. Packaging: 500 ml spray can.
TECHNICAL DATA: Free expansion: up to 45 litres. Insulating capacity MAPEPUR FIRE FOAM M: 0.039 W/(m K). Soundproofing capacity: 58 dB. Resistance to fire: EI 240 (joints up to 20 mm). Full hardening time: 1.5/5 hours. Colour: pink. Packaging: 750 ml spray can.
TECHNICAL DATA: Yield: 70 metres (beads diameter 30 mm), 10-12 m² of insulating panels. Insulating capacity: 0.036 W/(m K). Tensile strength (ETAG 004): 0.8 kg/cm². Reaction to fire (DIN 4102-1): B2. Reaction to fire (EN 13501-1): E. Colour: yellow. Packaging: 750 ml spray can.
71
7. ELASTIC SEALANTS AND ADHESIVES
MapePUR Roof Foam G MapePUR Roof Foam M Expanding polyurethane foam adhesive for bonding, filling, soundproofing and insulating. Available in gun version (MAPEPUR ROOF FOAM G) for use with MAPEPUR GUN STANDARD or MAPEPUR GUN SPECIAL and hand-held spray can version (MAPEPUR ROOF FOAM M).
MapePUR Universal Foam G MapePUR Universal Foam M
Multi-purpose expanding polyurethane foam for filling, soundproofing and insulating. Available in gun version (MAPEPUR UNIVERSAL FOAM G) for use with MAPEPUR GUN STANDARD or MAPEPUR GUN SPECIAL and handheld spray can version (MAPEPUR UNIVERSAL FOAM M).
TECHNICAL DATA: Free expansion: up to 45 litres. Insulating capacity MAPEPUR ROOF FOAM G: 0.036 W/(m K). Insulating capacity MAPEPUR ROOF FOAM M: 0.039 W/(m K). Soundproofing capacity: 58 dB. Tensile strength: 1.2 kg/cm². Full hardening time: 1.5/5 hours. Colour: grey. Packaging: 750 ml spray can.
TECHNICAL DATA: Free expansion: up to 45 litres. Insulating capacity MAPEPUR UNIVERSAL FOAM G: 0.036 W/(m K). Insulating capacity MAPEPUR UNIVERSAL FOAM M: 0.039 W/(m K). Soundproofing capacity: 58 dB. Full hardening time: 1.5/5 hours. Colour: yellow. Packaging: 750 ml spray can.
7.9 Accessories for foams_________________________________________________________________________
MapePUR Dispenser M Spare nozzle for MAPEPUR type “M”.
MapePUR Easy Spray
Ergonomic grip for polyurethane foam cans (manual application type).
72
TECHNICAL DATA: Packaging: bag of 12 nozzles. Suitable for the following MAPEI products: MAPEPUR UNIVERSAL FOAM M, MAPEPUR ROOF FOAM M, MAPEPUR FIRE FOAM M.
TECHNICAL DATA: Packaging: box of 5 grips. Suitable for the following MAPEI products: MAPEPUR UNIVERSAL FOAM M, MAPEPUR ROOF FOAM M, MAPEPUR FIRE FOAM M. Weight: 100 g.
MapePUR Gun Special NEW
Professional Teflon-coated extrusion gun for MAPEPUR type G (spray can to be used with guns).
MapePUR Gun Standard
Extrusion gun for MAPEPUR type G (spray can).
TECHNICAL DATA: Suitable for the following Mapei products: MAPEPUR G version ((spray can to be used with guns). Weight: 655 g. Nozzle: Ø 2 mm. Length of tube: 200 mm. Spray can adapter valve: universal with triple gasket for any type of spray can. Packaging: box containing 1 piece.
TECHNICAL DATA: Packaging: box with one adapter. Suitable for the following MAPEI products: MAPEPUR G type (spray can). Weight: 440 g. Nozzle: Ø 2 mm. Length of tube: 145 mm. Spray can adapter valve: universal conical type.
73
ADHESIVES AND FINISHING PRODUCTS FOR WOODEN FLOORS
8. ADHESIVES AND FINISHING PRODUCTS FOR WOODEN FLOORS 8.1 Adhesives for wooden and laminate floors________________________________________________________
Adesilex LC/R
Quick-setting, solvent-free adhesive in water dispersion for bonding wooden floors. ADESILEX LC/R is suitable for bonding on cementitious screeds made from MAPECEM, MAPECEM PRONTO, TOPCEM or TOPCEM PRONTO, wooden substrates, chip-board, masonite panels and heated floors.
Adesivil D3
Solvent-free, water-resistant vinyl adhesive for floating floors in prefinishes wood or rigid, melamine and laminated amino-plastic.
Lignobond
Two-component, water and solvent-free epoxy-polyurethane adhesive for laying parquet. Suitable for laying any size and type of wood on all substrates. Ideal for heated screeds.
Ultrabond Eco 575
Synthetic polymer adhesive in water dispersion for installing skirtings.
76
TECHNICAL DATA: Consistency: thick paste. Colour: beige. Open time: approximately 30 minutes. EMICODE: EC1 Plus - very low emission. Set to light foot traffic: after 24 hours. Polishing: when completely dry (minimum 10 days). Storage: 24 months. Protect from frost. Application: N° 2 or 4 notched trowel for wood. Consumption: 0.8-1.0 kg/m². Packaging: 15 kg drums.
TECHNICAL DATA: Consistency: thick liquid. Colour: white. Dry film: transparent. Open time: 5-10 minutes. Set to light foot traffic: after approx. 12 hours Complete hardening: approximately 24 hours. Resistance to water: class D3 (EN 204-205). Storage: 24 months. Protect from frost. Application: by extrusion from the nozzle on the canister. Consumption: 0.025 kg/linear metres; 0.1-0.2 kg/m². Packaging: 0.5 kg bottles.
TECHNICAL DATA: Consistency: comp. A: thick paste; comp. B: fluid paste. Colour: comp. A: dark brown or beige; comp. B: off-white. Mixing ratio: comp. A : comp. B = 90 : 10. Pot life of mix: 60 minutes. Open time: 1 hour. Setting time: 5 hours. Set to light foot traffic: after 24 hours. Sanding: after 3 days. Storage: 24 months. Application: N° 2 or 4 notched trowel for wood. Consumption: 800-1000 g/m². Packaging: 5 kg and 10 kg drums (A+B).
TECHNICAL DATA: Consistency: creamy paste. Colour: beige. Open time: 25 minutes. Final hardening time: 24 hours. EMICODE: EC1 Plus - very low emission. Storage: 24 months. Protect from frost. Application: extrusion. Consumption: 325 ml every 12 linear metres. Packaging: 310 ml cartridges.
Ultrabond Eco P909 2K
Two-component, solvent-free, polyurethane quick adhesive with very low emission level of volatile organic compounds, class EC1 Plus, for all types of parquet.
Ultrabond Eco P909 2K Fast
Two-component, solvent-free, polyurethane quick adhesive with very low emission level of volatile organic compounds (VOC) for all types of wood.
Ultrabond Eco P909 2K Plus
Two-component, solvent-free, polyurethane adhesive with very low emission level of volatile organic compounds (VOC) for all types of wood.
Ultrabond Eco S940 1K One-component solvent-free, silylated polymer-based adhesive with very low emission level of volatile organic compounds.
TECHNICAL DATA: Consistency: comp. A: paste; comp. B: liquid. Colour: comp. A: ochre; comp. B: dark brown. Mixing ratio: 9 : 1. Pot life of mix: 40-50 minutes. Open time: 60 minutes. EMICODE: EC1 Plus - very low emission. Consumption: 800-1000 g/cm². Storage: 12 months. Packaging: 9 + 1 kg kit.
TECHNICAL DATA Consistency: comp. A: paste; comp. B: liquid. Colour: comp. A: ochre; comp. B: dark brown. Mixing ratio: 9:1. Pot life of mix: 30-45 minutes. Open time: 60 minutes. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Consumption: 800-1000 g/m². Packaging: 10 kg (8.8 kg + 1.2 kg) units.
TECHNICAL DATA: Consistency: comp. A: paste; comp. B: liquid. Colour: comp. A: ochre; comp. B: dark brown. Mixing ratio: 9 : 1. Pot life of mix: 80-90 minutes. Open time: 80 minutes. EMICODE: EC1 Plus - very low emission. Consumption: 800-1000 g/m². Storage: 12 months. Packaging: 10 kg (9 kg + 1 kg) units.
TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Open time (formation of skin): 35 mins. Set to foot traffic: approx. 12 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: notched trowel for wood. Consumption: 800-1200 g/m². Packaging: 15 kg plastic drums.
77
8. ADHESIVES AND FINISHING PRODUCTS FOR WOODEN FLOORS
Ultrabond Eco S948 1K
TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Open time: 35 minutes. Set to light foot traffic: approx. 12 hours. Polishing: 3 days. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: MAPEI notched trowel for wood. Consumption: 800-1200 g/m². Packaging: 15 kg and 7 kg (2x7 kg) drums.
One-component, solvent-free, silylated polymer-based adhesive with very low emission level of volatile organic compounds (VOC).
L IA
N SIO CLA IS
FOR BUILD SS
One-component, solvent-free, silylated polymer adhesive with very low emission level of volatile organic compounds, for all types of parquet.
EM
Ultrabond Eco S955 1K
G MATER IN
Ultrabond Eco S958 1K One-component, solvent-free, silylated polymer-based adhesive with very low emission level of volatile organic compounds.
Ultrabond Eco S968 1K One-component silylated polymerbased adhesive with zero plasticiser and solvent content and very low emission level of volatile organic compounds (VOC).
78
TECHNICAL DATA: Consistency: creamy paste. Colour: beige. Open time: 50-60 minutes. Set to light foot traffic: after 12 hours. Sanding: after 3 days. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: N° 2 or 4 notched trowel for wood. Consumption: 800-1200 g/m². Packaging: 15 kg drums and 600 ml soft-cartridges.
TECHNICAL DATA: Consistency: creamy paste. Colour: beige. Open time (formation of skin): 30 minutes. Set to light foot traffic: 12 hours. Sanding (internal areas): 3 days. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: N° 2 or 4 notched trowel for wood. Consumption: 800-1200 g/m². Packaging: 15 kg drums and 600 ml soft-cartridges.
TECHNICAL DATA: Consistency: creamy paste. Colour: beige. Open time: 30 minutes. Set to light foot traffic: 12 hours. Polishing: 3 days. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: MAPEI notched trowel for wood. Consumption: 800-1200 g/m². Packaging: 15 kg drums.
Ultrabond Eco S Lite
One-component, lightweight, silylated polymer-based adhesive with zero solvent content and very low emission of volatile organic compounds ideal for the installation of all types of pre-finished or pre-polished multi-layered flooring and solid wood, medium format flooring.
Ultrabond Eco S Plus
One-component, silylated polymerbased adhesive of new generation and technology with very low emission of volatile organic compounds, zero methanol emissions, ideal for the installation of any type of species and format of pre-finished solid wood on all kinds of substrate, including heated screeds.
Ultrabond P902 2K
Two-component, epoxy-polyurethane adhesive for bonding all types and sizes of parquet on screeds made from MAPECEM, MAPECEM PRONTO, TOPCEM or TOPCEM PRONTO, cementitious screeds, old wooden, ceramic, marble, and terrazzo floors, etc. Also suitable for heated substrates.
Ultrabond P913 2K
Two-component, epoxy-polyurethane adhesive for medium-sized solid wooden slats and all types of pre-finished wooden floors.
TECHNICAL DATA: Consistency: creamy paste. Colour: light grey. Open time: 30 minutes. Set to light foot traffic: 12 hours. Polishing (in interior): 3 days. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: MAPEI notched trowel for wood. Consumption: 800 g/m². Packaging: 11 kg plastic drums.
TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Open time: 30 minutes. Set to light foot traffic: 12 hours. Polishing (in interior): 3 days. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: MAPEI notched trowel for wood. Consumption: 800-1200 g/m². Packaging: 15 kg plastic drums.
TECHNICAL DATA: Consistency: comp. A: paste; comp. B: paste. Colour: comp. A: beige or brown; comp. B: off-white. Mixing ratio: comp. A : comp. B = 90 : 10. Pot life of mix: 60-70 minutes. Open time: 1 hour. Set to light foot traffic: after 24 hours. Sanding: after 3 days. Storage: 24 months. Application: N° 2 or 4 notched trowel for wood. Consumption: 1.0-1.5 kg/m². Packaging: 10 kg drums (A+B).
TECHNICAL DATA: Consistency: comp. A: paste; comp. B: paste. Colour: comp. A: beige or brown; comp. B: beige. Mixing ratio: comp. A : comp. B = 90 : 10. Pot life of mix: 60 minutes. Open time: 60 minutes. Set to light foot traffic: after 24 hours. Sanding: after 3 days. Storage: 24 months. Application: notched trowel for wood. Consumption: according to the type of substrate. Packaging: 10 kg drums (A+B).
79
8. ADHESIVES AND FINISHING PRODUCTS FOR WOODEN FLOORS
Ultrabond P980 1K
One-component, solvent-free polyurethane adhesive with a very low emission level of volatile organic compounds for bonding pre-finished, multi-layered parquet.
Ultrabond P990 1K
One-component, ready-to-use, solventfree, flexible polyurethane adhesive for all types of parquet on screeds made from MAPECEM, MAPECEM PRONTO, TOPCEM and TOPCEM PRONTO, cementitious screeds, old wooden, ceramic, marble and terrazzo floors, etc. Also suitable for heated substrates.
Ultrabond S965 1K
One-component, solvent-free, silylated polymer adhesive with very low emission level of volatile organic compounds, for all types of parquet.
Ultrabond S997 1K
One-component, solvent-free, ready-to-use, flexible, sililate polymerbased thixotropic adhesive for laying wooden steps and parquet mosaic.
80
TECHNICAL DATA: Consistency: creamy paste. Colour: beige. Inflammable: no. Application temperature range: from +10°C to +25°C. Open time: 110 minutes. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: notched trowel. Consumption: 0.8-1 kg/m². Packaging: 15 kg aluminium bags contained in plastic drums.
TECHNICAL DATA: Consistency: creamy paste. Colour: beige and brown. Open time: 110 minutes. Set to light foot traffic: after 12 hours. Sanding: after 3 days. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: N° 2 or 4 notched trowel for wood. Consumption: 0.8-1 kg/m². Packaging: 7 and 15 kg aluminium bags contained in plastic drums. Boxes containing 20x600 cc soft-cartridges.
TECHNICAL DATA: Consistency: creamy paste. Colour: beige. Open time: 90-100 minutes. Set to light foot traffic: after 12 hours. Sanding: after 3 days. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: N° 2 or 4 notched trowel for wood. Consumption: 800-1200 g/m². Packaging: 15 kg plastic drums.
TECHNICAL DATA: Consistency: thixotropic paste. Colour: ochre yellow. Open time: approx. 40 ± 10 minutes. EMICODE: EC 1 R Plus - very low emission. Set to foot traffic: after 12 hours. Storage: 12 months. Application: extrusion. Consumption: – laying wooden steps: 2 m² per soft-cartridge (diagonal beads every 5-10 cm); – laying three-layered pre-finished parquet: 4/6 m² per soft-cartridge (diagonal beads every 10-15 cm); – laying wooden baseboards: approximately 15 meters of beads of adhesive per soft-cartridge; – laying parquet mosaic on walls: 0.5 kg/m². Packaging: boxes containing 20 x 600 cc aluminium tubes.
8.2 Paints, stuccos, oils, base coats and coloured sealants for parquet____________________________________
Silwood
Acrylic sealant in water dispersion for wooden floors.
Ultracoat Aqua Plus
Solvent and NMP-free, odourless, water-based binder, mixed with wood flour filler, for grouting wooden floors. Suitable for ULTRACOAT water-based varnishing cycles and ULTRACOAT HARD OIL FAST.
Ultracoat Base One
One-component quick-drying waterbased basecoat primer with low emission level of volatile organic compounds and no NMP.
Ultracoat Binder
Solvent and NMP-free, water-based binder, mixed with wood flour filler from any type of wood, including Merbau, for grouting wooden floors. Suitable for ULTRACOAT water-based varnishing cycles and ULTRACOAT HARD OIL FAST.
TECHNICAL DATA: Consistency: creamy paste. Colour: white, 112 grey, oak, iroko, doussié, wengé, teak, walnut, cherry, faded beech, birch maple. Open time: 10-20 minutes. Sanding: after 24 hours. After sanding, the product may be varnished. EMICODE: EC1 - very low emission. Storage: 24 months. Application: extrusion pistol loaded with cartridge of product. Consumption: according to the size of the joint to be filled, calculating that its density is equal to 1.75 g/cm³. Packaging: 310 ml cartridges.
TECHNICAL DATA: Consistency: liquid gel. Colour: off-white. Density (g/cm³): 1.0. Brookfield viscosity (mPa·s): 2000-3000. Storage: 12 months. Application temperature range: from +10°C to +35°C. Sanding: after approx. 1 hour. Varnishing: after 2 hours with water-based varnish cycles. EMICODE: EC1 Plus - very low emission. Consumption: 100-120 g/m² per coat. Packaging: 5 litre tanks, 2x5 l boxes.
TECHNICAL DATA: Consistency: liquid. Colour: translucent straw-yellow. Density: 1,030. Sanding: 1-2 hours. Re-varnishing (without sanding): minimum 2 hours maximum 16 hours. EMICODE: EC1 Plus - very low emission. Consumption: 100 ml/m². Storage: 12 months. Packaging: 5 l tanks, 2x5 l boxes.
TECHNICAL DATA: Consistency: liquid gel. Colour: transparent. Density (g/cm³): 1.0. Brookfield Viscosity (mPa·s): 6000/8000. Storage: 12 months. Application temperature range: from +10°C to +35°C. Sanding: after approx. 1 hour. Varnishing: after 100-120 mins. with water-based varnishing cycles. EMICODE: EC1 Plus - very low emission. Consumption: 100-120 g/m² per coat. Packaging: 5 litre tanks.
81
8. ADHESIVES AND FINISHING PRODUCTS FOR WOODEN FLOORS
Ultracoat Easy
One-component water-based acrylicpolyurethane varnish for wooden floors with good resistance to wear and abrasion. Suitable for floors subjected to normal pedestrian use.
Ultracoat Easy Plus
One-component, water-based 100% polyurethane varnish with low emission level of volatile organic compounds (VOC), highly resistant to wear and abrasion, for wooden floors. Suitable for floors subject to frequent pedestrian use.
TECHNICAL DATA: Consistency: liquid. Colour: milky white. Density (g/cm³): approx. 1.045 (10 gloss) - approx. 1.040 (30 gloss) - approx. 1.038 (60 gloss). Storage: 12 months. Dust dry: 20 mins. Touch dry: 35-40 mins. Maximum permitted dilution ratio (Dir. 2004/42/CEE): 10% with clean water or with ULTRACOAT EL. Sanding: after 3 hours. Painting over without sanding: after 2 hours, and within a maximum of 5 hours. Ready for use: 36-48 hours. Gloss factor: 10 gloss - 30 gloss - 60 gloss. Consumption: first coat 80-100 ml/m²; successive coats 50-70 ml/m². Packaging: 5 litre tanks, 2x5 l boxes.
TECHNICAL DATA: Consistency: liquid. Colour: transparent. Density (g/cm³): 1.045. Storage: 12 months. Dust dry: 20 mins. Touch dry: 35-40 mins. Maximum permitted dilution ratio (Dir. 2004/42/CEE): 10% with clean water or with ULTRACOAT EL. Sanding: after 8 hours. Painting over without sanding: after 2 hours, and within a maximum of 5 hours. Ready for use: 36-48 hours. Gloss factor: extra matte (10 gloss - 30 gloss - 60 gloss).
EMICODE: EC1 Plus - very low emission.
Consumption: first coat 80-100 ml/m²; successive coats 50-70 ml/m². Packaging: 5 litre tanks, 2x5 l boxes.
Ultracoat EL
Slow-evaporating mixture to increase the open time of varnish for parquet.
Ultracoat Filler S1
Alcohol/solvent-based ultra quick-drying filler mixed with sawdust formed by sanding and polishing the floor.
82
TECHNICAL DATA: Consumption: from 5% to 10% of the consumption of the varnish according to the dilution rate. Packaging: 1 litre drums, 6x1 l boxes.
TECHNICAL DATA: Appearance: colourless. Temperature of substrate: minimum +15°C. Dilution: supplied ready to use. Drying time: touch dry approx. 15 minutes at +20°C and 50% RH. Cleaning: white spirit or similar. Consumption: approx 80-120 ml/m². Storage: 2 years in a sealed container at +20°C. Packaging: 5 litre tanks.
Ultracoat Hard Oil Fast
TECHNICAL DATA: Consistency: liquid. Colours: neutral or as per product colour chart. Density (kg/l): 1.015. Application temperature range: +10°C/+ 30°C. Application: roller, brush. Removal time: 30-60 minutes. Consumption: 1 litre every 20-25 m² depending on the absorption. Packaging: 1 and 3 l bottles.
Wood staining oil for finishing off the surface of wooden floors; available in neutral and various colours.
Ultracoat Hard Oil Hardener NEW
TECHNICAL DATA: Consistency: thick liquid. Colour: transparent. Density: 1 kg/litre. Packaging: 600 ml bottles and boxes containing 6 100 ml bottles.
Admixture specific to promote hardening of ULTRACOAT HARD OIL FAST.
Ultracoat HT 2K
ON
AN
SYSTE M
T
TRACOA UL
FIR E R E SIST
Two-component, 100% polyurethane water-based varnish with high resistance to wear and abrasion with low emission of volatile organic compounds (VOC) for wooden floors. Suitable for floors subject to extremely high pedestrian use.
T P R OT E CT
I
Ultracoat HT A-S
ON
AN
SYSTE M
T
TRACOA UL
FIR E R E SIST
Two-component, 100% polyurethane water-based varnish for wooden floors with R9 rated non-slip properties, high resistance to wear and abrasion and very low emission of volatile organic compounds. Suitable for floors exposed to extreme levels of foot traffic.
T P R OT E CT
I
TECHNICAL DATA: comp. A comp. B Consistency: liquid liquid Colour: off-white transparent Density of Ultracoat High Traffic 10 gloss (g/cm³): 1.040 1.060 Density of Ultracoat High Traffic 30 gloss (g/cm³): 1.030 1.120 Density of Ultracoat High 1.080 Traffic 60 gloss (g/cm³): 1.040 EMICODE: EC 1 R Plus - very low emission. Storage: 12 months. Dusty dry: 25 mins. Touch dry: 40 mins. Maximum permitted dilution ratio (Dir. 2004/42/EEC): 10% with clean water. EMICODE: EC1 Plus - very low emission. Sanding: after 12 hours. Varnishing (without sanding): after 2 hours, within 5 hours. Ready for service: 36-48 hours. Gloss factor: (0-10-30-60 gloss). Consumption: first coat 80-100 ml/m²; successive coats 50-70 ml/m². Packaging: 11 l kits (A+B) 2x5.5 l.
TECHNICAL DATA: comp. A comp. B Consistency: liquid liquid Colour: off-white transparent Density of Ultracoat HT 1.060 Anti Slip 10 gloss (g/cm³): 1.040 Density of Ultracoat HT 1.120 Anti Slip 30 gloss (g/cm³): 1.030 Storage time: 12 months. Dust dry: 25 mins. Touch dry: 40 mins. Maximum permitted dilution (Dir. 2004/42/EEC): 10% with clean water. EMICODE: EC1 Plus - very low emission. Sanding: after 12 hours. Recoat time (without sanding): min. 2 hours, max. 5 hours. Ready for service: 36-48 hours. Gloss: (0-10-30). Consumption: 80-100 ml/m² first coat, 50-70 ml/m² successive coats. Packaging: 11 litre kit (A+B) 2x5.5 litre packs.
83
8. ADHESIVES AND FINISHING PRODUCTS FOR WOODEN FLOORS
Ultracoat HT Sport
Two-component, water-based polyurethane varnish for wooden playing surfaces. ULTRACOAT HT SPORT complies with European standards for indoor playing surfaces and multi-purpose playing surfaces (EN 14904:2006). Its surface hardness combined with its strength and resistance to chemicals make ULTRACOAT HT SPORT a highly reliable product.
Ultracoat MT 2K
Two-component water-based acrylic/polyurethane varnish for wooden floors with high resistance to wear and abrasion; certified EMICODE EC1 Plus very low emission level of volatile organic compounds. Suitable for floors subjected to medium to high pedestrian use.
Ultracoat Oil Care Plus
Watery micro-emulsion based on waxy resin, modified oils and natural waxes for maintaining wooden floors finished with ULTRACOAT HARD OIL FAST.
Ultracoat Oil Wax
Water and oil-repellent oil/wax finish with very little odour used to protect wooden surfaces and give them a delicate, warm colour.
84
TECHNICAL DATA: comp. A comp. B Consistency: liquid liquid Colour: milky white transparent Density: 1.035 1.075 Mixing ratio: (A : B) 10 : 1. Viscosity of mix: 40 secs. (Ø 3 Ford cup). EMICODE: EC1 Plus - very low emission. Buffing: 8 hours. Ready for service: 48 hours. Storage: 12 months. Packaging: 5.5 l.
TECHNICAL DATA: Consistency: comp. A - milky liquid, comp. B - liquid. Colour: comp. A - off-white, comp. B - transparent. Mixing ratio (A : B): 10 : 0.25. EMICODE: EC1 Plus - very low emission. Sanitair (France): A. Dust dry: 25 mins. Touch dry: 40 mins. Maximum permitted dilution ratio (Dir. 2004/42/EEC): 10% with clean water. Sanding: after 12 hours. Re-varnishing (without sanding): after 2 hours and within 5 hours. Gloss: seidenmatt - matt. Önorm C2354: class C. Storage: 12 months in its original, sealed packaging in a dry place. Consumption: 80-100 ml/m² for the first coat and 50-70 ml/m² for the next coats. Packaging: kit (A+B) - 4.5 l + 0.25 l.
TECHNICAL DATA: Consistency: liquid. Storage: 12 months. Application: wax spreader. Set to light foot traffic: 2 hours. Consumption: 25/35 m²/l per coat. Packaging: 1 l bottle.
TECHNICAL DATA: Consistency: fluid. Appearance: oil. Colour: neutral. Density (g/cm³): 0.8. Application temperature: +10°C - +25°C. Application: roller, brush, pad or trowel. Removal time: after 35-45 minutes. Consumption: 1 litre every 10 to 30 m² depending on the absorption of the wood. Packaging: 2.5 l tanks.
Ultracoat Soft Touch Base
One-component, rapid drying, water-based primer for preparing wooden floors before applying ULTRACOAT SOFT TOUCH FINISH. Product with low emission of volatile organic compounds (VOC).
Ultracoat Soft Touch Finish
Two-component, water-based, 100% polyurethane varnish with low emission of volatile organic compounds (VOC). Natural, soft finish for protecting wooden floors in residential and commercial environments.
Ultracoat Solvent Base Alcohol-based ultra quick-drying base coat for wooden floors.
ON
AN
SYSTE M
T
Two-component, NMP-free, waterbased undercoat with low emission of volatile organic compounds (VOC) and high insulating capacity, for preparing solid and pre-sanded wooden floors and wooden floors under repair for waterbased finishing cycles.
TRACOA UL
FIR E R E SIST
Ultracoat Premium Base
T PROTEC
TI
TECHNICAL DATA: comp. A comp. B Consistency: liquid liquid. Colour: milky white transparent. Density (g/cm³): 1.030 1.075. Storage: 12 months 12 months. Duration of mix: 2 hours. Mixing ratio: comp. A: comp. B = 5 : 1 (by volume). Maximum permitted dilution ratio (Dir. 2004/42/EEC): 10% with clean water or with ULTRACOAT EL. Sanding: after 12 hours. Varnishing (without sanding): after 2 hours, within 5 hours. Consumption: 80-100 g/m² per coat. Packaging: 6 litre kits (A+B), 2x6 l boxes.
TECHNICAL DATA: Consistency: liquid. Colour: milky. Density (g/cm³): 1.025. Viscosity (Ford cup number 3): 45 sec. Maximum permitted dilution ratio (Dir. 2004/42/EEC): 10% with clean water or ULTRACOAT EL. Buffing: after 2 hours. EMICODE: EC 1 - very low emission. Consumption: 80-100 g/m². Packaging: 5 l cans (2x5 l boxes).
TECHNICAL DATA: Consistency: comp. A: milky liquid; comp. B: liquid. Colour: comp. A: milky; comp. B: colourless. Density (g/cm³): comp. A: 1.025; comp. B: 1.075. Viscosity comp. A+B (tazza Ford 3): 55 sec. Dust dry: 25 min. Touch dry: 40 min. Maximum permitted dilution ratio (Dir. 2004/42/EEC): 10% with clean water or ULTRACOAT EL. Buffing: after 12 hours. Re-varnishing (without buffing): between 2 and 5 hours. Gloss level: < 5. EMICODE: EC 1 R - very low emission. Consumption: 50-70 ml/m² per coat. Packaging: 5.5 l units (2x5.5 l boxes).
TECHNICAL DATA: Appearance: colourless. Dilution: supplied ready to use. Drying time: touch dry approx. 15 minutes at +20°C and 50% RH. Cleaning: white spirit. Consistency: liquid. Sanding: 15-20 minutes. Re-varnishing (without sanding): 15/20 minutes. Storage: 24 months. Yield: 10 m² per litre. Packaging: 10 litre tanks.
85
8. ADHESIVES AND FINISHING PRODUCTS FOR WOODEN FLOORS
Ultracoat Sport Color
One-component water-based coloured acrylic paint for marking out playing areas on wooden sports surfaces.
Ultracoat Sport Color Hardener NEW Admixture for ULTRACOAT SPORT COLOR.
Ultracoat Toning Base
Two-component, water-based toning undercoat with high insulating properties with low emission of volatile organic compounds (VOC), no NMP for preparing solid and pre-sanded wooden floors and wooden floors under repair prior to applying ULTRACOAT water-based finishing cycles.
Ultracoat Top Deck Cleaner
Ready-to-use alkaline solution used for maintenance work on external wooden flooring treated with ULTRACOAT TOP DECK OIL.
86
TECHNICAL DATA: Consistency: liquid. Colour: various colours. Density: 1.05/1.1 depending on the colour. Cps viscosity: 600-1000 depending on the colour. Sanding: after 2 hours. Maximum permitted dilution ratio (Dir. 2004/42/CEE): 10% with clean water.
TECHNICAL DATA: Consistency: liquid. Colour: transparent. Density: 1.120 ± 0.005 kg/litre. Packaging: box containing 6 1 l bottles.
TECHNICAL DATA: comp. A comp. B Consistency: liquid liquid Colours: milky white transparent Density (g/cm³): 1.030 1.075 Storage: 12 months 12 months Pot life of mix: 2 hours. Mixing ratio: comp. A : comp. B = 5 : 1 (by volume). Maximum permitted dilution ratio (Dir. 2004/42/EEC): 10% with clean water or ULTRACOAT EL. Buffing: after 16/24 hours. Varnishing without sanding: after 2 hours and within 5 hours. Consumption: 80-100 g/m² per coat. Packaging: 6 l units (A+B).
TECHNICAL DATA: pH: 13. Dilution ratio: 3/10 dl in 10 litres of lukewarm water. Drying time: 24 hours. Cleaning of tools: soap and lukewarm water. Storage: 12 months. Consumption: depending on the type of floor. Packaging: 4 litres.
Ultracoat Top Deck Oil
Oil finishing product for treating external wooden floors.
Ultracoat Universal Base
One-component, NMP-free, water-based rapid undercoat, with low emission of volatile organic compounds (VOC) for wooden floors.
TECHNICAL DATA: Application: roller or brush. Dust dry: 6 hours. Touch dry: 24 hours. Buffing: do not buff. Colours: teak and neutral. Storage: 12 months. Consumption: 1 litre for 12-15 m². Packaging: 5 litres.
TECHNICAL DATA: Consistency: liquid. Colour: transparent. Storage: 12 months. Maximum permitted dilution ratio (Dir. 2004/42/EEC): 10% with clean water or ULTRACOAT EL. Sanding: after 2 hours. Varnishing (without sanding) (for three-coat cycles): after 2 hours, within 5 hours. Consumption: 80-100 g/m² per coat. Packaging: 5 litre units.
87
ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS
9. ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS 9.1 Adhesives in water dispersion__________________________________________________________________
Adesilex MT32
Adhesive in water dispersion for laying all types of wall coverings, wallpaper, glass-fibre fabrics and non-woven fabrics.
Adesilex V4
Multi-purpose adhesive for bonding vinyl and textile floorings.
Adesilex VS45
High and fast initial tack adhesive for laying resilient wall coverings.
Aquacol T
Hard-set adhesive with long open time for textile and linoleum floorings.
90
TECHNICAL DATA: Consistency: creamy paste. Colour: white Waiting time: 0-10 minutes. Open time: 30 minutes. Storage: 12 months. Protect from frost. EMICODE: EC1 Plus - very low emission. Application: N°1 MAPEI trowels or TKB A1 or roller. Consumption: 150-250 kg/m². Packaging: 20, 10, 5 and 1 kg drums.
TECHNICAL DATA: Consistency: creamy paste. Colour: white Waiting time: 10-20 minutes. Open time: 20-30 minutes. Set to light foot traffic: 3-5 hours. Ready for use: 24-48 hours. Storage: 12 months. Protect from frost. Application: N° 1, 2, 3 MAPEI trowels, TKB A1, A2, B1, B2. Consumption: 300-500 g/m². Packaging: 16 and 5 kg drums.
TECHNICAL DATA: Consistency: creamy paste. Colour: white. Waiting time: 0-10 minutes. Open time: 10-20 minutes. Storage: 12 months. Protect from frost. Application: N° 1, MAPEI trowels, TKB A1, A2. Consumption: 200-300 g/m². Packaging: 16 and 5 kg drums.
TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 10-20 minutes. Open time: 20-30 minutes. Set to light foot traffic: 3-5 hours. Ready for use: 24-48 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Protect from frost. Application: N° 2, 3 MAPEI trowels, TKB A2, B1, B2. Consumption: 300-450 g/m². Packaging: 25, 16, 5 kg drums.
Mapecryl Eco
TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 0-10 minutes. Open time: 20-30 minutes. Set to light foot traffic: 3-5 hours. Ready for use: approximately 24-48 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Protect from frost. Application: N° 1, 2, 3 MAPEI trowels, TKB A1, A2, B1, B2. Consumption: 250-450 g/m². Packaging: 25, 16, 5 kg drums.
Multi-purpose adhesive for vinyl, textile and linoleum wall and floor coverings.
Rollcoll
TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: applied by trowel: from 10 to 20 minutes; applied by roller: from 0 to 10 minutes. Open time: – applied by trowel: 30-40 minutes; – applied by roller: 20-30 minutes. Set to light foot traffic: 3-5 hours. Ready for use: 24-48 hours. Storage: 12 months. Protect from frost. Application: N° 1, 2, 3 MAPEI trowels, TKB A1, A2, B1, B2, roller or spray. Consumption: – by trowel: 300-500 g/m²; – by roller: 200-300 g/m². Packaging: 16, 5 and 1 kg drums.
Multi-purpose adhesive in water dispersion for laying vinyl and textiles floor and wall coverings.
Ultrabond 333
TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 10-20 minutes. Open time: 30-40 minutes. Set to light foot traffic: 3-5 hours. Ready for use: approximately 24-48 hours. Storage: 12 months. Protect from frost. Application: N° 1, 2, 3 notched trowel, TKB A1, A2, B1, B2. Consumption: 300-500 g/m². Packaging: 16 and 25 kg drums.
Multi-purpose adhesive with long open time for vinyl, textiles and linoleum floor and wall coverings.
L IA
N SIO CLA IS
FOR BUILD SS
G MATER IN
Fibre-reinforced adhesive. Specifically developed for the installation of LVT, SPC and rigid LVT coverings it guarantees the highest performances in terms of adhesion and dimensional stability.
EM
Ultrabond Eco 4 LVT
TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 0-10 minutes. Open time: 20-30 minutes. Set to light foot traffic: 3-5 hours. Ready for use: 24-48 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Protect from frost. Application: N° 1, MAPEI trowels, TKB A1, A2. Consumption: 200-300 g/m². Packaging: 16 and 5 kg drums.
91
9. ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS
Ultrabond Eco 185
TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 10-20 minutes. Open time: 20-30 minutes. Set to light foot traffic: 3-5 hours. Ready for use: 24-48 hours. EMICODE: EC1 - very low emission. Storage: 12 months. Protect from frost. Application: N° 2, 3 notched trowels, TKB A2, B1, B2. Consumption: 300-450 g/m². Packaging: 16 kg drums.
SBR based adhesive with high initial tack and long open time for textile floorings.
Ultrabond Eco 350
TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 10-20 minutes. Open time: 50-60 minutes. Set to light foot traffic: 3-5 hours. Ready for use: 24-48 hours. EMICODE: EC1 - very low emission. Storage: 12 months. Protect from frost. Application: N° 1, MAPEI trowels, TKB A1, A2. Consumption: 200-450 g/m². Packaging: 16 kg drums.
Adhesive with long open time for vinyl floor and wall coverings.
Ultrabond Eco 375
L IA
N SIO CLA IS
FOR BUILD SS
EM
Adhesive with long open time for vinyl floor and wall coverings.
G MATER IN
Ultrabond Eco 380
“Pressure sensitive” adhesive with strong and fast initial tack, very long open time, for vinyl floor and wall coverings.
92
TECHNICAL DATA: Colour: light beige. Waiting time: 10-20 minutes. Open time: 40-50 minutes. Set to light foot traffic: 3-5 hours. Ready for use: 24-48 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: N° 1 MAPEI trowel, TKB A1, A2. Consumption: 200-300 g/m². Packaging: 16 kg drums.
TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 10-20 minutes. Open time: 60-70 minutes. Set to light foot traffic: 3-5 hours. Ready for use: 24-48 hours. Storage: 12 months. Protect from frost. Application: N° 1 MAPEI trowel, TKB A1, A2. Consumption: 200-300 g/m². Packaging: 16 kg drums.
Ultrabond Eco 520
TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 10-20 minutes. Open time: 20-30 minutes. Set to light foot traffic: 3-5 hours. Ready for use: 24-48 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Protect from frost. Application: N° 2, 3 MAPEI trowels, TKB B1, B2. Consumption: 300-450 g/m². Packaging: 16 kg drums.
Adhesive with high initial tack for linoleum floors and resilient wall coverings.
Ultrabond Eco 530
L IA
N SIO CLA IS
FOR BUILD SS
EM
Adhesive with high and fast initial bond. For the wet-bed installation of linoleum and resilient wall coverings.
G MATER IN
Ultrabond Eco 540
SBR based adhesive with strong initial tack and long open time for linoleum floorings.
Ultrabond Eco 575
Synthetic polymer adhesive in water dispersion for installing skirtings.
TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 0-10 minutes. Open time: 15-20 minutes. Set to light foot traffic: 3-5 hours. Ready for use: 24-48 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Protect from frost. Application: N° 2, 3 MAPEI trowels, TKB B1, B2. Consumption: 300-450 g/m². Packaging: 16 kg drums.
TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 10-20 minutes. Open time: 20-30 minutes. Set to light foot traffic: 3-5 hours. Ready for use: 24-48 hours. EMICODE: EC1 - very low emission. Storage: 12 months. Protect from frost. Application: N° 2, 3 MAPEI trowels, TKB B1, B2. Consumption: 300-450 g/m². Packaging: 16 kg drums.
TECHNICAL DATA: Consistency: creamy paste. Colour: beige. Open time: 25 minutes. Final hardening lime: 24 hours. EMICODE: EC1 Plus - very low emission. Storage: 24 months. Protect from frost. Application: by extrusion. Consumption: 325 ml each 12 linear meter. Packaging: 310 ml cartridges.
93
9. ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS
Ultrabond Eco Decor Dry
THECNICAL DATA: Consistency: creamy paste. Colour: white. Waiting time: 0-10 minutes. Open time: 20 minutes. Waiting time before painting: 24 hours. EMICODE: EC1 PLUS - very low emission. Storage : 12 months. Protect from frost. Application: n. 1 MAPEI trowels, TKB A1, roller. Consumption: 150-250 g/m². Packaging: 3 kg drums.
NEW
Ready to use adhesive for decorative fiber glass and wall paper in dry area.
Ultrabond Eco Fast Track
TECHNICAL DATA: Consistency: creamy paste. Colour: beige. Waiting time: 5-10 minutes. Open time: 15-20 minutes. Set to light foot traffic: 1 hour. Ready to use: 12 hours. EMICODE: EC1 - very low emission. Storage: 12 months. Protect from frost. Application: N° 1, 2, 3 MAPEI trowels, TKB A1, A2, B1, B2. Consumption: 200-400 g/m². Packaging: 5 kg drums.
Fast set, universal adhesive quick renovation of resilient floor coverings and for installing, coves and stairs.
Ultrabond Eco Fix
L IA
N SIO CLA IS
FOR BUILD SS
EM
Adhesive and fixative with high residual tack for loose-lay floorings.
G MATER IN
Ultrabond Eco Tack
Anti-slide tackifier with high residual tack for textile loose-lay tiles.
94
TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 30 minutes - 12 hours. Set to light foot traffic: immediately after laying. Ready for use: immediately after laying. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Protect from frost. Application: N° 1 MAPEI trowel TKB A1, A4 or roller. Consumption: 80-150 g/m². Packaging: 10 kg drums.
TECHNICAL DATA: Consistency: liquid. Colour: light beige. Waiting time: 30 minutes (max. 12 hours). Set to light foot traffic: immediately after laying. Ready for use: immediately after laying. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: roller. Consumption: 100-200 g/m². Packaging: 15 kg drums.
Ultrabond Eco Tack 4 LVT
L IA
N SIO CLA IS
FOR BUILD SS
EM
Anti-slide fixative for loose-lay LVT, SPC and rigid LVT.
G MATER IN
Ultrabond Eco Tack TX+
L IA
N SIO CLA IS
FOR BUILD SS
EM
Anti-slide tackifier for loose-lay carpet tiles.
G MATER IN
Ultrabond Eco TX1 NEW
L IA
N SIO CLA IS
FOR BUILD SS
EM
Hard set “STANDARD” adhesive for textile and linoleum flooring.
G MATER IN
Ultrabond Eco TX2 NEW
“PROFESSIONAL” adhesive with high initial tack and long open time, for textile floorings.
TECHNICAL DATA: Consistency: liquid paste. Colour: white. Waiting time: install flooring when the adhesive becomes transparent (after 30 mins-6 hours, depending on surrounding conditions and absorption of the substrate). Set to light foot traffic: immediately after installation. Ready for use: immediately after installation. EMICODE: EC1 - very low emission. Storage: 12 months. Protect from frost. Application: roller. Consumption: 90-130 g/m². Packaging: 15 kg drums.
TECHNICAL DATA: Consistency: liquid. Colour (wet/dry): white/transparent. Waiting time: 15 minutes (max. 12 hours). Set to light foot traffic: immediately after installation. Ready for use: immediately after installation. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: roller. Consumption: 50-100 g/m². Packaging: 5 and 10 kg tanks.
THECNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 0-10 minutes. Open time: 10-20 minutes. Set to light foot traffic: 3-5 hours. Ready to use: 24-48 hours. EMICODE: EC1 PLUS - very low emission. Storage: 12 months. Protect from frost. Application: n. 2, 3 MAPEI trowels, TKB A2,B1,B2. Consumption: 350-500 g/m². Packaging: 16 kg drums.
THECNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 10-20 minutes. Open time: 20-30 minutes. Set to light foot traffic: 3-5 hours. Ready to use: 24-48 hours. EMICODE: EC1 PLUS - very low emission. Storage: 12 months. Protect from frost. Application: n. 2,3 MAPEI trowels, TKB A2,B1,B2. Consumption: 300-450 g/m². Packaging: 16 e 5 kg drums.
95
9. ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS
Ultrabond Eco TX3
L IA
N SIO CLA IS
FOR BUILD SS
EM
“PREMIUM” adhesive with excellent wet grab and early buildup of strength for textile and linoleum floorings.
G MATER IN
Ultrabond Eco V4 Evolution
TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 10-20 minutes (30-40 minutes on low/ non-absorbent substrates). Open time: 60-70 minutes (up to 120 minutes on non-absorbent substrates). Set to light foot traffic: 3-5 hours. Ready for service: 24-48 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Protect from frost. Application: N° 1, 2, 3 MAPEI trowels, TKB A1, A2, B1, B2, roller. Consumption: 200-450 g/m². Packaging: 16, 5 and 1 kg drums.
“All in one” universal adhesive with strong, rapid initial tack and long open time for resilient and textile floor and wall-coverings.
Ultrabond Eco V4SP
L IA
N SIO CLA IS
FOR BUILD SS
EM
Universal, high-performance adhesive for laying resilient and textile flooring and covering.
G MATER IN
Ultrabond Eco V4SP Conductive
Light-coloured adhesive in water dispersion for installing conductive floors with very low emission of volatile organic compounds (VOC).
96
TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 0-10 minutes. Open time: 20-30 minutes. Set to light foot traffic: 3-5 hours. Ready for use: 24-48 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Protect from frost. Application: N° 2, 3 MAPEI trowels, TKB B1, B2. Consumption: 350-500 g/m². Packaging: 16 kg drums.
TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 10-20 minutes (30-40 minutes on low/ non-absorbent substrates). Open time: 30-40 minutes. Set to light foot traffic: 3-5 hours. Ready for use: 24-48 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Protect from frost. Application: N° 1, 2, 3 MAPEI trowels, TKB A1, A2, B1, B2. Consumption: 200-450 g/m². Packaging: 5 and 16 kg drums.
TECHNICAL DATA: Consistency: creamy paste. Colour: light grey. Waiting time: 0-10 minutes. Open time: 15 minutes. Set to light foot traffic: 3-5 hours. Ready for use: 24-48 hours. Electrical resistance: 100,000 ohm. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Protect from frost. Application: notched trowel. Consumption: 200-450 g/m². Packaging: 16 kg drums.
Ultrabond Eco V4SP Fiber
TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 0-10 minutes. Open time: 20-30 minutes. Set to light foot traffic: 3-5 hours. Ready for use: 24-48 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Protect from frost. Application: N° 1, 2, 3 MAPEI trowels, TKB A1, A2, B1, B2. Consumption: 200-450 g/m². Packaging: 16 kg drums.
High-performance, universal, fibrereinforced adhesive for resilient and textile floorings.
Ultrabond Eco VS30
TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 0-10 minutes. Open time: 20-30 minutes. Set to light foot traffic: 3-5 hours. Ready for use: approximately 24-48 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Protect from frost. Application: N° 1, 2 notched trowel, TKB A1, A2, B1, B2. Consumption: 0.30-0.50 kg/m². Packaging: 16 and 25 kg drums.
Multi-purpose adhesive for PVC, linoleum and textile flooring.
L IA
N SIO CLA IS
FOR BUILD SS
High temperature universal adhesive for resilient and textile floorings.
EM
Ultrabond Eco VS90 Plus
G MATER IN
Ultrabond Super Grip
Acrylic, deformable assembly adhesive for internal use, with high initial sucker effect.
TECHNICAL DATA: Consistency: creamy paste. Colour: beige. Waiting time: 0-10 minutes. Open time: 20-30 minutes. Set to light foot traffic: 3-5 hours. Ready to use: 24-48 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Protect from frost. Application: N° 1, 2, 3 MAPEI trowels, TKB A1, A2, B1, B2. Consumption: 200-450 g/m². Packaging: 5 and 16 kg drums.
TECHNICAL DATA: Viscosity: creamy thixotropic paste. Open time: 10-15 minutes. Initial tensile strength: 17 N. Final tensile strength: 32.5 kg/cm². Hardening time: 24-48 hours. Dry solids content: 70%. EMICODE: EC1 Plus - very low emission. Colour: white. Application: extrusion gun. Consumption: 15 metres of bead (5 mm diameter section). Packaging: 310 ml cartridges.
97
9. ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS
Ultrabond TX57
High and fast initial tack adhesive for textile and linoleum floorings.
TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 0-20 minutes. Open time: 20-30 minutes. Set to light foot traffic: 3-5 hours. Ready for use: 24-48 hours. Storage: 12 months. Protect from frost. Application: N° 2, 3 MAPEI trowels, TKB A2, B1, B2. Consumption: 300-550 g/m². Packaging: 16 kg drums.
9.2 Ancillary productss for LVT_____________________________________________________________________
Flexcolor 4 LVT
Ready to use grout for Luxury Vinyl Tiles.
Kerapoxy 4 LVT
Two-component epoxy grout for LVT floorings.
Mapecoat 4 LVT
Two component aliphatic, anti-slip polyurethane finish in water dispersion for LVT.
98
TECHNICAL DATA: Consistency: thick paste. Colours: 112 medium grey, 114 anthracite, 120 black, 130 jasmine, 134 silk, 146 rich brown. Waiting time before finishing operation: 10-15 minutes. Set to light foot traffic: 24 hours. Ready for use: 72 hours. EMICODE: EC1 - very low emission. Application: rubber float. Cleaning and finishing: Scotch-Brite® and MAPEI sponge. Storage: 12 months. Consumption: according to the size of the joints. Packaging: 1 and 5 kg drums.
TECHNICAL DATA: Mixing ratio: 9 : 1. Consistency: comp. A: thick paste; comp. B: gel. Colours: 112 medium grey, 114 anthracite, 120 black, 130 jasmine, 134 silk, 146 rich brown. Pot life: approx. 45 minutes. Set to light foot traffic: 12 h. Ready to use: 3 days. Application: rubber float. Cleaning and finishing: Scotch-Brite® and MAPEI sponge. Storage: 24 months. Consumption: according to the size of the joints and of the LVT. Packaging: 2 kg units.
TECHNICAL DATA: Mixing ratio: 5 : 1. Dust dry: 30 minutes. Touch dry: 50 minutes. Re-varnishing (if required): min. 2 hours - max. 48 hours (after more than 48 hours, the surface will need to be adequately prepared with a red or green ULTRACOAT PAD). Set to light foot traffic: 16 hours. Ready for use (also in contact with shower water): 24 hours. EMICODE: EC1 - very low emission. Gloss level (approximate value): 10-30 gloss. Slip resistance according to DIN 51130 and AS 4586: R11. Barefoot slip resistance according to DIN 51097 and AS 4586: A+B. Slip resistance according to EN 13036-4 and AS 4586 (pendulum method): dry: 90; wet: 55. Slip resistance (Method B.C.R.): leather, dry surface (µ): 0.56; rubber, dry surface (µ): 0.74; rubber, wet surface (µ): 0.81. Consumption: 80-100 g/m². Packaging: 1.2 kg kits (A + B).
Mapesonic GD 4 LVT
Low-thickness, high-density, sound proofing system, for LVT reinforced with glass fibre mesh, designed to block and reduce transmission of foot step noise through floors.
Mapesonic SA 4 LVT
Self-adhesive, low-thickness, high-density, sound proofing system, for LVT reinforced with glass fibre mesh, designed to block and reduce transmission of foot step noise through floors.
Planiprep 4 LVT
Ready-to-use smoothing compound for levelling off existing substrates with joint before laying LVT coatings. Existing interior ceramic and natural stone substrates can be levelled and smooth over (down to a feather edge up to a thickness of 2 mm) filling joints and gaps between the tiles creating a fine a smooth surface suitable for bonding loose-lay LVT tiles and planks using reactive adhesives, such as ULTRABOND ECO MS 4 LVT and ULTRABOND ECO MS 4 LVT WALL in a very short time (after 2 hours).
Planiprep Remove 4 LVT
Ready-to-use grout smoother for looselay LVT easy to remove without leaving any residual. This product is used to level off and smooth over (down to a feather edge in layers up to 2 mm thick) existing internal ceramic and stone surfaces. It fills joints and gaps between tiles and forms a fine, smooth finish suitable for loose-lay LVT tiles and planks.
TECHNICAL DATA: Thickness: 1.5 mm. Size: 10 m x 1 m sheets. Weight: 1.1 kg/m². Dimensional stability (ISO 23999): <0.2%. Reduction of noise from footsteps (ISO 10140-1): 16 dB (for 2.5 mm thick LVT). EMICODE: EC1 Plus - very low emission. Packaging: 10 x 1 m (10 m²) rolls.
TECHNICAL DATA: Thickness: 1.7 mm. Size: 10 m x 1 m sheets. Weight: 1.1 kg/m². Dimensional stability (ISO 23999): <0.2%. Reduction of noise from footsteps (ISO 10140-1): 16 dB (for 2.5 mm thick LVT). EMICODE: EC1 Plus - very low emission. Packaging: 10 x 1 m (10 m²) rolls.
TECHNICAL DATA: Where to use: internal floors and walls for loose-lay LVT. Consistency: thick paste. Colour: white. Thickness applied: 0-2 mm (up to 3-4 mm in gaps and joints). Set to light foot traffic: approx. 1 hour. Waiting time before sanding and applying LVT: approx. 2 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: trowel. Consumption: 80-100 g/m². Packaging: 10 kg drums.
TECHNICAL DATA: Where to use: internal floors, for loose-lay LVT. Consistency: thick paste. Colour: white. Thickness applied: 0-2 mm. Set to light foot traffic: 12-24 hours. Waiting time before sanding and installing looselay or glue-down LVT: 12-24 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: trowel. Consumption: 80-100 g/m². Packaging: 10 kg drums.
99
9. ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS
Spacers 4 LVT
Spacers for calibrating grout lines in LVT, SPC and rigid LVT. For 2 mm, 3 mm and 4 mm grouts.
TECHNICAL DATA: Packaging: 200 pcs sachets.
9.3 Reactive adhesives___________________________________________________________________________
Adesilex G19
Two-component, epoxy-polyurethane adhesive for resilient and textile flooring on internal and external absorbent and non-absorbent substrates. Specifically developed for the installation of rubber athletic tracks.
Adesilex G19 Conductive
Two-component, epoxy-polyurethane adhesive, for bonding resilient conductive flooring on both absorbent and non-absorbent substrates.
Adesilex G19 Fast
Fast setting, two-component epoxypolyurethane adhesive for resilient and textile flooring on internal and external absorbent and non-absorbent substrates. Specifically developed for the installation of rubber athletic tracks.
100
TECHNICAL DATA: Consistency: comp. A: thick paste; comp. B: liquid. Colour: comp. A: beige, red, green and black; comp. B: transparent. Mixing ratio: comp. A: comp. B = 94 : 6. Pot life of mix: 50-60 minutes. Setting time: 9 hours. Set to light foot traffic: 12-24 hours. Ready for use: 3 days. Storage: 24 months. Application: nr. 1, 2, 3, 4 MAPEI trowels, TKB A1, A2, B1, B2, C1. Consumption: 350-1000 g/m². Packaging: 5 and 10 kg drums.
TECHNICAL DATA: Consistency: comp. A: thick paste; comp. B: fluid liquid. Colour: comp. A: black; comp. B: straw yellow. Mixing ratio: comp. A : comp. B = 90 : 10. Pot life of mix: 30 minutes. Open time: 50 minutes. Setting time: 5 hours. Set to light foot traffic: 12-24 hours. Ready for use: 3 days. Electrical resistance: 150,000 ohm. Storage: 24 months. Application: N° 1, 2 MAPEI trowels, TKB A2, B1, B2, B3. Consumption: 300-450 g/m². Packaging: 10 kg drums.
TECHNICAL DATA: Consistency: comp. A: thick paste; comp. B: liquid. Colour: comp. A: beige, red, green and black; comp. B: transparent. Mixing ratio: comp. A: comp. B = 94 : 6. Pot life of mix: 25-30 minutes. Setting time: 4-5 hours. Set to light foot traffic: 6-12 hours. Ready for use: 36 hours. Storage: 24 months. Application: nr. 1, 2, 3, 4 MAPEI trowels, TKB A1, A2, B1, B2, C1. Consumption: 0.35-1.0 kg/m². Packaging: 10 kg kits.
Adesilex G19 FR Fast
Solvent free, two component, fast setting, epoxy-polyurethane adhesive for resilient and textile floorings in transportation equipment industry. Complies with the requirements of EN 45545-2:2013 (“Requirements for fire behaviour of materials and components”) for the Hazard Levels HL1-HL2, requirements set R10. Also meets the requirements of smoke-gas toxicity specified in the Chinese Standards TB/T3237:2010 and TB/T3139:2006. It is suitable for marine equipment in compliance with the Marine Equipment Directive (MED) 96/98/EC and subsequent amendments.
Adesilex G20
Low viscosity, two-component epoxypolyurethane adhesive for resilient and textile flooring on internal and external absorbent and non-absorbent substrates. Particularly suitable for installing thin flooring, also onto waterproofing underlays such as MAPELAY, in order to avoid the ribs of adhesive may show through.
Adesilex G20 Fast
Low viscosity, fast setting, twocomponent epoxy-polyurethane adhesive for resilient and textile flooring on internal and external absorbent and non-absorbent substrates. Particularly suitable for installing thin flooring, also onto waterproofing fiberglass reinforced underlays such as MAPELAY, in order to avoid the ribs of adhesive may show through.
Ultrabond Eco 571 2K Two-component, low-viscosity polyurethane adhesive with no water or solvents for bonding internal and external PVC and rubber flooring.
TECHNICAL DATA: Consistency: comp. A: thick paste; comp. B: liquid. Colour: comp. A: beige; comp. B: transparent. Mixing ratio: comp. A : comp. B = 94 : 6. Pot life of mix: 25-30 minutes. Setting time: 4-5 hours. Set to light foot traffic: 6-12 hours. Ready for use: 36 hours. Storage: 12 months. Application: nr. 1, 2, 3 MAPEI trowels, TKB A1, A2, B1, B2, C1. Consumption: 400-800 g/m². Packaging: 10 kg drums.
TECHNICAL DATA: Consistency: comp. A: thick paste; comp. B: liquid. Color: comp. A: beige; comp. B: transparent. Mixing ratio: comp. A: comp. B = 94 : 6. Pot life of mix: 50-60 minutes. Setting time: 9 hours. Set to light foot traffic: 12-24 hours. Ready for use: 3 days. Storage: 24 months. Application: nr. 1, 2, 3 MAPEI trowels, TKB A1, A2, B1, B2. Consumption: 350-600 g/m². Packaging: 5 and 10 kg kits.
TECHNICAL DATA: Consistency: comp. A: thick paste; comp. B: liquid. Color: comp. A: beige; comp. B: transparent. Mixing ratio: comp. A: comp. B = 94 : 6. Pot life of mix: 25-30 minutes. Setting time: 4.5 hours. Set to light foot traffic: 6-12 hours. Ready for use: 36 hours. Storage: 24 months. Application: nr. 1, 2, 3 MAPEI trowels, TKB A1, A2, B1, B2. Consumption: 350-600 g/m². Packaging: 10 kg kits.
TECHNICAL DATA: Consistency: comp. A: thick paste; comp. B: fluid liquid. Colour: – comp. A: grey; – comp. B: brown. Mixing ratio: comp. A : comp. B = 86 : 14. Pot life of mix: approx. 30 minutes. Open time: 50-60 minutes. Setting time: approx. 4 hours. Set to light foot traffic: after 12-24 hours. Ready for use: after 3 days. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: N° 1, 2 or 3 MAPEI trowels, TKB A1, A2, B1, B2. Consumption: 300-600 g/m². Packaging: 10 kg drums.
101
9. ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS
Ultrabond Eco Decor Wet
TECHNICAL DATA: Consistenza: gel. Colour: transparent. Waiting time: 90 minutes. Ready to use: 24 hours. EMICODE: EC1 PLUS - very low emission. Storage : 12 months. Application: n. 1 MAPEI trowels, TKB A1, A4 roller. Consumption: 200 g/m². Packaging: 3 kg drums.
NEW
One component, silylated polymerbased for decorative fiber glass and wall paper in wet area even on nonabsorbent substrate.
L IA
N SIO CLA IS
FOR BUILD SS
G MATER IN
One-component, silylate polymer based adhesive for LVT, SPC and rigid LVT. Particularly suitable for laying LVT and resilient flooring in wet areas even on non-absorbent substrates.
EM
Ultrabond Eco MS 4 LVT
One-component, fibre-reinforced, silylate polymer-based adhesive for rubber, polyolefine and linoleum floor coverings.
102
L IA
G MATER IN
Ultrabond Eco S1000 1K
N SIO CLA IS
FOR BUILD SS
One-component, silylated polymerbased adhesive for the installation of LVT, SPC and rigid LVT on walls. Also suitable for the installation on floors. Particularly suitable for laying LVT in wet areas even on non-absorbent substrates.
EM
Ultrabond Eco MS 4 LVT Wall
TECHNICAL DATA: Consistency: creamy paste. Colour: ivory. Open time: 20-30 minutes. Set to light foot traffic: 5 hours. Ready for use: 24 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: N° 1 MAPEI trowel, TKB A1, A2. Consumption: 250-350 g/m². Packaging: 15 kg drums.
TECHNICAL DATA: Consistency: creamy paste. Colour: ivory. Open time: 20-30 minutes. Ready for use: 24 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: N° 1 MAPEI trowel, TKB A1, A2. Consumption: 250-350 g/m². Packaging: 7 kg drums.
TECHNICAL DATA: Consistency: creamy paste. Colour: white. Open time: 20-30 minutes. Set to light foot traffic: 5 hours. Ready for use: 24-48 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: N° 1, 2 MAPEI trowels, TKB A1, A2, B1. Consumption: 250-450 g/m². Packaging: 15 kg drums.
9.4 Polychloroprenic and elastomeric contact adhesives____________________________________________________
Adesilex LP
Polychloroprenic contact adhesive in solvent for laying profiles, covings and resilient floors and coverings where immediate setting is required.
Adesilex VZ
Double coat, polychloroprenic contact adhesive in solvent for laying profiles, covings and resilient floors and coverings where immediate setting is required.
Ultrabond Eco Contact Solvent-free contact adhesive for resilient and textile floor and wall coverings. Suitable for bonding covings, fillets, steps and corner pieces.
TECHNICAL DATA: Consistency: thick liquid. Colour: beige. Waiting time: 10-20 minutes. Open time: 5 hours. Set to light foot traffic: immediate. Ready for use: immediate. Storage: 24 months. Application: N° 1 MAPEI trowels, TKB A2, A3. Consumption: 200-300 g/m². Packaging: 1, 5 and 10 kg drums.
TECHNICAL DATA: Consistency: thick liquid. Colour: beige. Waiting time: 10-20 minutes. Open time: 50 minutes. Set to light foot traffic: immediate. Ready for use: immediate. Storage: 24 months. Application: N° 1 notched trowel, TKB A2, A3. Consumption: 200-300 g/m². Packaging: 1, 5 and 10 kg drums.
TECHNICAL DATA: Consistency: creamy paste. Colour: white. Waiting time: from 30 minutes to 2 hours depending on the type of application, temperature, environmental moisture and substrate absorption. Installation is possible even 18 hours after the spreading of the adhesive. Set to light foot traffic: immediate. EMICODE: EC1 Plus - very low emission. Storage: 12 months in its original sealed packaging. Avoid prolonged exposure to frost. Consumption: 150-200 g/m² per coat on every kind of surface. Packaging: 10 and 5 kg drums.
9.5 Powder adhesives____________________________________________________________________________
Glicovil Special
Special powder adhesive for heavy vinyl wall coverings with a paper or nonwoven fabric backing.
TECHNICAL DATA: Consistency: powder. Colour: white. Dilution ratio: 250 g of powder with 5-10 litres of water (according to use). Storage: 24 months. Application: trowel, brush or roller. Consumption: 80-100 g/m². Packaging: 250 g boxes.
103
9. ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS 9.6 Cementitious adhesives________________________________________________________________________
Granirapid
EN 12004
IN CO MP LI
RDS NDA TA
MI CT ILES
ITH EUROPEA N CE W AN EN 12004 S
IT NT CEME
Two-component, high-performance, deformable, quick-setting and drying cementitious adhesive for rubber slabs bonded to cement
C2F S1 IO A US CER ADHE SIVE FOR
TECHNICAL DATA: Consistency: comp. A: powder; comp. B: thick liquid. Mixing ratio: comp. A: 25 kg + comp. B: 5.5 kg. Pot life of mix: 45 minutes. Application temperature range: from +5°C to +30°C. Open time: 20 minutes. Setting time: 2 hours. Set to light foot traffic: 3-4 hours. Ready for use: 24 hours. Colours available: grey and white. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: N° 10 MAPEI notched trowel. Consumption: 8 kg/m². Packaging: GRANIRAPID white: 28 kg kit component A: 22.5 kg bag component B: 5.5 kg drum GRANIRAPID grey: 30.5 kg kit component A: 25 kg bag component B: 5.5 kg drum.
9.7 Adhesive strips_______________________________________________________________________________
Mapecontact
Reinforced adhesive tape for laying profiles, base-boards, covings and resilient and textile coverings on steps.
TECHNICAL DATA: Colour: adhesive: transparent; reinforcement: orange. Quantity of adhesive per m²: 0.38 kg/m². Application temperature range: from +15°C to +35°C. Waiting time: none, bonds immediately. Set to light foot traffic: immediate. Ready for use: immediate. Storage: 12 months. Height of roll: 35, 65, 85 and 240 mm. Length of roll: 50 m. Packaging: – 35 mm: boxes containing 8x50 m long rolls; – 65 mm: boxes containing 4x50 m long rolls; – 85 mm: boxes containing 3x50 m long rolls; – 240 mm: boxes containing 1x50 m long roll.
9.8 Adhesives for synthetic grass___________________________________________________________________
Ultrabond Turf 2 Stars
2-component, rapid-setting polyurethane adhesive with very low emission of volatile organic compounds (VOC) for bonding synthetic grass.
Ultrabond Turf 2 Stars Pro
Two-component polyurethane adhesive with very low emission of VOC, for installing highly flexible synthetic grass sports surfaces.
104
TECHNICAL DATA: Consistency: comp. A: thick paste; comp. B: fluid liquid. Colour: comp. A: green/red/white; comp. B: brown. Inflammable: no. Mixing ratio: comp. A : comp. B = 90 : 10. Pot life of mix: 30 minutes. Application temperature range: from 15°C to +35°C. Open time: 40-45 minutes. EMICODE: EC1 Plus - very low emission. Set to light foot traffic: after 12-24 hours. Storage: 12 months. Application: N° 3 or 4 notched trowel. Consumption: 0.4-0.5 kg per metre of 40 mm wide jointing strip (10 kg of adhesive for 20-25 metres). Packaging: 5 and 15 kg drums (green). Red and white are available in 15 kg drums upon request.
TECHNICAL DATA: Consistency: creamy paste. Colour: green. Mixing ratio: comp. A : comp. B = 90 : 10. Pot life of mix: approx. 40 minutes. Application temperature range: from +15°C to +35°C. Open time: approx. 45 minutes. EMICODE: EC1 Plus - very low emission. Set to light foot traffic: 12 hours. Storage: 12 months. Application: n° 3 or 4 notched trowel. Consumption: 0.4-0.5 kg per metre of 40 cm wide jointing strip (10 kg of adhesive for 20-25 metres). Packaging: 15 and 5 kg drums (green).
Ultrabond Turf 2 Stars W
2-component, rapid-setting polyurethane adhesive with very low emission level of volatile organic compounds (VOC) for bonding synthetic grass even with low temperature.
Ultrabond Turf LS
One-component, ready-to-use silylated polymer-based adhesive for bonding decorative synthetic grass.
Ultrabond Turf PU 1K One-component, ready-to-use, polyurethane adhesive for bonding jointing strips between sheets of synthetic grass.
Ultrabond Turf PU 1K LC
One-component, ready-to-use polyurethane adhesive for bonding jointing strips between rolls of synthetic grass.
TECHNICAL DATA: Consistency: comp. A: thick paste; comp. B: fluid liquid. Colour: comp. A: green/red/white; comp. B: brown. Inflammable: no. Mixing ratio: comp. A : comp. B = 90 : 10. Pot life of mix: 30 minutes. Application temperature range: from +0°C to +25°C. Open time: 30-35 minutes. Set to light foot traffic: after 12-24 hours. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: N° 3 or 4 notched trowel. Consumption: 0.4-0.5 kg per metre of 40 mm wide jointing strip (10 kg of adhesive for 20-25 metres). Packaging: 15 kg drums (green, red and white).
TECHNICAL DATA: Consistency: thixotropic paste. Colour: green. Application temperature: from +0°C to +35°C. Open time: 25 minutes. Set to foot traffic: 12 hours. Storage: 12 months. Application: sealant extrusion gun. Consumption: depending on application technique. Packaging: box of 12 300 ml cartridges.
TECHNICAL DATA: Consistency: creamy paste. Colour: green. Inflammable: no. Application temperature: from +0°C to +35°C. Open time: 80-100 minutes. Set to light foot traffic: 12 hours. Storage: 12 months. Application: N° 3 or 4 notched trowel. Consumption: 0.30-0.35 kg per linear metre of 40 cm wide jointing strip (10 kg of adhesive for 22-25 linear metres of jointing strip). Packaging: 7 and 15 kg drums and box of 12 600 ml aluminium soft-cartridges.
TECHNICAL DATA: Consistency: creamy paste. Colour: green. Application temperature: from +0°C to +35°C. Open time: 60 minutes. Set to light foot traffic: 12 hours. Storage: 12 months. Application: N° 3 or 4 notched trowel. Consumption: 0.30-0.35 kg per metre of 40 cm wide jointing strip (10 kg of adhesive for 22-25 metres). Packaging: 15 and 7 kg drums.
105
9. ADHESIVES FOR RESILIENT AND TEXTILE COVERINGS
Ultrabond Turf PU 2K
Two-component polyurethane adhesive for bonding jointing strips between sheets of synthetic grass with very low emission level of volatile organic compounds (VOC).
Ultrabond Turf Repair
One component polyurethane adhesive with modified viscosity for repairing artificial turf surfaces.
Ultrabond Turf Tape 100
Jointing strip for fixing synthetic grass sheets in place and marking out lines for various sporting disciplines, even the strictest ones (i.e. Rugby).
Ultrabond Turf Tape 300
Jointing strip for fixing synthetic grass sheets in place and marking out lines for various sporting disciplines.
106
TECHNICAL DATA: Consistency: comp. A: thick paste; comp. B: fluid liquid. Colour: green, red and white. Mixing ratio: comp. A : comp. B = 90 : 10. Pot life of mix: 60 minutes. Application temperature: from +0°C to +35°C. Open time: 70-80 minutes. EMICODE: EC1 Plus - very low emission. Set to light foot traffic: 12-24 hours. Storage: 12 months. Application: N° 3 or 4 notched trowel. Consumption: 0.4-0.5 kg per metre of 40 cm wide jointing strip (10 kg of adhesive for 20-25 metres of jointing strip). Packaging: 15 kg drums (green, red and white).
TECHNICAL DATA: Consistency: creamy paste. Colour: green. Inflammable: no. Application temperature range: from +0°C to +35°C. Set to light foot traffic: 12 hours. Storage: 12 months. Application: n° 3 or 4 notched trowel. Consumption: depending on the stip used for the repairing work. Packaging: box of 12 300 ml cartridges.
TECHNICAL DATA: Thickness: 0.100 mm. Height of roll: 400 mm. Length of roll: 300 metres.
TECHNICAL DATA: Thickness: 0.5 mm. Height of roll: 300 mm. Length of roll: 300 metres.
Ultrabond Turf Tape Pro
Jointing strip for fixing synthetic grass sheets in place and making out lines for various sporting disciplines. When used in combination with adhesives from the ULTRABOND TURF range, it complies with the new FIFA requirements.
TECHNICAL DATA: Thickness: 0.36 mm. Height of roll: 300 mm. Length of roll: 300 metres.
107
COMPLEMENTARY PRODUCTS FOR LAYING CERAMIC TILES, STONE MATERIAL, PARQUET, RESILIENT AND TEXTILE COVERINGS
10. COMPLEMENTARY PRODUCTS FOR LAYING CERAMIC TILES, STONE MATERIAL, PARQUET, RESILIENT AND TEXTILE COVERINGS 10.1 Complementary products for laying ceramic tiles and stone material _________________________________
Fuga Fresca
Acrylic resin paint in water dispersion to bring back the colour of tile joints in ceramic tiles.
Keranet
Acid-based cleaning solution for ceramic tiles. Particularly recommended for eliminating lime efflorescence and for the final cleaning step of Tuscany terracotta. In powder (concentrated) or liquid (15% in solution).
Kerapoxy Cleaner
Special cleaning solution for epoxy grout, suitable for cleaning operations after completing laying work and for removing traces and stains of epoxy grout (such as KERAPOXY, KERAPOXY P, KERAPOXY DESIGN and KERAPOXY CQ) from the surface of ceramic and glass coverings. Also suitable for removing residual or shadows of KERAPOXY 4 LVT and FLEXCOLOR 4 LVT from the surface of LVT floors and coverings.
Mapeguard UM 35
NEW
Waterproofing, uncoupling and anti-fracture membrane for cracked and damp substrates and substrates that are not fully cured before installing ceramic and stone tiles for internal and external surfaces without having to copy the layout of distribution joints in the substrate.
110
TECHNICAL DATA: Colour: available in 34 different colours. Application: by brush or bottle. Consumption: according to the size of the joint. Packaging: 1 kg tins and 160 g bottles.
TECHNICAL DATA: pH of liquid: 1.13. Waiting time before rinsing: 5 minutes, according to the consistency of the dirt; keep applying until stains have been completely removed. Rinse well after cleaning. Storage: 24 months. Consumption: according to requirements. Packaging: – concentrated powder: 18x1 kg packages; – liquid ready for use: 5, 10 and 25 kg canisters and 12x1 kg packages; – 0.75 kg spray bottles.
TECHNICAL DATA: pH of liquid: 12 Waiting time before rinsing: several minutes. In the case of larger residues, leave the solution to react for longer or repeat the cleaning operation. Storage: 24 months. Application: by spray. Consumption: according to requirements. Packaging: – 0.75 kg spray bottles; – 5 kg tanks.
TECHNICAL DATA: Length: 30 m. Width: 1 m. Application: see technical Data Sheet. Packaging: 30 m rolls.
Mapetex System
Removable anti-fracture system for laying ceramic and stone flooring.
Mapetherm Tile Fix 15
Expansion plugs with 7 mm diameter zinc-plated steel screws for fastening up to 160 mm thick panels, supplied with a 10 mm diameter nylon plug and heatstop washer.
TECHNICAL DATA: – MAPETEX: width: 100 cm and 200 cm. – MAPETEX STRIP: width: 50 mm and 410 mm. Application: see Technical Data Sheet. Packaging: MAPETEX: 2 m x 50 m rolls; 1 m x 50 m rolls. MAPETEX STRIP: 50 mm x 25 m rolls; 410 mm by 10 m rolls; 410 mm x 5 m rolls.
TECHNICAL DATA: Length of plug: 230 mm. Diameter of screw: 7 mm. Diameter of plug: 10 mm. Diameter of hole: 10 mm. Minimum depth of hole in reinforced cement and masonry: from 45 mm to 100 mm. Maximum thickness to be fastened: 160 mm. Packaging: boxes of 100 plugs.
Mapetiles Removable System
Removable soundproofing and isolating system for installing ceramic flooring.
10.2 Complementary products for laying resilient and textile coverings ___________________________________
Mapecoat Decor Protection NEW
Two component aliphatic, protective polyurethane finish in water dispersion for decorative fibre glass and vinyl wallpaper in wet area.
TECHNICAL DATA: Mixing ratio: 5:1. Re-varnishing (if required): min 2 hours. Ready to use (also in contact with shower water): 24 hours. EMICODE: EC1 - very low emission. Storage: 12 months. Application: shortpile roller (T3 or T5 type). Consumption: 80-100 g/m². Packaging: 1.2 kg kit (A+B).
111
10. COMPLEMENTARY PRODUCTS FOR LAYING CERAMIC TILES, STONE MATERIAL, PARQUET, RESILIENT AND TEXTILE COVERINGS
Mapecoat Wet & Dry R11
Two component aliphatic, anti-slip polyurethane finish in water dispersion for resilient floor-coverings.
Mapelay
PVC waterproofing and uncoupling sheet reinforced with glass fibres, for laying internal resilient and fabric floors on cracked, particularly dirty or damp substrates or subject to capillary rising damp.
Mapelectric CP1
Solvent-free conductive admixture added to primers, smoothing compounds, adhesives and grouting mortars for laying ceramic floors.
Primer G Conductive
Dark-coloured, solvent-free conductive synthetic resin primer in water dispersion.
112
TECHNICAL DATA: Mixing ratio: 5/1. Dust dry: 30 minutes. Touch dry: 50 minutes. Re-varnishing (if required): min. 2 hours - max. 48 hours (after more than 48 hours, the surface will need to be adequately prepared with a red or green ULTRACOAT PAD). Set to light foot traffic: 16 hours. Ready for use (also in contact with shower water): 16 hours. EMICODE: EC1 - very low emission. Gloss level (approximate value): 10-30 gloss. Slip resistance according to DIN 51130: R11. Slip resistance according to EN 13036-4 (pendulum method): – dry: 90; – wet: 55. Slip resistance (Method B.C.R.): – leather, dry surface (µ): 0.56; – rubber, dry surface (µ): 0.74; – rubber, wet surface (µ): 0.81.
TECHNICAL DATA: Length: 25 m. Width: 2 m. Thickness: 1.2 mm. Weight: 1.1 kg/m². Packaging: 25 m rolls. Weight of roll approx. 57 kg.
TECHNICAL DATA: Consistency: fluid paste. Colour: black. Density: 1.05 kg/dm³. pH: no. Flammable: no. Consumption: see Technical Data Sheet. Packaging: 2.5 kg drums.
TECHNICAL DATA: Consistency: liquid. Colour: black. Application temperature range: from +5°C to +40°C. Drying time: minimum 2 hours. Electrical resistance: 50,000 ohm. Storage: 24 months. Protect from frost. Application: brush. Consumption: 0.1-0.15 kg/m². Packaging: 10 kg drums.
Pulicol 2000
Solvent gel for removing adhesive and paint.
TECHNICAL DATA: Consistency: gel. Colour: transparent. Flammable: yes. Application temperature range: from +10°C to +35°C. Removal time: – adhesives in water dispersion or in solution: 5 minutes; – reactive adhesives: 60 minutes. Storage: 24 months. Application: trowel. Consumption: 0.3 kg/m². Packaging: 2.5 kg drums.
10.3 Accessories, abrasive disks and products for the maintenance of parquet_____________________________
Cleaner H
Damp wipes for cleaning hands.
Cleaner L
Cleaning solution for pre-finished parquet.
Mapei Spray Mop
Compact and light with an innovative design, specifically developed for cleaning domestic areas quickly and efficiently. May be used for daily cleaning operations on wooden floors using specific detergent, as well as for extra maintenance work to remove old wax and apply new wax.
TECHNICAL DATA: Packaging: plastic bottles with 80 damp wipes (20x30 cm).
TECHNICAL DATA: Consistency: liquid. Colour: transparent. Inflammable: yes. Application temperature range: from +5°C to +35°C. Drying time: 24 hours. Storage: 12 months. Application: cotton rag. Consumption: 5-20 g/m². Packaging: 1 litre bottles (0.85 kg) in boxes of 12 bottles.
TECHNICAL DATA: Packaging: 6 pieces.
113
10. COMPLEMENTARY PRODUCTS FOR LAYING CERAMIC TILES, STONE MATERIAL, PARQUET, RESILIENT AND TEXTILE COVERINGS
Ultrabond P-R9
One-component, moisture curing, expansive polyurethane adhesive used by injection, for fastening and repairing parquet elements which are not perfectly bonded to the substrate.
TECHNICAL DATA: Consistency: liquid. Colour: brown. Inflammable: no. Application temperature range: from +10°C to +35°C. Sanding: 24 hours. Set to light foot traffic: 24 hours. Storage: 6 months. Application: by extrusion from the nozzle on the canister. Consumption: 1-2 ml for each hole to be injected. Packaging: 0.5 kg canisters.
Ultracoat Cleaner
Hygienising detergent for wooden floors. Used neat it removes the most stubborn dirt. When diluted with water, it is the ideal detergent for daily cleaning operations in rooms where maximum hygiene is required. Gets rid of dirt from parquet without removing the finishing treatments. Leaves floors clean and hygienised with a pleasant fragrance.
Ultracoat Oil Pad
Special fabric pad for applying ULTRACOAT HARD OIL FAST, ULTRACOAT OIL PLUS and ULTRACOAT OIL COLOR. Specific for removing the products.
Ultracoat Pad
Pads used for polishing and cleaning parquet floors.
114
TECHNICAL DATA: Packaging: boxes of 6 pads.
Ultracoat Pad Special Stripper
TECHNICAL DATA: Packaging: boxes of 10 pads.
Pads used for polishing and sanding of Ultracoat base coats and paints.
Ultracoat Polish A-S
Natural anti-slip protection for wooden floors. Ready-to-use natural wax made from Carnauba extract and water developed specifically for the maintenance of wooden floors using natural products. Also makes surfaces non-slip.
Ultracoat Polish H-T
Protective wear and stain-resistant polish for wooden floors. Ready-to-use product for all types of varnished wooden floor. Provides effective protection against the penetration of stains and reduces absorption of oil, grease, coffee, wine and paint. Also protects against wear from footsteps and abrasion and prevents surface scratches. Brightens up varnished floors to restore them to their original condition and makes the surface of floors less slippery.
Ultracoat Remover Plus
Detergent to remove old wax and stubborn dirt; brings out the natural veining of wood. Reacts with old wax by breaking it down to make removal easier.
115
10. COMPLEMENTARY PRODUCTS FOR LAYING CERAMIC TILES, STONE MATERIAL, PARQUET, RESILIENT AND TEXTILE COVERINGS
Ultracoat Roller Base Sport
Roller for premium base application of the first coat of ULTRACOAT HT SPORT on playing surfaces.
Ultracoat Roller Finish Sport
Roller for applying ULTRACOAT HT SPORT and ULTRACOAT SPORT COLOR.
Ultracoat Roller MT8
Handle for ULTRACOAT ROLLER T3, ULTRACOAT ROLLER T5 and ULTRACOAT ROLLER T10 rollers.
Ultracoat Roller MT Sport
Handle for ULTRACOAT ROLLER BASE SPORT and ULTRACOAT ROLLER FINISH SPORT
116
Ultracoat Roller T3
Roller for applying ULTRACOAT HARD OIL FAST, ULTRACOAT OIL PLUS, ULTRACOAT OIL WAX and ULTRACOAT OIL COLOR.
Ultracoat Roller T5
5 mm fabric roller for applying the second coat of all ULTRACOAT finishing cycles on low porosity wood; after checking its suitability it may also be used for applying the first coat directly on wood.
Ultracoat Roller T10
Roller for applying all base coats and undercoats from the ULTRACOAT line or the first coat of all finishes from the ULTRACOAT line; particularly recommended for absorbent wood and for treating old floors.
Ultracoat SR
Abrasive mesh disks in silica carbide for sanding parquet floors.
117
10. COMPLEMENTARY PRODUCTS FOR LAYING CERAMIC TILES, STONE MATERIAL, PARQUET, RESILIENT AND TEXTILE COVERINGS
Ultracoat Steel Spatula Special spatula recommended for spreading ULTRACOAT AQUA PLUS and ULTRACOAT OIL WAX. Made entirely from stainless steel, when used to apply ULTRACOAT AQUA PLUS it avoids staining the pavement due to discolouring of the high quantity of tannin in certain types of wood. Adjustable flexibility to make grouting operations easier and to guarantee correct filling of even larger joints. Its special shape with rounded corners helps to avoid the formation of streaks of material on the surface of the floor, which makes it particularly recommended for spreading on ULTRACOAT OIL WAX and ULTRACOAT PREMIUM BASE.
118
119
PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS
11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS 11.1 Resin based products________________________________________________________________________
Mapecoat DW 25
Two-component epoxy paint for antiacid and non-toxic coatings on concrete surfaces, suitable for contact with drinking water.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
PRINCIPLES
PI-MC-PR-RC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Mapecoat I 24
Two-component epoxy paint for anti-acid coatings on concrete surfaces.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
PRINCIPLES
PI-MC-PR-RC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Mapecoat I 62 W
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
PRINCIPLES
PI-MC-PR-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
L IA
N SIO CLA IS
FOR BUILD SS
EM
Two-component epoxy coating in water dispersion with a gloss finish to form smooth films of resin coating. Specifically developed for coating the surface of walls and ceilings in clean rooms.
G MATER IN
MAPECOAT I 62 W
MAPECOAT I 62 W
Outgassing VOC (23°C/90°C): ISO-ACCm Class -7.1 / tested
Mapecoat I 600 W
Two-component transparent epoxy primer in water dispersion.
122
TECHNICAL DATA: Consistency: component A thick paste, component B fluid paste. Colour: component A white, component B transparent. Density (EN ISO 2811-1) (g/cm³): component A 1.43, component B 1.003. Dilution rate: supplied ready to use. Waiting time between each coat: 6-24 hours. Complete hardening time: 7 days. Application temperature range: from +5°C to +30°C. Cleaning: ethanol. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.4-0.6 kg/m² per coat. Packaging: 5 kg kits (A + B).
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Colour of mix: white, grey (Ral 7001) and neutral and in RAL colours. Application temperature range: from +5°C to +30°C. Workability time: 30-40 minutes. Setting time of film: 4-5 hours. Waiting time between first and second coat: 6-24 hours. Final hardening time: 3 days. Storage: 24 months in its original sealed packaging. Application: brush, roller or airless spray. Consumption: 400-600 g/m² per coat. Packaging: – 5 kg kits (A+B); – 15 kg kits (A+B).
TECHNICAL DATA: Consistency of mix: thick liquid. Colour: RAL colours. Please contact head office for the complete range. Application: two coats of the product with a short-pile roller or by airless spray. Consumption: coating film, approx. 0.20-0.25 kg/m² per coat. Concentration of airborne particles (ISO 14644-1): ISO Class 5. VOC emissions (ISO 14644-8): ISO-ACCm Class -7.1. Storage: 24 months in its original packaging in a dry place at a temperature of at least +10°C. Packaging: 11 kg kits (A+B); (comp. A = 2.5 kg; comp. B = 8.5 kg)
MAPECOAT I 62 W
Biol. Resistance: excellent
TECHNICAL DATA: Consistency of mix: fluid. Colour of mix: opaline. Mixing ratio: comp. A : comp. B = 2.3 : 3.6. Workability time: 2-3 hours. Dust dry at +23°C and 50% R.H.: 3-4 hours (first coat); 6-8 hours (second coat). Final hardening time: 7 days. Application temperature range: from +8°C to +35°C. Storage: 24 months in its original sealed packaging. Application: roller, spray or airless spray. Consumption: 0.150-0.250 kg/m², depending on the absorbency of the substrate. Packaging: 5.9 and 11.8 kg kits (A + B).
Mapecoat I 600 W Lucido
TECHNICAL DATA: Consistency of mix: fluid. Colour of mix: opaline. Mixing ratio: comp. A: comp. B = 2.3 : 3.6. Workability time: 2-3 h. Dust dry at +23°C - 50% R.H.: – 3-4 h (first coat); – 6-8 h (second coat). Final hardening time: 7 days. Application temperature range: from +8°C to +35°C. Storage: 24 months in its original sealed packaging. Application: roller, spray or airless spray. Consumption: 300-500 g/m², depending on the absorbency rate of diluted product. Packaging: 5.9 kg kits (A + B).
Two-component, shiny, transparent epoxy primer in water dispersion.
Mapecoat I 620 W
Two-component, shiny epoxy finish in water dispersion for anti-dust and anti-grease treatments on concrete floors, cementitious substrates and as a finishing coat on epoxy systems.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
PRINCIPLES
MC-PR-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Mapecoat I 650 WT
Two-component, water-dispersed, matt epoxy finish for treating the surface of cementititous substrates.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
PRINCIPLES
PI-MC-PR-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Mapecoat Universal
Two-component, transparent epoxy binder for internal decorative coatings from the MAPEFLOOR COMPACT SYSTEM range.
EN 13813
SR
SYNTHETIC RESINS
B2.0 AR0.5-EFL
TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 50:100. Colour of mix: opaline. Consistency of mix: fluid. Application temperature range: from +12°C to +30°C. Workability time: 40 minutes. Dusty dry: 3 hours. Setting time: 8-9 hours. Set to light foot traffic: 24 hours. Final hardening time: 7 days. Storage: 12 months in its original sealed packaging. Application: short-haired or medium-haired roller or airless spray system. Consumption: 0.100-0.250 kg/m² per coat according to the absorption of the substrate. Packaging: 15 kg kits (A + B).
TECHNICAL DATA: Mixing ratio: comp A : comp B = 20 : 80. Consistency of mix: fluid. Workability time: 40 min. Dust dry: 3-4 h. Touch dry: 4-5 h. Waiting time between first and second coat: 6-24 h according to temperature and level of humidity. Complete hardening time: 7 days. Storage: 12 months in its original packaging in a dry area away from sources of heat at a temperature of between +5°C and +30°C. Consumption: approximately 0.25 kg/m² per coat. Consumption depends on the characteristics of the substrate on which the product is applied and the application method used, and may increase if the surface on which it is applied is uneven. Packaging: 15 kg kits (A + B).
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 2 : 1. Colour of mix: transparent straw yellow. Consistency of mix: thick fluid. Density of mix (kg/m³): ca. 1,079. Pot life of mix at +23°C and 50% R.H.: approx. 30 minutes. Application temperature: min. +10°C - max. +30°C. Hardening time at +23°C and 50% R.H.: set to foot traffic: 12 h; complete hardening time: 7 days. Shore D hardness after (7 days at +23°C) (ISO 868:2003): approx. 75. Flexural strength after (7 days at +23°C) (EN 196-1) (N/mm²): ≥ 30. Compressive strength after (7 days at +23°C) (EN 196-1) (N/mm²): ≥ 55. Storage: 24 months in its original sealed packaging, in a dry place, stored at a temperature between +5°C and +30°C. Application: for priming: roller or smooth steel trowel; for MAPEFLOOR COMPACT SYSTEM MF: smooth trowel or smooth rake; for MAPEFLOOR COMPACT SYSTEM HD: screed-box or straight edge with shims. Consumption: for priming: 0.200-0.400 kg/m²; for MAPEFLOOR COMPACT SYSTEM - 3 mm thickness: 1.4-1.6 kg/m²; for MAPEFLOOR COMPACT SYSTEM HD - 7 mm thickness: 2.0-2.5 kg/m². Packaging: 15 kg kit (A+B).
123
11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS
Mapecolor CPU
TECHNICAL DATA: Colour: grey, beige, ochre yellow, red and green. Bulk density: 1.4 ± 0.05 g/cm³. Storage: 24 months in its original sealed packaging. Application: mix with polyurethane/cement-based formulates. Consumption: mix one 5 kg pack per kit of MAPEFLOOR CPU/MF, MAPEFLOOR CPU/HD, MAPEFLOOR CPU/RT or MAPEFLOOR CPU/NZ. Packaging: kits of 4x5 kg Alupack bags.
Powder pigment for colouring MAPEFLOOR CPU/MF, MAPEFLOOR CPU/HD, MAPEFLOOR CPU/RT and MAPEFLOOR CPU/NZ.
Mapecolor Paste
TECHNICAL DATA: Appearance: paste. Colour: 19 different RAL colours. Dry substances content (%): 99 ± 1. Application temperature range: from +10°C to +30°C. Storage: 24 months in its original sealed packaging. Application: mixed with epoxy products during preparation. Consumption: 0.7 kg per kit (A+B) of PRIMER SN, MAPEFLOOR I 300 SL and MAPEFLOOR I 500 W. Packaging: 0.7 kg buckets.
System for colouring MAPEFLOOR I 300 SL, MAPEFLOOR I 500 W, MAPEFLOOR PU 410, PRIMER SN, MAPEFLOOR DECOR 700, MAPEFLOOR I 360 AS and MAPEFLOOR I 390 EDF. N.B.: other RAL colours available upon request (minimum quantity 25 kg).
Mapecrete Creme Protection
Solvent-free, silane-based, thixotropic water repellent in water dispersion, ideal for hydrophobic treatments on concrete.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Mapecrete LI Hardener
Surface treatment in liquid form made from lithium silicate with a consolidating effect, for new or old concrete floors and concrete surfaces broadcast with quartz sand.
124
TECHNICAL DATA: Colour: yellowish white. Appearance: creamy. Density (g/cm³): 0.9. Dry substances content (%): 80. Flash point (ISO 3679): +64°C. Storage: 12 months in its original sealed packaging. Application: squeegee, (airless) spray system, brush or roller. Consumption: 0.1-0.4 kg/m² according to the level of absorption of the concrete. Packaging: 25 kg drums.
TECHNICAL DATA: Application temperature range: from +5°C to +40°C. Minimum waiting time for the product to penetrate: 30 min. Loss of material with Taber abrasion test ISO 5940 (mg): 35. Capillary absorption EN 13057 (kg/m²∙h0.5): 1.3. Storage: 12 months in its original sealed packaging. Application: by spray with a low pressure pump. Consumption: 0.2-0.4 kg/m² according to the level of porosity of the concrete. Packaging: 25 kg tanks.
Mapecrete Stain Protection
TECHNICAL DATA: Application temperature range: from +10°C to +30°C. Absorption by immersion in oil (%): 0.35. Capillary absorption EN 13057 (kg/m²∙h0.5): 0.25. Storage: 12 months in its original sealed packaging. Application: by spray, airless spray or brush. Consumption: 0.1-0.3 kg/m² according to the level of porosity of the concrete. Packaging: 25 kg tanks.
Hydro-oil repellent and anti-stain treatment for concrete, natural stone and cementitious surfaces made from modified organic polymers in water solution.
Mapefloor Binder 930
TECHNICAL DATA: Colour of mix: transparent. Consistency of mix: fluid. Workability time: 70 minutes. Complete set to light foot traffic time: 48 hours. Application temperature range: from +8°C to +30°C. Binder/inert consumption: 1:20. Compressive strength after 7 days at +23°C (EN 196-1): 12.47 N/mm². Flexural strength after 7 days at +23°C (EN 196-1): 5.19 N/mm². Storage: 12 months in its original sealed packaging. Application: rake, straight-edge, smooth trowel and mechanical vibro-compactor. Consumption: 1 kg/m² per cm of thickness. Packaging: 5 kg drums.
One-component, aliphatic polyurethane binder for decorative open-pore floors made with natural open-pore aggregates.
Mapefloor CPU/COVE
TECHNICAL DATA: Mixing ratio: A/B/C = 1.6/1.4/18 plus 0.25 parts by weight of MAPECOLOR PASTE. Colour of mix: depending on the colour of MAPECOLOR PASTE used. Pot life of mix at +20°C: 20 minutes. Full hardening time: 5 days. Compressive strength after 28 days (EN 196-1): ≥ 40 N/mm². Shore D hardness after 28 days: 75-80. Storage: 12 months in its original sealed packaging. Application: suitable steel or plastic tools. Consumption: according to the size and shape of the edge or corner to be blended: approx. 2 kg/l. Packaging: 21 kg kits (A+B+C).
Three-component polyurethane/ cement-based mortar for making covings and details.
Mapefloor CPU/HD
Three-component, high-strength polyurethane-cement mortar with high resistance to chemicals for industrial floors, applied in thicknesses 6 to 9 mm. Complies with standards applied in the foodstuffs sector.
EN 13813
CT
CEMENTITIOUS SCREED
C50-F10 AR0.5-B2.0-IR20
TECHNICAL DATA: Mixing ratio: A/B/C = 2.6/2.7/20.5 plus 5 kg of MAPECOLOR CPU. Colour of mix: grey, beige, ochre, red and green. Consistency of mix: thick. Pot life of mix at +20°C: 15 minutes. Dust dry at +23°C and 50% R.H.: 2-4 hours. Set to light foot traffic at +23°C and 50% R.H.: 8 hours. Final hardening time: 4 days. Slip resistance (pendulum test method EN 13036-4): – dry: 85 (class II); – wet: 60 (class I). Storage: 12 months in its original sealed packaging. Application: American smooth trowel. Consumption: 2 kg/m² per mm of thickness. Packaging: 25.8 kg kits (A+B+C).
125
11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS
Mapefloor CPU/MF
Three-component, self-levelling polyurethane-cement mortar with high resistance to chemicals for industrial floors, applied in thicknesses 3 to 6 mm. Complies with standards applied in the foodstuffs sector.
EN 13813
CT
CEMENTITIOUS SCREED
C50-F15 A6-B2.0-IR10
Mapefloor CPU/NZ
Three-component easy-to-apply high-strength polyurethane/cementbased mortar with high resistance to chemicals for coating industrial floors in layers from 4 to 6 mm thick.
EN 13813
C60-F10 A9-B2.0
Mapefloor CPU/RT
Three-component, high-strength, easyto-apply, polyurethane-cement mortar with high resistance to chemicals for coating industrial floors in layers from 6 to 9 mm thick. Complies with standards applied in the foodstuffs sector.
EN 13813
C60-F10 A9-B2.0
Mapefloor CPU/TC
Three-component polyurethane/cementbased formulate for coating walls and as a finishing coat on polyurethane/ cementitious systems for industrial floors.
126
EN 13813
CT
CEMENTITIOUS SCREED
C40-F7 AR0.5-B2.0
TECHNICAL DATA: Mixing ratio: A/B/C = 5.2/5.4/20 plus 5 kg of MAPECOLOR CPU. Colour of mix: grey, beige, ochre, red and green. Consistency of mix: self-levelling fluid. Pot life of mix at +20°C: 15 minutes. Dust dry at +23°C and 50% R.H.: 2-4 hours. Set to light foot traffic at +23°C and 50% R.H.: 24 hours. Final hardening time: 4 days. Compressive strength: 50 N/mm². Flexural strength: 15 N/mm². Storage: 12 months in its original sealed packaging. Application: smooth trowel or rake with spacers. Consumption: 1.7 kg/m² per mm of thickness. Packaging: 30.6 kg kits (A+B+C).
TECHNICAL DATA: Mixing ratio: A/B/C: 2.6/2.7/16 plus 5 kg of MAPECOLOR CPU. Colour of mix: grey, beige, red, green, ochre yellow. Consistency of mix: viscous-fluid. Pot life of mix at +20°C: 15 mins. Dust dry at +23°C and 50% R.H.: 2-4 hours. Set to foot traffic at +23°C and 50% R.H.: 8 hours. Complete hardening time: 4 days. Flexural strength after 28 days (UNI EN 13892-2): 14.10 N/mm². Compressive strength after 28 days (UNI EN 13892-2): 62.80 N/mm². Storage: 12 months in its original sealed packaging. Consumption: 1.9 kg/m² per mm of thickness. Packaging: 21.3 kg kit (A+B+C).
TECHNICAL DATA: Mixing ratio: A/B/C : 2.6/2.7/18 plus 5 kg of MAPECOLOR CPU. Colour of mix: grey, beige, red, green, ochre yellow. Consistency of mix: thick. Pot life of mix at +20°C: 15 min. Dust dry at +23°C and 50% R.H.: 2 h - 4 h. Set to light foot traffic at +23°C and 50% R.H.: 8 h. Complete hardening time: 4 days. Flexural strength after 28 days (EN 13892-2): 13.80 N/mm². Compressive strength after 28 days (EN 13892-2): 61.70 N/mm². Storage: 12 months in a dry area in its original, closed packaging. Consumption: 1.9 kg/m² per mm of thickness. Packaging: 23.3 kg kits (A+B+C).
TECHNICAL DATA: Mixing ratio: A/B/C = 1.6/1.4/1.7 plus 0.47% by weight of MAPECOLOR PASTE. Colour of mix: grey, beige, ochre yellow, red and green. Consistency of mix: fluid. Pot life of mix at +20°C: 15 mins. Dust dry at +23°C and 50% R.H.: 2-4 hours. Set to foot traffic at +23°C and 50% R.H.: 24 hours. Full hardening time: 5 days. Storage: 12 months in its original sealed packaging. Application: steel or rubber trowel or short or medium-haired roller. Consumption: – thickness of coat 0.2-0.25 mm: 0.3-0.35 kg/m²; – finishing coat on MAPEFLOOR CPU/MF with a dry-shake finish of quartz sand: 0.3-0.6 kg/m². Packaging: 4.7 kg kits (A+B+C).
Mapefloor Decor 700
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 1 : 4. Colour of mix: cream. Consistency of mix: paste. Dust dry at +23°C and 50% R.H.: 2 hours. Set to light foot traffic at +23°C and 50% R.H.: 12 hours. Final hardening time: 7 days. Compressive strength after 7 days (EN 196-1): 50 N/mm². Flexural strength after 7 days (EN 196-1): 25 N/mm². Taber abrasion resistance after 7 days (CS17 disk 1000 g - 1000 revs): 50 mg. Storage: 12 months in its original sealed packaging. Application: smooth trowel. Consumption: from 1 to 1.5 kg/m² per coat according to the characteristics of the substrate and type of decorative finish required. Packaging: 10 kg kits (A+B).
Two-component, solvent-free epoxy paste in water dispersion to create floors with a trowel-effect or mottled finish. May be coloured with MAPECOLOR PASTE.
Mapefloor EP19
Three-component acid and wearresistant epoxy mortar for floors.
EN 13813
SR
SYNTHETIC RESINS
B2.0 AR0.5-IR20-BFL-s1
Mapefloor Finish 50 N
TECHNICAL DATA: Mixing ratio: comp A: comp. B = 4.9 : 5.1. Colour of mix: transparent. Consistency of mix: fluid. Dry substances content (%): 65. Density of mix (kg/m³): 1,040. Viscosity of mix (mPa·s): 345. Buchholz hardness (after 7 days at +23°C) (DIN 53153): 111. Dust dry (at 23°C and 50% R.H.): approx. 6 h. Set to light foot traffic (at +23°C and 50% R.H.): 24 h. Complete hardening time: 7 days. Taber Test (after 7 days at +23°C and 50% R.H.) 1,000 cycles/1,000 revs, CS 17 disk) (DIN 53109) (mg): 60. Storage: 12 months in its original packaging at +5°C to +30°C. Consumption: 0.05-0.3 kg/m² per coat according to absorbency. Packaging: 10 kg kits (A+B).
Two-component, aliphatic, transparent polyurethane finish for absorbent surfaces.
Mapefloor Finish 52 W
Two-component, polyurethane finishing product in water dispersion with low yellowing properties, for anti-dust and anti-oil treatments.
TECHNICAL DATA: Mixing ratio: A/B/C = 7.5/2.5/90. Consistency of mix: damp sand. Application temperature range: from +5°C to +30°C. Workability time: from 30 to 40 minutes. Set to light foot traffic: 6 hours. Ready for use: 12 hours. Resistance to temperatures: from -20°C to +120°C. Resistance to oils: excellent. Resistance to acids and alkalis: excellent. Compressive strength after 7 days (EN 196/1): 50 N/mm². Flexural strength after 7 days (EN 196/1): 20 N/mm². Taber abrasion resistance after 7 days (H22 disk 1000 g - 1000 revs): 1.1 g. Storage: 24 months in its original sealed packaging. Application: trowel and smooth metal trowel. Consumption: 20 kg/m² per cm of thickness. Packaging: 10 kg kits (A+B+C).
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 87 : 13. Colour of mix: opaline. Consistency of mix: fluid. Workability time: 30 minutes. Dust dry (at +23°C and 50% R.H.): 20-35 minutes. Set to light foot traffic (at +23°C and 50% R.H.): 12 hours. Final hardening time: 7 days. Taber Test (after 7 days, CS17 disk, 1000 cycles, 1000 g): 50 mg. Bucholz hardness (after 7 days): 71. Storage: 12 months in its original sealed packaging. Application: short-haired roller such as mohair, by spray or airless spray system. Consumption: 50-150 g/m² per coat according to the absorption of the substrate. Packaging: 5.4 kg kits (A+B).
127
11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS
Mapefloor Finish 53 W/L
TECHNICAL DATA:
Mixing ratio: comp. A : comp. B = 10 : 1. Colour of mix: transparent. Consistency of mix: fluid. Workability time: 15-20 minutes at +23°C. Varnishing: from 3 to 5 hours. Sanding: after 12 hours. Set to the touch: 40 minutes. Dust dry at +23°C and 50% R.H.: 40 minutes. Set to light foot traffic at +23°C and 50% R.H.: 6-7 hours. Final hardening time: 12 hours at +23°C. Gloss: 80. Taber Test (after 7 days, CS17 disk, 1000 cycles, 1000 g): 22 mg. Storage: 12 months in its original sealed packaging. Application: short-haired roller such as mohair or airless spray system. Consumption: 0.1-0.2 kg/m² according to the grade of finish required for the coating material. Packaging: 2 kits (A+B) of 5 + 0.5 l units.
Two-component, aliphatic, transparent, shiny polyurethane finish in water dispersion with no NMP for protecting resin and cementitious systems.
Mapefloor Finish 54 W/S
TECHNICAL DATA:
Mixing ratio: comp. A : comp. B = 10 : 1. Colour of mix: transparent. Consistency of mix: fluid. Workability time: 15-20 minutes at +23°C. Varnishing: from 3 to 5 hours. Sanding: after 12 hours. Set to the touch: 40 minutes. Dust dry at +23°C and 50% R.H.: 40 minutes. Set to light foot traffic at +23°C and 50% R.H.: 6-7 hours. Final hardening time: 12 hours at +23°C. Gloss: 50. Taber Test (after 7 days, CS17 disk, 1000 cycles, 1000 g): 22 mg. Storage: 12 months in its original sealed packaging. Application: short-haired roller such as mohair or airless spray system. Consumption: 0.1-0.2 kg/m² according to the grade of finish required for the coating material. Packaging: 2 kits (A+B) of 5 + 0.5 l units.
Two-component, aliphatic, transparent, matt polyurethane finish in water dispersion with no NMP for protecting resin and cementitious systems.
Mapefloor Finish 55
TECHNICAL DATA: Mixing ratio: comp A : comp B = 5.1 : 4. Colour of mix: RAL colours - Please, contact head office. Consistency of mix: fluid paste. Density of mix (kg/m³): 1,250. Viscosity of mix (mPa·s): 1,200 ± 200. Pot life at +23°C: 2 h. Application temperature range: from +5°C to +30°C. Final hardening time at +23°C: 2 days. Maximum deformation after 7 days at +23°C + 14 days at +50°C (%): 120. Tear strength after 7 days at +23°C + 14 days at +50°C (N/mm): 21.5. Taber abrasion resistance (CS17 disk - 1,000 g - 1,000 revs) after 7 days at +23°C (mg): 86. Application: roller or airless spray system. Storage: 12 months in its original sealed packaging at a temperature between +15°C and +25°C. Consumption: 0.15-0.35 kg/m². Packaging: 9.1 kg kits (A+B).
Two-component, aliphatic, highly-flexible polyurethane finish resistant to wear and UV rays.
Mapefloor Finish 58 W Two-component, aliphatic, transparent or coloured, matt polyurethane finish in water dispersion.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
128
TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 10:1 transparent 11:1 if coloured. Colour of mix: transparent or coloured. Consistency of mix: fluid. Density of mix (kg/m³): 1,065-1,095. Abrasion resistance Taber abrasion-meter (CS17 disk, 1000 g) 1000 cycles (mg): 30 (after 7 days). Gloss (Gloss 60°): 10. Storage: 12 months in its original packaging at +12°C to +30°C. Consumption: 0.1-0.2 kg/m² according to the grade of finish required for the coating. Packaging: 5.5 kg transparent or 6 kg coloured kits (A+B).
Mapefloor Finish 415 Two-component, aromatic, flexible, wear-resistant elastic coloured polyurethane finish.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
PRINCIPLES
PI-MC-PR-RC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Mapefloor Finish 451
Two-component, aliphatic, flexible, wear and UV resistant, elastic, coloured, polyaspartic finish.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
PRINCIPLES
PI-MC-PR-RC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Mapefloor Finish 630
TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 70 : 30. Colour of mix: coloured. Please contact Head Office. Consistency of mix: fluid paste. Density of mix (kg/m³): 1,480. Viscosity of mix (mPa·s): 1,500 ± 200 (rotor 4 - 50 revs). Pot life at +23°C: 40 mins. Dust dry at 23°C, 150 microns on glass: 90 mins. Set to foot traffic at +23°C: 24 h. Final hardening time at +23°C: 3 days. Maximum deformation after 7 days at +23°C + 14 days at +50°C: 43%. Tear strength after 7 days at +23°C + 14 days at +50°C (N/mm): 97. Tensile strength after 7 days at +23°C + 14 days at +50°C (N/mm²): 12.2. Taber abrasion resistance (CS17 disk - 1,000 g - 1,000 revs) after 7 days at +23°C (mg): 95. Shore A hardness: 85. Storage: 12 months in its original packaging at +15°C to +25°C. Theoretical consumption: 0.6-0.8 kg/m². Packaging: 20 kg kits (A + B).
TECHNICAL DATA: Mixing ratio: comp. A: comp. B: = 10 : 0.15. Colour of mix: transparent, milky. Consistency of mix: fluid. Dry substances content (3 h - 105°C) (%): 23. Density of mix (kg/m³): 1,028. Viscosity of mix (mPa·s): 25 (# 1 - 100 rpm). Workability time: 60 min. Surface temperature: from +12°C to +30°C. Varnishing: after 6-8 h at +23°C. Dust dry at +23°C and 50% R.H.: 2 h. Abrasion resistance (Taber abrasimeter) (CS17 disk 500 revs - 1,000 g) after 7 days (mg): 65. Set to light foot traffic at +23°C and 50% R.H.: 24 h. Final hardening time: 4 days. Storage: 12 months in its original sealed packaging. Protect from frost. Application: short-haired roller such as mohair or a suitable airless spray system. Consumption: 0.15-0.2 kg/m² according to the grade of porosity and absorption of the substrate. Packaging: 2 kits (A+B) of 10 + 0.150 kg units.
Two-component, protective acrylic filming agent in water dispersion for concrete, ULTRATOP and ULTRATOP LIVING floors.
Mapefloor I 300 SL
Two-component, multi-purpose, neutralcoloured epoxy formulate for industrial floor coatings up to 4 mm thick. May be coloured with MAPECOLOR PASTE. Complies with standards applied in the foodstuffs sector.
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 80 : 20. Colour of mix: coloured. Please contact Head Office. Consistency of mix: liquid/paste. Density of mix: 1.35 kg/m³. Viscosity of mix: 2,000-2,500 (mPa·s). Pot life at (EN ISO 9514): 10 mins. (+ 15%) to reach +40°C. Set to light foot traffic at +23°C: 24 hours. Final hardening time at +23°C: 3 days. Elongation at failure after 7 days at +23°C (DIN 53504): 70%. Tear strength after 7 days at +23°C (DIN 53515): 90 N/mm. Tensile strength after 7 days at +23°C (DIN 53504): 15 N/mm². Taber abrasion resistance (CS17 disk - 1,000 g - 1,000 revs) after 7 days at +23°C: 90 mg. Storage: 12 months in a covered, dry place at a temperature between +15°C and +25°C. Theoretical consumption: 0.5-0.8 kg/m². Packaging: 12.5 kg kits (A+B).
EN 13813
SR
SYNTHETIC RESINS
B2.0 AR0.5-IR20-BFL-s1
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Colour of mix: neutral. Consistency of mix: fluid. Dust dry at +23°C and 50% R.H.: 2-4 hours. Set to light foot traffic at +23°C and 50% R.H.: 24 hours. Final hardening time: 7 days. Taber Test after 7 days (EN ISO 5470-1) CS17 disk, 1000 cycles, 1000 g at +23°C - 50% R.H.: 70 mg. Storage: 24 months in its original sealed packaging. Application: by roller or flat or notched trowel. Consumption: – 2.0 kg/m² for 2 mm thick self-levelling coatings on substrates primed with PRIMER SN; – 0.9 kg/m² for intermediate layers in 3 mm thick non-slip coatings on substrates primed with PRIMER SN; – 0.6 kg/m² for finishing layers in 1 mm and 3 mm thick non-slip coatings on substrates primed with PRIMER SN. Packaging: 20 kg kits (A+B).
129
11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS
Mapefloor I 300 SL TRP
TECHNICAL DATA:
Mixing ratio: comp. A : comp. B = 100 : 50. Colour of mix: transparent. Consistency of mix: fluid. Pot life of mix: approx. 30 minutes. Dust dry at +23°C and 50% R.H.: 6 hours. Set to light foot traffic at +23°C and 50% R.H.: 24 hours. Final hardening time: 7 days. Compressive strength (ASTM D 695): 55 N/mm². Flexural strength (ISO 178): 25 N/mm². Surface hardness (shore D): 80. Taber Test CS17 disk, 1000 cycles, 1000 g (DIN 52108): 80 mg. Storage: 12 months in its original sealed packaging. Application: N° 7 notched trowel. Consumption: approx. 1-1 kg/m² to form a 1 mm thick coat. Packaging: 18 kg kits (A+B).
Two-component, transparent, nonyellowing epoxy coatings applied at a thickness of 1 mm for finishing coats on epoxy resin systems.
Mapefloor I 306 CR
Two-component, low emission epoxy formulate for coating self-levelling floors in clean rooms.
EN 13813 SR
SYNTHETIC RESINS
B2.0 AR0.5-IR20
Available only upon request.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
PRINCIPLES
PI-MC-PR-RC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Mapefloor I 309 CR
Two-component, low emission epoxy formulate for coating self-levelling floors in clean rooms.
EN 13813 SR
SYNTHETIC RESINS
B2.0 AR0.5-IR20-BFL-s1
Available only upon request.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
PRINCIPLES
PI-MC-PR-RC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
MAPEFLOOR I 309 CR
Particle (vs. PA6): ISO 2
Mapefloor I 320 SL CONCEPT
Self-levelling epoxy coating with a coloured granular finish for abrasionresistant floors.
130
TECHNICAL DATA: Consistency of mix: thick liquid. Colour: RAL colours. Please contact head office for the complete range. Application: smooth notched trowel (with “V” shaped notches). Consumption: smooth self-levelling coating - avarage thickness 2 mm 2.3 kg/m². Concentration of airborne particles (ISO 14644-1): ISO Class 3. VOC emissions (ISO 14644-8): ISO-ACCm Class -6.7. Storage: 24 months in its original packaging in a dry place at a temperature of +5°C and +35°C. Packaging: 20 kg kits (A+B); (comp. A = 16 kg; comp. B = 4 kg).
TECHNICAL DATA: Consistency of mix: thick liquid. Colour: RAL colours. Please contact head office for the complete range. Application: smooth notched trowel (with “V” shaped notches). Consumption: smooth self-levelling coating - avarage thickness 2 mm 2.3 kg/m². Concentration of airborne particles (ISO 14644-1): ISO Class 2. VOC emissions (ISO 14644-8): ISO-ACCm Class < -9.6. Storage: 24 months in its original packaging in a dry place at a temperature of +5°C and +35°C. Packaging: 19.5 kg kits (A+B); (comp. A = 16 kg; comp. B = 3.5 kg).
MAPEFLOOR I 309 CR
Outgassing VOC (23°C/90°C): ISO-ACCm Class <-9.6 / tested
EN 13813
SR
SYNTHETIC RESINS
B2.0 AR0.5-IR20-CFL-s1
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 100 : 22. Colour of mix: light grey, dark grey, light blue, dark blue and red. Consistency of mix: fluid. Compressive strength after 7 days at +23°C (DIN EN 196-1): 52 N/mm². Flexural strength after 7 days at +23°C (DIN EN 196-1): 31 N/mm². Surface hardness (shore D): 75. Taber Test (after 7 days, CS17 disk, 1000 cycles, 1000 g): 80 mg. Storage: 12 months in its original sealed packaging. Application: smooth trowel. Consumption: 3 kg/m². Packaging: 16.8 kg kits (A+B).
Mapefloor I 350 SL
Two-component, multi-purpose, neutralcoloured, epoxy treatment for industrial floors at a thickness up to 4 mm. MAPEFLOOR I 350 SL meets the requirements of UNI CEI 11170 - railway vehicles - Guidelines for fire protection of railway vehicles and vehicles with guiding rails.
EN 13813
SR
SYNTHETIC RESINS
B2.0 AR0.5-IR20-BFL-s1
Mapefloor I 360 AS
Two-component, self-levelling epoxy formulate for high strength, electrically conductive coatings.
EN 13813
SR
SYNTHETIC RESINS
B2.0 AR0.5-IR20-EFL
Mapefloor I 390 EDF
Two-component, self-levelling epoxy formulate for high strength, dissipative coatings.
EN 13813
SR
SYNTHETIC RESINS
B2.5 AR0.5-IR20-BFL-s1
Mapefloor I 500 W
Two-component, vapour-permeable, neutral-coloured epoxy formulate in water dispersion for industrial floors. May be coloured with MAPECOLOR PASTE.
EN 13813
SR
SYNTHETIC RESINS
B2.0 AR0.5-IR20-BFL-s1
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 75 : 25. Colour of mix: neutral. Consistency of mix: thick fluid. Dust dry at +23°C and 50% R.H.: 2-4 hours. Set to light foot traffic at +23°C and 50% R.H.: 24 hours. Final hardening time: 7 days. Taber Test after 7 days (at +23°C and 50% R.H.) (1,000 cycles/1,000 revs, CS 17 disk) (mg): 70 mg. Storage: 24 months in its original sealed packaging. Application: roller, notched and flat trowel. Packaging: 8 kg kits (A+B). Consuption: – used to obtain a 2 mm-thick self-levelling coating on a substrate primed with PRIMER SN: 2.0 kg/m²; – used to obtain an intermediate layer in a 3 mm-thick, non-slip, multi-layered coating on a substrate primed with PRIMER SN: 0.9 kg/m²; – used to obtain a 1 mm thick or 3 mm-thick final coat in a non-slip, multi-layered coating on a substrate primed with PRIMER SN: 0.6 kg/m². Application: roller or flat, notched trowel. May be coloured using MAPECOLOR PASTE.
TECHNICAL DATA: Mixing ratio: comp. A: comp. B: = 80 : 20 by weight. Colour of mix: neutral. Consistency of mix: fluid. Density of mix (kg/m³): 1,420. Viscosity of mix (Pa·s): 1.5-2.5 (# 3 - 20 rpm). Workability time: approx. 40 min. at +10°C; approx 25 min. at +20°C; approx 15 min. at +30°C. Set to foot traffic: approx. 30 h at +10°C; approx 24 h at +20°C; approx 16 h at +30°C. Electrical resistance (EN 1081) (Ohm): 104
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 80 : 20 by weight. Colour of mix: neutral. Consistency of mix: fluid. Density of mix (kg/m³): 1,420. Viscosity of mix (Pa·s): 1.5-2.5 (# 3 - 20 rpm). Workability time: approx. 40 min. at +10°C; approx 25 min. at +20°C; approx 15 min. at +30°C. Set to foot traffic: approx. 30 h at +10°C; approx 24 h at +20°C; approx 16 h at +30°C. Electrical resistance (EN 1081) (Ohm): 104
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 1 : 12. Colour of mix: neutral. Consistency of mix: fluid. Pot life of mix at +20°C: 20 minutes. Dust dry at +23°C and 50% R.H.: 3-4 hours. Set to light foot traffic at +23°C and 50% R.H.: 16 hours. Final hardening time: 7 days. Taber Test after 7 days (EN ISO 5470-1) CS17 disk, 1000 cycles, 1000 g at +23°C - 50% R.H.: 110 mg. Storage: 12 months in its original sealed packaging. Application: notched or smooth trowel or notched rake. Consumption: – for 2 mm thick smooth self-levelling coatings on substrates primed with MAPECOAT I 600 W: 4 kg/m²; – for 5 mm thick, multi-layered non-slip systems: as first layer: MAPEFLOOR I 500 W 2-2.5 kg/m²; QUARTZ 0.5 5 kg/m²; as second layer: MAPEFLOOR I 500 W 2-2.5 kg/m²; QUARTZ 0.5 5 kg/m²; as finishing layer: MAPEFLOOR I 500 W 0.7 kg/m² Packaging: 26 kg kits (A + B).
131
11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS
Mapefloor I 900
Two-component epoxy binder used for preparing trowelled mortar with a damp earth consistency for industrial floors.
TECHNICAL DATA:
EN 13813
SR
SYNTHETIC RESINS
B2.0 AR0.5-IR20-EFL
Mapefloor I 910
Two-component epoxy binder for trowelled mortar or bonding promoter for resin coatings.
TECHNICAL DATA:
EN 13813
SR
SYNTHETIC RESINS
B2.0 AR0.5-IR10-EFL
Mapefloor I 914
Two-component epoxy primer for substrates and skim coats before applying waterproofing sheaths on bridges or layers of asphalt. Also suitable for injections, reparation and protection of concrete structure in compliance with requirements defined by EN 1504-5 standards.
Mixing ratio: comp. A: comp. B = 100 : 50. Colour of mix: transparent amber. Consistency of mix: viscous fluid. Dust dry at +23°C and 50% R.H.: 2-4 hours. Set to light foot traffic at +23°C and 50% R.H.: 12 hours. Final hardening time: 7 days. Storage: 12 months in its original sealed packaging. Application: – as bonding promoter: roller or smooth trowel; – for mortar: rake and aluminium straight edge. Consumption: – as bonding promoter: 0.5-0.7 kg/m²; – for mortar: recommended ratio for mortar: 1 kg of MAPEFLOOR I 900 (A+B) per 8-13 kg of QUARTZ 1.9, consumption depends on the thickness to be applied. Packaging: 15 kg kits (A + B).
EN 1504-5 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-5 CONCRETE INJECTION
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
PI-MC-IR
Mixing ratio: comp. A : comp. B = 100 : 50. Colour of mix: transparent straw-coloured. Consistency of mix: thick fluid. Dust dry at +23°C and 50% R.H.: 2-4 hours. Set to light foot traffic at +23°C and 50% R.H.: 12 hours. Final hardening time: 7 days. Storage: 12 months in its original sealed packaging. Application: – for priming: roller or smooth trowel; – for mortar: rake and aluminium straight edge. Consumption: – as bonding promoter: 0.5-0.7 kg/m²; – for mortar: recommended ratio for mortar: 1 kg of MAPEFLOOR I 910 (A+B) per 8-13 kg of QUARTZ 1.9, consumption depends on the thickness to be applied. Packaging: 15 kg kits (A + B).
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Colour of mix: transparent yellow. Consistency of mix: fluid. Density of mix (kg/m³): 1080. Viscosity of mix (mPa·s): 270 ± 30 (# 2 - rpm 50). Pot life at +23°C: approximately 30 min. Dust dry at +23°C and 50% R.H.: 3-4 hours. Pull-out after 7 days on dry concrete (N/mm²): > 2.5 (failure of concrete). Pull-out after 7 days on damp concrete (N/mm²): 2.4 (failure of concrete). Storage: 24 months in its original sealed packaging. Application: rubber spatula, roller or brush. Consumption: 250-700 g/m² (depending on the absorption of the substrate). Packaging: 28 kg kit (A + B).
SURFACE PROTECTION SYSTEMS FOR CONCRETE
Mapefloor JA
Two-component thixotropic epoxy adhesive for installing MAPEJOINT 100/25 and MAPEJOINT 100/12 prefabricated polymer jointing profiles and for carrying out small repairs and grouting on concrete surfaces. Also available in Fast version.
132
EN 1504-4 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-5 CONCRETE INJECTION
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Consistency of mix: thixotropic paste. Density of mix (kg/l ): 1.65. Workability time (EN ISO 9514): 70’ (at +23°C). Setting time: 6 h (at +23°C). Storage: 24 months in its original sealed packaging stored at a temperature between +5°C and +30°C. Application: smooth or notched trowel. Consumption: – 1.60-1.65 kg/m² per mm of thickness. – for bonding MAPEJOINT 100/25: 5-6 kg per metre of joint, depending on the irregularity of the substrate. – for bonding MAPEJOINT 100/12: 2,5-3 kg per metre of joint, depending on the irregularity of the substrate. Packaging: 6 kg kit (A+B).
Mapefloor Pore Filler
TECHNICAL DATA: Mixing ratio: component A : component B = 100 : 22. Viscosity of mix at +23°C (mPa·s): 45,000 (#7 - 20 rpm). Colour of mix: beige. Consistency of mix: thixotropic paste. Density of mix (kg/m³): approx. 1,280. Workability time at +20°C: approx. 30 mins. Hardening time at +23°C and 50% R.H.: – dust dry: 2-4 hours; – set to foot traffic: 24 h; – full hardening time: 7 days. Storage: store in a dry, covered place at a temperature of between +5°C and +30°C. The product may be stored at least 12 months in such conditions. Application: – bonding: 3-4 mm notched trowel; – filling pores and smoothing: straight steel or plastic trowel. Consumption: around 0.4÷0.8 kg/m² when used as adhesive actual consumption is heavily influenced by the type of substrate and 0.4÷0.5 kg/m² per layer when used to smooth over MAPE COMFORT FL. Packaging: is supplied in 12.2 kg kits (A+B) (component A = 10 kg component B = 2.2 kg).
Two-component, flexible polyurethane resin-based adhesive and pore filler/smoothing compound for MAPEFLOOR COMFORT SYSTEM AL/X and MAPEFLOOR COMFORT SYSTEM AR/X. Available only upon request.
Mapefloor PU 400 LV
Two-component, self-levelling, neutralcoloured, highly flexible polyurethane binder with fillers.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
PRINCIPLES
PI-MC-PR-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 40 : 60. Colour of mix: beige - grey. Consistency of mix: self-levelling paste. Pot life at +23°C: 20 minutes. Dusty dry: 6 hours. Set to light foot traffic: 8 hours. Final hardening time: 16 hours. Elongation (DIN 53504): approx. 750%. Shore A hardness after 7 days: 55. Storage: 12 months in its original sealed packaging. Application: notched trowel. Consumption: from 1.5 to 2 kg/m² according to the condition of the substrate. Packaging: 20 kg kits (A + B).
Mapefloor PU 410
Two-component, self-levelling, neutralcoloured, fillerized flexible polyurethane binder.
EN 13813
SR
SYNTHETIC RESINS
B1.5 IR20-AR0.5
Mapefloor PU 460
Two-component, aromatic, coloured, elastic, polyurethane resin to form the coating systems MAPEFLOOR COMFORT SYSTEM AR and MAPEFLOOR COMFORT SYSTEM AR/X. Available only upon request.
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 16 : 3.9. Colour of mix: neutral. Consistency of mix: fluid. Pot life at +20°C: 30 minutes. Dusty dry: 2-4 hours. Set to light foot traffic: 24 hours. Final hardening time: 7 days. Elongation (DIN 53504): approx. 112%. Shore A hardness after 7 days: 90. Storage: 12 months in its original sealed packaging. Application: smooth or notched trowel. Consumption: as an intermediate layer in the MAPEFLOOR PARKING SYSTEM HE: MAPEFLOOR PU 410 + MAPECOLOR PASTE: 1.0 kg/m². Packaging: 19.9 kg kits (A + B).
TECHNICAL DATA: Mixing ratio: component A : component B = 75 : 25. Viscosity of mix at +23°C (mPa·s): 1,400. Colour of mix: colours please contact MAPEI Head Office. Consistency of mix: self-levelling fluid paste. Density of mix (kg/m³): approx. 1,250. Workability time at +20°C: approx. 30 mins. Hardening time at +23°C and 50% R.H.: – dust dry: 4 hours; – set to foot traffic: 24 hours; – full hardening time: 7 days. Storage: must be stored in its original packaging in a dry place at a temperature of between +5°C and +35°C. Max. 12 months. Application: notched trowel. Consumption: approx. 2.5 kg/m² for a 2 mm thick layer. Packaging: available in 20 kg kits A+B (component A = 15 kg - component B = 5 kg).
133
11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS
Mapefloor PU 461
Two-component aliphatic, coloured, UV-resistant, elastic, polyurethane, self-levelling resin to form the coating systems MAPEFLOOR COMFORT SYSTEM AL and MAPEFLOOR COMFORT SYSTEM AL/X. Available only upon request.
Primer EP Rustop
Two-component epoxy primer for metal surfaces.
Primer Grip White
Multi-purpose, ready-to-use, synthetic resin-based bonding promoter in water dispersion with silica aggregates and very low emission of volatile organic compounds (VOC). For internal floors and walls. Bonding promoter for decorative cementitious skimming mortars from the ULTRATOP LOFT range.
Primer LT
Acrylic adhesion promoter for ULTRATOP LOFT and cementitious skimming mortars. For internal use.
134
TECHNICAL DATA: Mixing ratio: component A : component B = 75 : 25. Viscosity of mix at +23°C (mPa·s): 3,500. Colour of mix: colours please contact MAPEI Head Office. Consistency of mix: self-levelling fluid paste. Density of mix (kg/m³): approx. 1,300. Workability time at +20°C: approx. 40 mins. Hardening time at +23°C and 50% R.H.: – dust dry: 4 hours; – set to foot traffic: 24 hours; – full hardening time: 7 days. Storage: must be stored in its original packaging in a dry place at a temperature of between +5°C and +35°C. Max. 12 months. Application: notched trowel. Consumption: approx. 2.8 kg/m² for a 2 mm thick layer. Packaging: available in 20 kg kits A+B (component A = 15 kg - component B = 5 kg).
TECHNICAL DATA: Mixing ratio: comp. A : comp B = 100 : 30. Colour of mix: white. Consistency of mix: liquid. Dry substances content (%): 70. Density of mix (kg/m³): 1,100. Viscosity of mix (mPa·s): 500 (# 3 - 50 rpm). Workability time: 15-20 minutes at +20°C. Surface temperature: at least +10°C. Pot life: 6 h at +20°C. Varnishing: after 6-8 h at +20°C. Dusty dry: after 2 h at +20°C. Final hardening time: 24 h. Storage: 12 months in its original sealed packaging. Application: by brush, roller or airless spray system. Consumption: 0.2 kg/m². Packaging: 5 kg kits (A + B).
TECHNICAL DATA: Consistency: creamy liquid. Colour: white. Application: roller or brush. Consumption: 0.2 and 0.3 kg/m², depending on the absorbency of the substrate. Storage: 12 months in a dry area in its original, sealed packaging at a temperature of +5°C to +35°C. Packaging: 10 kg drums.
TECHNICAL DATA: Consistency: fluid liquid. Colour: white. Application: roller or brush. Consumption: 0.1 kg/m² between consecutive coats of ULTRATOP LOFT 0.1 and 0.2 kg/m², for other substrates, depending on the porosity. Storage: 12 months in a dry area in its original, sealed packaging at a temperature of +5°C to +30°C. Packaging: 5 kg cans.
Primer SN
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.
EN 13813
SR
SYNTHETIC RESINS
B2.0 BFL-s1
Primer SN Rasante
TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: thick fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ± 100 (# 3 - rpm 50). Pot life: 30 min. Application temperature range: from +8°C to +35°C. Dust dry at +23°C and 50% R.H.: 6 hours. Set to light foot traffic at +23°C and 50% R.H.: 24 hours. Final setting time: 7 days. Storage: 24 months in its original sealed packaging. Application: flat trowel or flat rake. Consumption: 0.3-0.7 kg/m² per coat, depending on the absorbency and characteristics of the substrate. Packaging: 20 kg kits (A+B); 5 kg kits (A+B).
TECHNICAL DATA: Consistency of mix: paste. Colour: straw yellow. Density of mix (kg/m³): 1,550. Viscosity of mix (mPa·s): 45 (# 6 - 20 rpm). Packaging: 25 kg kits (A+B).
Two-component, epoxy skimming product for cementitious surfaces, also on vertical surface.
Primer W-AS
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 25 : 75. Colour of mix: black. Consistency of mix: fluid. Density of mix (kg/m³): 1,220. Viscosity of mix (mPa·s): 950 (# 4 - 50 rpm). +20°C +30°C Workability time: +10°C approx. 120 min. approx. 90 min. approx. 30 min. Application temperature range: from +10°C to +30°C. Electrical resistance: 103
Two-component epoxy primer in water dispersion for electrically conductive coatings.
11.2 Cementitious based products__________________________________________________________________
Mapetop N AR6
Pre-blended, ready-to-use industrial hardener for concrete floors made from special quartz in a granulometric curve, Portland cement and special additives.
EN 13813
CEMENTITIOUS SCREED
C70-F7 A6-A1FL
TECHNICAL DATA: Colour of mix: grey, light grey, anthracite, green, brown, red. Density of mix (kg/m³): 2,200. pH of mix: >12.5. Application temperature range: from +5°C to +35°C. Compressive strength EN 13892/2 (N/mm²): 30 (after 1 day); 70 (after 28 days). Flexural strength EN 13892/2 (N/mm²): 6 (after 1 day) 8 (after 28 days). Bond strength on concrete (substrate in MC 0.40 water/cement ratio = 0.40) according to EN 1766 (N/mm²): ≥ 2 (after 28 days). Impermeability to water - penetration depth EN 12390/8 (mm): < 5. Coefficient of capillary absorption EN 1062/3 (kg/m²·h0.5): < 0.1. Böhme abrasion resistance EN 13892/3: Class 6. Reaction to fire EN 13501: Euroclass A1FL. Storage: 12 months in its original sealed packaging. Application: by dusting. Consumption: – manual application: from 1.5 to 2.5 kg/m² per coat; – mechanical application: from 3 to 5 kg/m². Packaging: 25 kg bags.
135
11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS
Mapetop S AR3
Pre-blended dry-shake hardener for concrete floors made of special aggregates based on corundum, Portland cement and special additives.
EN 13813
CEMENTITIOUS SCREED
C70-F7 A3-A1FL
Ultratop
Self-levelling, ultra-quick hardening mortar with special hydraulic binders, applied at a thickness between 5 and 40 mm to create abrasionresistant floors.
Ultratop Base Coat
One-component acrylic formulate in water dispersion used as a base coat before applying protective finishes on ULTRATOP, ULTRATOP LIVING and ULTRATOP LOFT.
Ultratop Easycolor
Colouring solution for cementitiousbased ULTRATOP LOFT systems.
136
EN 13813
CEMENTITIOUS SCREED
C40-F10 A9-A2FL-s1
TECHNICAL DATA: Colour of mix: grey; other colours available on request. Density of mix (kg/m³): 2,400. pH of mix: >12.5. Application temperature: +5°C to +35°C. Compressive strength (EN 13892/2) (N/mm²): 50 (after 3 days) - 70 (after 28 days). Flexural strength (EN 13892/2) (N/mm²): 7 (after 3 days) - 9 (after 28 days). Adhesion to concrete (substrate in MC 0.40 water/cement ratio = 0.40) according to EN 1766 (N/mm²): ≥ 2 (after 28 days). Böhme abrasion resistance EN 13892-3: Class 3. Reaction to fire EN 13501: Euroclass A1FL. Storage: 12 months in its original sealed packaging. Application: dry-shaking. Consumption: – manual application: 2.5 to 5.5 kg/m² per coat; – mechanical application: 5 to 8 kg/m². Packaging: 25 kg bags.
TECHNICAL DATA: Colour: white, beige, light grey, red, anthracite and standard. Mixing ratio: 20-22 parts of water per 100 parts in weight of ULTRATOP. Applicable thickness: from 5 to 40 mm. Self-levelling: yes. Workability time: 15 minutes. Setting time: 60 minutes. Set to light foot traffic: 3-4 hours. Compressive strength after 28 days at +23°C: ≥ 40 N/mm². Flexural strength after 28 days at +23°C: ≥ 11 N/mm². Böhme abrasion resistance after 28 days at +23°C: 9 cm³/50 cm². EMICODE: EC1 Plus - very low emission. Storage: 12 months in its original sealed packaging. Application: by hand or mortar pump. Consumption: 16.5-17.5 kg/m² per cm of thickness. Packaging: 25 kg bags.
TECHNICAL DATA: Colour: milky white. Consistency: liquid. Storage: 12 months in a dry, covered area in its original packaging at a temperature of +12°C to +30°C. Protect from freezing weather. Application: ready-mixed. Apply a single coast to form an even, thin film with a medium pile roller (such as mohair); go over the surface in criss-cross strokes without leaving excess product on the surface. Consumption: 50-80 g/m² depending on the porosity of the substrate. Packaging: 10 kg tanks.
TECHNICAL DATA: Consistency: liquid. Colours: various. Storage: 18 months in a dry area in its original packaging at a temperature of +5°C to +30°C. Application: mix with ULTRATOP LOFT F or ULTRATOP LOFT W using an electric mixer at low speed to form a well-blended, lump-free coloured mix. Consumption: 1 x 1.5 l drum every 5 kg of ULTRATOP LOFT. Packaging: 1.5 l drums.
Ultratop Living
Self-levelling, ultra-quick setting mortar with special hydraulic binders, applied at a thickness between 5 and 15 mm to create abrasion-resistant internal floors
EN 13813
CEMENTITIOUS SCREED
C30-F7 A12-A2FL-s1
Ultratop Loft F
One-component trowellable coarsetextured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.
EN 13813
C25-F10 A9-A2FL-s1 A2-s1-d0
Ultratop Loft W
One-component trowellable finetextured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.
Ultratop Stucco
Grout made from special hydraulic binders for sealing micro-porosity which forms after the first polishing phase of ULTRATOP.
EN 13813
C25-F10 A9-A2FL-s1 A2-s1-d0
TECHNICAL DATA: Colour: white, light grey, anthracite and natural. Mixing ratio: 19-21 parts of water per 100 parts in weight of ULTRATOP LIVING. Applicable thickness: from 5 to 15 mm. Self-levelling: yes. Workability time: 15 minutes. Setting time: 60-80 minutes. Set to light foot traffic: 3-4 hours. Compressive strength after 28 days at +23°C: ≥ 32 N/mm². Flexural strength after 28 days at +23°C: ≥ 9 N/mm². Böhme abrasion resistance after 28 days at +23°C: 11 cm³/50 cm². EMICODE: EC1 Plus - very low emission. Storage: 12 months in its original sealed packaging. Application: by hand or mortar pump. Consumption: 16.5-17.5 kg/m² per cm of thickness. Packaging: 25 kg bags.
TECHNICAL DATA: Consistency: powder. Colour: white or natural. Bulk density: 1,100 kg/m³. Mixing ratio: approx. 25-29 parts of water per 100 parts by weight of ULTRATOP LOFT F. Workability time: 20 minutes. Setting time: 80 minutes. Set to foot traffic: 3 hours. Compressive strength at +23°C after 28 days: 25 N/mm². Flexural strength at +23°C after 28 days: 10 N/mm². Abrasion resistance - Taber abrasion meter (H22 disk, 500 g, 200 revs) after 28 days: 500 mg. Abrasion resistance class (Böhme test) after 28 days: A9. Application: smooth steel, Teflon or rubber trowel. Consumption: 0.7-1 kg/m². Packaging: 20 kg bags. Kits containing 4x5 kg alupacks.
TECHNICAL DATA: Consistency: fine powder. Colour: white or natural. Bulk density: 900 kg/m³. Mixing ratio: approx. 32-35 parts of water per 100 parts by weight of ULTRATOP LOFT W. Workability time: 20 minutes. Setting time: 80 minutes. Set to foot traffic: 3 hours. Compressive strength at +23°C after 28 days: 25 N/mm². Flexural strength at +23°C after 28 days: 12 N/mm². Abrasion resistance - Taber abrasion meter (H22 disk, 500 g, 200 revs) after 28 days: 500 mg. Abrasion resistance class (Böhme test) after 28 days: A9. Application: smooth steel, Teflon or rubber trowel. Consumption: 0.7-1 kg/m². Packaging: 20 kg bags. Kits containing 4x5 kg alupacks.
TECHNICAL DATA: Consistency: fine powder. Colour: white, beige, light grey, red, anthracite and standard. Storage: 12 months in its original sealed packaging. Bulk density: 850 kg/m³. Mixing ratio: 30-40 parts of water per 100 parts by weight of ULTRATOP STUCCO. Application: rubber trowel. Consumption: according to the micro-porosity. Packaging: 5 kg drums.
137
11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS 11.3 Complementary products for resin and cementitious floors ________________________________________
Additix PE
Admixture to make epoxy and polyurethane products thicker with a thixotropic consistency.
Copper Band
Self-adhesive copper strip to make conductive and dissipative surfaces.
Epoxy Speed
Solvent-free accelerator for epoxy primers.
Gravel - Bardiglio Grey (2-4 mm)
Dried bardiglio grey marble aggregate in a special granulometric curve from 2 to 4 mm to make decorative surfaces with good drainage properties. Use in combination with MAPEFLOOR BINDER 930 one-component, aliphatic, polyurethane binder.
138
TECHNICAL DATA: Appearance: powder. Colour: white. Density: 960 kg/m³. Consumption: 1.5-5% by weight on the weight of the resin. Packaging: 1 kg drums.
TECHNICAL DATA: Length: 16.5 metres. Width: 10 millimetres. Packaging: cardboard box containing 20 bags with 1 roll of 16.5 m x 10 mm COPPER BAND per bag.
TECHNICAL DATA: Appearance: liquid. Colour: light yellow. Density: 0.97 g/m³. Viscosity at +23°C: 200 mPa·s. Consumption: 2-3% of the total weight of the epoxy binder used (A+B). Packaging: 5 kg drums.
TECHNICAL DATA: Appearance: dried bardiglio grey marble aggregate in a special granulometric curve from 2 to 4 mm. Colour: bardiglio grey. Storage: 24 months in its original packaging in a dry place. Application: mixed with MAPEFLOOR BINDER 930 one-component aliphatic polyurethane binder. Consumption: 20 kg of 2-4 mm GRAVEL BARDIGLIO GREY per 1 kg of MAPEFLOOR BINDER 930. Packaging: 25 kg bag.
Gravel - Carrara White (2-4 mm)
Dried carrara white marble aggregate in a special granulometric curve from 2 to 4 mm to make decorative surfaces with good drainage properties. Use in combination with MAPEFLOOR BINDER 930 one-component, aliphatic, polyurethane binder.
Gravel - Ebony Black (2-4 mm)
Dried ebony black marble aggregate in a special granulometric curve from 2 to 4 mm to make decorative surfaces with good drainage properties. Use in combination with MAPEFLOOR BINDER 930 one-component, aliphatic, polyurethane binder.
Mapecomfort FL
Rubber matting made from granules of recycled rubber for creating MAPEFLOOR COMFORT SYSTEM AL/X and MAPEFLOOR COMFORT SYSTEM AR/X. Thickness 4 mm.
Mapefibre Glass HP
Alkali-resistant glass fibres for reinforcing cementitious mortar and resin.
TECHNICAL DATA: Appearance: dried carrara white marble aggregate in a special granulometric curve from 2 to 4 mm. Colour: carrara white. Storage: 24 months in its original packaging in a dry place. Application: mixed with MAPEFLOOR BINDER 930 one-component aliphatic polyurethane binder. Consumption: 20 kg of 2-4 mm GRAVEL - CARRARA WHITE per 1 kg of MAPEFLOOR BINDER 930. Packaging: 25 kg bag.
TECHNICAL DATA: Appearance: dried ebony black marble aggregate in a special granulometric curve from 2 to 4 mm. Colour: ebony black. Storage: 24 months in its original packaging in a dry place. Application: mixed with MAPEFLOOR BINDER 930 one-component aliphatic polyurethane binder. Consumption: 20 kg of 2-4 mm GRAVEL - EBONY BLACK per 1 kg of MAPEFLOOR BINDER 930. Packaging: 25 kg bag.
TECHNICAL DATA: Density: 3.0 kg/m². Dynamic stiffness: 66 MN/m². Tensile strength: 470 kPa. Density of the rubber: 750 kg/m³. Elongation at failure: 41%. Packaging: 1 m x 20 m rolls, 4 mm thickness.
TECHNICAL DATA: Diameter of fibre: 14 µm. Length: 6 mm. Consumption: max. 5 kg/m³. Packaging: 18 kg polyethylene bags.
139
11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS
Mapefloor Cleaner ED Detergent for normal degreasing operations of floors.
Mapefloor Filler
Calibrated fillers added to MAPEFLOOR FINISH 50 N, MAPEFLOOR FINISH 52 W, MAPEFLOOR FINISH 53 W/L, MAPEFLOOR FINISH 54 W/S, MAPEFLOOR FINISH 58 W and MAPECOAT I 620 W to form a non-slip finish.
Mapefloor Maintenance Kit
A series of products for cleaning and periodic maintenance of floors to guarantee their performance characteristics and attractive finish.
Mapefloor Wax Remover
De-waxing, multi-action detergent for removing all types of metallic wax including the double-reticulation type, such as MAPELUX LUCIDA or MAPELUX OPACA.
140
TECHNICAL DATA: Appearance: opaque liquid. Colour: green. Solubility in water: soluble. Storage: 24 months in its original sealed packaging. Application: by hand or rendering machine. Packaging: 10 kg tanks.
TECHNICAL DATA: Appearance: crystalline powder. Colour: white. Particle size distribution: – 35% (100 µm residues); – 85% (45 µm residues). Consumption: 5-10 g/m². Packaging: 0.3 kg plastic buckets.
TECHNICAL DATA: Storage: 12 months in their original, sealed packaging at a temperature of between +10°C and +30°C. Protect from frost. Packaging: MAPEFLOOR MAINTENANCE KIT is made up of the following products: – MAPELUX LUCIDA: 1x5 kg; – MAPEFLOOR WAX REMOVER: 1x5 kg; – MAPEFLOOR CLEANER ED: 2x5 kg.
TECHNICAL DATA: Appearance: liquid. Colour: pink. Solubility in water: soluble. Solubility in oil: insoluble. Storage: 12 months in its original sealed packaging. Packaging: 10 kg.
Mapejoint 100/25
Pre-cast composite polymeric joint to be inserted in old, damaged and worn joints, including those with large amounts of movement or subject to intense traffic in industrial settings. Also available in 120 mm length Mapejoint 100/12
Mapelux Lucida
Double-reticulation, high-strength shiny metallic wax.
Mapelux Opaca
Double-reticulating, high-strength matt metallic wax.
PU Catalyst
Accelerator for polyurethane MAPEFLOOR PARKING SYSTEM products.
TECHNICAL DATA: Dimensions: length: 1000 mm, width: 250 mm, thickness: 25 mm. Colour: grey. Maximum width of open joint: 30 mm. Maximum permitted horizontal movement: 15 mm. Compressive strength: 90 N/mm². Flexural strength: 75 N/mm². Packaging: 1000 mm long pieces measuring 250 mm wide by 25 mm thick.
TECHNICAL DATA: Appearance: emulsion. Colour: bluish-white. Application temperature range: from +10°C to +30°C. pH: 8.4 ± 0.2. Storage: 12 months in their original, sealed packaging at a temperature of between +10°C and +30°C. Protect from frost. Application: special wax spreader. Consumption: 50 g/m². Packaging: 10 kg tanks.
TECHNICAL DATA: Appearance: emulsion. Colour: bluish-white. Application temperature range: from +10°C to +30°C. pH: 8.4 ± 0.2. Storage: 12 months in their original, sealed packaging at a temperature of between +10°C and +30°C. Protect from frost. Application: special wax spreader. Consumption: 50 g/m². Packaging: 10 kg drums.
TECHNICAL DATA: Area of use: add PU CATALYST at a rate of 0.5-1.5% of the total weight of polyurethane formulate (A+B) used. Storage: 12 months in a dry place in its original packaging. Consumption: 0.5-1.5% of the total weight of polyurethane formulate (A+B) used. Packaging: 5 kg drums.
141
11. PRODUCTS FOR RESIN AND CEMENTITIOUS FLOORS
Quartz 0.25
Quartz sand used as a “filler” and/or for broadcasting on epoxy and polyurethane systems.
Quartz 0.5
Quartz sand used as a “filler” and/or for broadcasting on epoxy and polyurethane systems.
Quartz 0.9
Quartz sand used as a filler and/or for broadcasting epoxy and polyurethane systems.
Quartz 1.2
Quartz sand used as a “filler” and/or for broadcasting on epoxy and polyurethane systems.
142
TECHNICAL DATA: Colour: greyish white. Maximum size of inerts: 0.25 mm. Packaging: 25 kg bags.
TECHNICAL DATA: Colour: greyish white. Maximum size of inerts: 0.5 mm. Packaging: 25 kg bags.
TECHNICAL DATA: Colour: greyish white. Maximum size of aggregates: 0.9 mm. Packaging: 25 kg bags.
TECHNICAL DATA: Colour: greyish white. Maximum size of inerts: 1.2 mm. Packaging: 25 kg bags.
Quartz 1.9
Mixture of calibrated spherical quartz used as a filler in MAPEFLOOR I 900 or MAPEFLOOR I 910 for preparing mortar with a consistency similar to a mortar screed.
Rete 320
Glass fibre mesh for reinforcing epoxy systems.
TECHNICAL DATA: Colour: light grey. Maximum size of inerts: 1.9 mm. Consumption: recommended ratio for mortar: 8-13 kg of QUARTZ 1.9 per kg of MAPEFLOOR I 900 (A+B). Packaging: 25 kg bags.
TECHNICAL DATA: Weight: 350 g/m². Mesh size: 15.7 x 10.1 mm. Packaging: 50 x 1 m.
143
PRODUCTS FOR REPAIRING ASPHALT AND HIGHWAY MAINTENANCE
12. PRODUCTS FOR REPAIRING ASPHALT AND HIGHWAY MAINTENANCE
Mape-Asphalt Repair 0/8
TECHNICAL DATA: Maximum size of aggregate: 8 mm. Minimum applicable thickness: 20 mm. Maximum applicable thickness: 70 mm. Step-on time: immediate. Application temperature range: from 0°C to +35°C. Storage: 9 months. Application: trowel, spatula, rake or shovel. Consumption: approximately 23 kg/m² per centimetre of thickness. Packaging: 25 kg drums.
One-component, ready-to-use reactive asphalt, applied cold, for repairing holes in roads.
Mapefloor EP 90
Three-component high performance epoxy screed consistency mortar for repairing concrete flooring and forming support layers for beams and joints.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
EN 13813
SR
SYNTHETIC RESINS
B2.0 AR0.5-IR20-BFL-s1
Mapegrout Betontech HPC
Free-flowing, shrinkage compensated cementitious grout with added polymer fibre reinforcement with a workhardening effect for restoring concrete requiring a high level of ductility.
Mapegrout Betontech HPC10
Rheoplastic cementitious mortar with added structural fibre reinforcement with a work-hardening effect for restoring concrete requiring a high level of ductility.
146
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
TECHNICAL DATA: Mixing ratio: comp A : comp. B : comp. C = 1.95 : 0.8 : 24 by weight. Consistency of mix: screed consistency. Pot life of mix: approx. 50 minutes (at +23°C). Minimum applicable thickness: 5 mm. Maximum applicable thickness: 5 cm per layer. Classification: – EN 1504-3 - class R4 structural mortar; – EN 13813 - synthetic resin screed materials. Storage: 24 months. Application: trowel. Consumption: approx. 20 kg/m² per cm of thickness. Packaging: 26.75 kg kit: – 1.95 kg canister (comp. A); – 0.80 kg canister (comp. B); – 24 kg vacuum-packed polyethylene sack (comp. C).
TECHNICAL DATA: Maximum size of aggregate: 6 mm. Mixing ratio: 100 parts of MAPEGROUT BETONTECH HPC with 11.5-12.5 parts of water and 0.25% of MAPECURE SRA. Pot life of mix: approx. 1 hour (at +20°C). Minimum applicable thickness: 3 cm. Maximum applicable thickness: 10 cm. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months. Application: pouring into formwork. Consumption: approx. 20.5 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags and 1,000 kg big-bags.
TECHNICAL DATA: Maximum size of aggregate: 10 mm. Mixing ratio: 100 parts of MAPEGROUT BETONTECH HPC10 with 9.5-10.0 parts of water. Pot life of mix: approx. 1 hour (at +20°C). Minimum applicable thickness: 5 cm. Maximum applicable thickness: 30 cm. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months. Application: pouring into formwork. Consumption: approx. 21 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags and 1,000 kg big-bags.
Mapegrout Hi-Flow TI 20
Hi-flow, compensated-shrinkage, steel fibre-reinforced, high-ductility cementitious mortar.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
ere + Fib r olv
P
ow
rs
e
P
REPAIR MORTAR
d e r + Fi b e
Mapegrout SV
Quick-setting and hardening, compensated-shrinkage hi-flow mortar for repairing concrete and fixing drains, manholes and urban architectural fittings in place.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
Mapegrout SV Fiber
EN 1504-3
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
ere + Fib r olv
rs
P
ow
e
P
Hi-flow, steel fibre-reinforced compensated-shrinkage, quicksetting and hardening, high-ductility cementitious mortar applied at temperatures down to -5°C, with stiff steel fibres for repairing concrete.
d e r + Fi b e
Mapegrout SV T
Quick-setting and hardening, compensated-shrinkage thixotropic mortar for repairing concrete and fixing drains, manholes and urban fittings in place.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT HI-FLOW TI 20 with 14-16 parts of water and 0.25% of MAPECURE SRA. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 5 cm per layer. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months. Application: pouring into formwork. Consumption: approximately 20 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT SV with 12-13 parts of water. Pot life of mix: 15 minutes (at +20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 5 cm per layer. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months. Colour: grey and black. Application: pouring into formwork. Consumption: 20 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT SV FIBER with 13.5-14.5 parts of water. Pot life of mix: approximately 20 minutes (at +20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 5 cm per layer. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months. Application: pouring into formwork. Consumption: approximately 20 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT SV T with 12.5-13.5 parts of water. Pot life of mix: 10 minutes (at +20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 5 cm per layer. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months. Colour: black. Application: gauging trowel or trowel. Consumption: 20 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
147
12. PRODUCTS FOR REPAIRING ASPHALT AND HIGHWAY MAINTENANCE
Primer RM
Two-component fillerized epoxy primer for treating the surface of concrete before applying epoxy mortar.
148
TECHNICAL DATA: Mixing ratio: comp A : comp. B = 60 : 40. Consistency of mix: fluid. Pot life of mix: approx. 30 mins. (at +23°C). Storage: 12 months. Application: spreader, brush or roller. Consumption: approx. 450 g/m² depending on the absorbency of the substrate. Packaging: 2 kg kit: – 1.2 kg tub (comp. A); – 0.8 kg canister (comp. B).
149
PRODUCTS FOR THE RESTORATION OF MASONRY BUILDINGS
13. PRODUCTS FOR THE RESTORATION OF MASONRY BUILDINGS 13.1 Consolidating various types of weak and crumbly substrates (porous stone, brickwork, tuff, installation mortar, render, etc.) by impregnating______________________________________________
Consolidante 8020
Reversible consolidating product in solvent for the conservative restoration and consolidation of porous stone substrates, lime render and layers of paint.
Consolidante ETS
Tetraethyl orthosilicate-based consolidator in solvent for the conservative renovation and consolidation of porous stone, bricks, terracotta and render.
Consolidante ETS WR
Water-repellent, tetraethyl orthosilicatebased consolidator in solvent for the conservative renovation and consolidation of porous stone, bricks, terracotta and render.
Primer 3296
Consolidating and anti-dust acrylic primer in water dispersion.
152
TECHNICAL DATA: Consistency: colourless liquid. Active ingredient: vinyl-versatile copolymers. Density: 0.81 g/cm³. Dry solids content: 3%. Storage: 12 months. Application: brush, roller or spray (low pressure manual spray gun). Consumption: 0.1-1.0 kg/m² (according to the type of substrate, porosity and depth to be consolidated). Packaging: 10 kg metallic drums.
TECHNICAL DATA: Consistency: colourless liquid. Active ingredient: tetraethyl orthosilicate. Density: 0.94-1.010 g/cm³. Storage: 12 months. Application: brush, roller or spray pack or injection with hand or electronic pump. Consumption: 0.1-1.0 kg/m² (depending on type of substrate and depth to be consolidated). Packaging: 10 kg metal drums.
TECHNICAL DATA: Consistency: colourless liquid. Active ingredient: tetraethyl orthosilicate. Density: 0.94-1.010 g/cm³. Storage: 12 months. Application: brush, roller or spray pack or injection with hand or electronic pump. Consumption: 0.1-1.0 kg/m² (depending on type of substrate and depth to be consolidated). Packaging: 10 kg metal drums.
TECHNICAL DATA: Dry solids content: 15%. Storage: 12 months. Application: brush, roller or watering can. Consumption: 0.1-0.5 kg/m² (according to the absorption and porosity of the surface to be treated). Packaging: 5 and 10 kg tanks.
13.2 Reconditioning and consolidating masonry with free-flowing mortar__________________________________
Mape-Antique Colabile
Salt-resistant, hi-flow natural hydraulic lime and ECO-POZZOLAN-based masonry mortar for reconditioning and consolidating masonry.
EN 998-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-2
G-M15 MASONRY MORTAR
TECHNICAL DATA: Maximum size of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPE-ANTIQUE COLABILE with 12 parts water (3 litres of water per 25 kg bag of product) and 0.25% of MAPECURE SRA (one 0.25 kg canister every 4 bags of MAPE-ANTIQUE COLABILE). Porosity of fresh mortar: 7%. Workability time of fresh mortar: approx. 60 mins. Classification: EN 998-2 - type G mortar, category M 15. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: by pouring or pumping. Consumption: 1.83 kg/dm³ (of cavities to be filled). Packaging: 25 kg bags.
13.3 Consolidating masonry and render by injecting slurry______________________________________________
Mape-Antique F21
Super-fluid, salt-resistant, hydraulic binder with fillers made from lime and ECO-POZZOLAN applied by injection for consolidating masonry and render, including the frescoed ones.
Mape-Antique I
Super-fluid, salt-resistant, lime and ECO-POZZOLAN-based, hydraulic binder with fillers applied by injection for consolidating masonry.
Mape-Antique I-15
Salt-resistant, fillerized, lime and ECO-POZZOLAN-based hydraulic binder for making super-fluid injection slurry for consolidating masonry.
TECHNICAL DATA: Maximum diameter of aggregate: 100 µm. Mixing ratio: 100 parts of MAPE-ANTIQUE F21 with approx. 60 parts of water (10.2 l of water for each 17 kg bag of product). Fluidity of the mixture: < 30 sec. Workability time of fresh mortar: approx. 40 minutes. Sulphate resistance: high. Saline efflorescence: absent. Storage: 12 months. Application: injection or by pouring. Consumption: 1.04 kg/dm³ (of cavities to be filled). Packaging: 17 kg bags.
TECHNICAL DATA: Maximum diameter of aggregate: 100 µm. Mixing ratio: 100 parts of MAPE-ANTIQUE I with 35 parts of water (7 l of water for each 20 kg bag of product). Fluidity of the mixture: < 30 sec. Workability time of fresh mortar: 60 minutes. Sulphate resistance: high. Saline efflorescence: absent. Storage: 12 months. Application: injection or by pouring. Consumption: approx. 1.40 kg/dm³ (of cavities to be filled). Packaging: 20 kg bags.
TECHNICAL DATA: Maximum size of aggregate: 100 µm. Mixing ratio: 100 parts of MAPE-ANTIQUE I-15 with 30 parts water (6 litres of water per 25 kg bag of product). Fluidity of mix: < 30 sec. Workability time of fresh mortar: approx. 60 mins. Compressive strength after 28 days: 15 N/mm². Resistance to sulphates: high. Saline efflorescence: absent. Application: injection or pouring. Consumption: approx. 1.50 kg/dm³ (of cavities to be filled). Packaging: 20 kg bags.
153
13. PRODUCTS FOR THE RESTORATION OF MASONRY BUILDINGS
MapeWall Inject & Consolidate
Reactive natural hydraulic limebased inorganic binder with very low emission of VOC used to make superfluid injection slurry for consolidating masonry.
EN 998-2
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-2
G-M15 MASONRY MORTAR
TECHNICAL DATA: Maximum size of aggregate: 100 µm. Mixing ratio: 100 parts of MAPEWALL INJECT & CONSOLIDATE with 29-30 parts of water (5.8-6.0 litres of water per 20 kg bag of product). Fluidity of mix: < 40 sec. Workability time of fresh mortar: approx. 60 mins. Classification: EN 998-2 - type G mortar, class M15. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: injection or pouring. Consumption: approx. 1.50 kg/dm³ (of cavities to be filled). Packaging: 20 kg bags.
13.4 Horizontal chemical barriers against capillary rising damp ___________________________________________
Mapestop
Agent applied by injection made from micro-emulsion, concentrated silane and siloxane used to form a chemical barrier against capillary rising damp in masonry.
Mapestop Cream
Monomeric silane-based creamy emulsion for creating chemical barriers against capillary rising damp.
Mapestop Cream Tool 280
MAPESTOP CREAM injection tube to be used with manual extrusion guns for 280 ml cartridges.
154
TECHNICAL DATA: Dimension of particles: 20-60 µm. Mixing ratio in water: 1 : 15-19. Silane/siloxane content: 100%. Duration of solution: 24 hours. Storage: 12 months. Application: by gravity or suitable injection pump. Consumption: according to the absorption of the masonry. Approximately 8-9 kg/m of solution for a 40 cm thick wall, corresponding to 0.4-0.6 kg of neat MAPESTOP. Packaging: 1 and 10 kg metal can with spout.
TECHNICAL DATA: Consistency: creamy paste. Colour: white. Density: 0.98 g/cm³. Storage: 12 months. Application: sealant gun for 280 ml cartridge and 600 ml sausage gun such as MAPEI GUN 600 PRO. Consumption: according to type and thickness of masonry. Approx. 10 ml per metre per cm of thickness of masonry for 12 mm diam. holes. Packaging: box of 12 x 280 ml cartridges. Box of 10 x 600 ml sausages with one injection tool included.
TECHNICAL DATA: Packaging: 12 pcs box. To be used with Mapei products: MAPESTOP CREAM (280 ml cartridges).
Mapestop Cream Tool 600
TECHNICAL DATA: Packaging: 4 pcs bag. To be used with Mapei products: MAPESTOP CREAM (600 ml sausages) and MAPEI GUN 600 PRO.
MAPESTOP CREAM injection tube to be used with manual extrusion guns for 600 ml sausages.
Mapestop Injectors
TECHNICAL DATA: Packaging: cardboard box containing 8 of each of the following items: – Ø 12 mm injectors; – 50 cm long diffusing tube (outside diameter 12 mm); – sealing plug.
Spare parts kit for MAPESTOP KIT DIFFUSION.
Mapestop Kit Diffusion
TECHNICAL DATA: Packaging: cardboard box containing 8 of of each of the following items: – 1.5 litre diffuser in PE HD; – galvanized support bracket; – 100 cm long PVC tube (outside diameter 7 mm); – Ø 12 mm injector; – 50 cm long diffusing tube (outside diameter 11 mm); – sealing plug.
Complete kit to create a slow-diffusion chemical barrier against capillary rising damp.
13.5 De-humidifying masonry with binders and mortars for render_______________________________________
Mape-Antique CC
Macro-porous, salt-resistant dehumidifying render made from lime and ECO-POZZOLAN cement-free, for repairing old masonry, including on buildings of historical interest.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
R-CS II RENDERING AND PLASTERING MORTAR
TECHNICAL DATA: Maximum diameter of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPE-ANTIQUE CC with 14-16 parts of water (3.5-4 l of water for each 25 kg bag of product). Porosity of the mix while still fresh: > 20%. Coefficient of permeability to water vapour: ≤ 10 µ. Workability time of fresh mortar approx. 1 hour. Minimum applicable thickness: 20 mm. Maximum applicable thickness per layer: 30 mm. Classification: EN 998-1 - type R mortar, category CS II. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Colour: light pink. Application: gauging trowel. Consumption: 15 kg/m² (per cm of thickness). Packaging: 25 kg bags.
155
13. PRODUCTS FOR THE RESTORATION OF MASONRY BUILDINGS
Mape-Antique Eco Rinzaffo
Salt-resistant, breathable, natural hydraulic lime and ECO-POZZOLAN cement-free, scratch-coat mortar used as a base layer before applying de-humidifying, breathable and structural render.
Mape-Antique Eco Risana
Macro-porous, natural hydraulic lime and ECO-POZZOLAN cement-free, dehumidifying rendering mortar for renovating old masonry, including buildings of historical interest with rising damp.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
R-CS II RENDERING AND PLASTERING MORTAR
Mape-Antique LC
Mape-Antique MC
EN 998-1
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
R-CS II RENDERING AND PLASTERING MORTAR
156
TECHNICAL DATA: Maximum size of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPE-ANTIQUE ECO RISANA with 21-23 parts of water (5.25-5.75 litres of water per 25 kg bag of product). Porosity of wet mortar: > 20%. Water vapour permeability coefficient: ≤ 10 μ. Workability time of fresh mortar: approx. 60 minutes. Minimum applicable thickness: 20 mm. Maximum applicable thickness per layer: 30 mm. Classification: EN 998-1 - type R mortar, category CS II. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: by trowel or with a continuous-feed rendering machine. Consumption: 14 kg/m² (per cm of thickness). Packaging: 25 kg bags.
TECHNICAL DATA: Mixing ratio: – 0.5-2.5 mm sand: 500 kg/m³ of MAPE-ANTIQUE LC with 1,000 kg/m³ of sand and 225 l/m³ of water; – 0.5-5 mm sand: 450 kg/m³ of MAPE-ANTIQUE LC with 1,150 kg/m³ of gravel and 210 l/m³ of water; – 0-8 mm sand: 400 kg/m³ of MAPE-ANTIQUE LC with 1,300 kg/m³ of gravel and 200 l/m³ of water; Storage: 12 months. Application: gauging trowel or by pouring. Consumption: approximate (per cm of thickness): – 5.0 kg/m² with fine sand (0.5-2.5 mm); – 4.5 kg/m² with coarse sand (0.5-5 mm); – 4.0 kg/m² with gravel (0-8 mm). Packaging: 20 kg bags.
Salt-resistant, lime and ECO-POZZOLAN cement-free, hydraulic binder mixed with aggregates in various grain sizes to make de-humidifying render and masonry mortar.
Macro-porous, salt-resistant dehumidifying render made from lime and ECO-POZZOLAN cement-free, for repairing old masonry, including on buildings of historical interest.
TECHNICAL DATA: Maximum size of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPE-ANTIQUE ECO RINZAFFO with 21-23 parts of water (4.20-4.65 litres of water per 20 kg bag of product). Porosity of wet mortar: > 5%. Water vapour permeability coefficient: ≤ 30 μ. Workability time of fresh mortar: approx. 60 minutes. Thickness applied: 5 mm. Classification: EN 998-1 - type GP mortar, category CS IV. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: by trowel or with a continuous-feed rendering machine. Consumption: 8 kg/m² (5 mm thick layer). Packaging: 20 kg bags.
TECHNICAL DATA: Maximum diameter of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPE-ANTIQUE MC with 14-16 parts of water (3.5-4 l of water for each 25 kg bag of product). Porosity of the mix while still fresh: > 20%. Coefficient of permeability to water vapour: ≤ 10 µ. Workability time of fresh mortar approx. 60 minutes. Minimum applicable thickness: 20 mm. Maximum applicable thickness per layer: 30 mm. Classification: EN 998-1 - type R mortar, category CS II. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Colour: white. Application: gauging trowel. Consumption: 15 kg/m² (per cm of thickness). Packaging: 25 kg bags.
Mape-Antique MC Macchina
Macro-porous, salt-resistant dehumidifying, lime and ECO-POZZOLAN cement-free, based render for repairing existing masonry, including on buildings of historical interest.
EN 998-1
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
R-CS II RENDERING AND PLASTERING MORTAR
Mape-Antique Rinzaffo Salt-resistant, breathable, lime and ECO-POZZOLAN cement-free, scratchcoat mortar applied as a base layer for de-humidifying, breathable and “structural” render.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
PoroMap Deumidificante
Salt-resistant dehumidifying render for renovating masonry with rising damp.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
R-CS II RENDERING AND PLASTERING MORTAR
PoroMap Rinzaffo Plus
Salt-resistant, breathable, scratch-coat mortar, based on hydraulic pozzolanic reaction binder, to be used as first layer to improve the bond of the render and even out the absorption of the substrate.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
TECHNICAL DATA: Maximum size of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPE-ANTIQUE MC MACCHINA with 19-21 parts of water (4.75-5.25 litres of water per 25 kg bag of product). Porosity of the mortar while still fresh: >20%. Coefficient of permeability to water vapour: ≤ 10 μ. Workability time of fresh mortar: approx. 60 min. Minimum applicable thickness: 20 mm. Maximum applicable thickness per layer: 30 mm. Classification: EN 998-1 - type R mortar, category CS II. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Colours: white. Application: continuous-mixing rendering machine. Consumption: 16 kg/m² (per cm of thickness). Packaging: 25 kg bags.
TECHNICAL DATA: Maximum diameter of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPE-ANTIQUE RINZAFFO with 25-27.5 parts of water (5-5.5 l of water for each 20 kg bag of product). Porosity of the mix while still fresh: 6%. Coefficient of permeability to water vapour: ≤ 30 µ. Workability time of fresh mortar approx. 1 hour. Maximum applicable thickness: 5 mm. Classification: EN 998-1 - type GP mortar, category CS IV. Storage: 12 months. Application: continuous-mixing rendering machine or gauging trowel. Consumption: 7.5 kg/m² (for a 5 mm thick layer). Packaging: 20 kg bags.
TECHNICAL DATA: Maximum size of aggregate: 2.5 mm. Mixing ratio: 100 parts of POROMAP DEUMIDIFICANTE with 22-24 parts of water (4.4-4.8 litres of water per 20 kg bag of product). Porosity of wet mortar: >20%. Water vapour permeability coefficient: <10 µ. Workability time of fresh mortar: approx. 60 minutes. Minimum applicable thickness: 20 mm. Maximum applicable thickness per layer: 30 mm. Classification: EN 998-1 - type R mortar, class CSII. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: by trowel or with a continuous-feed rendering machine. Consumption: 11-12 kg/m² (per cm of thickness). Packaging: 20 kg bags.
TECHNICAL DATA: Maximum size of aggregate: 2.5 mm. Mixing ratio: 100 parts of POROMAP RINZAFFO PLUS with 19- 21 parts of water (4.75-5.25 l of water for each 25 kg bag). Coefficient of permeability to water vapour: < 20 µ. Workability time of wet mortar: approx. 60 minutes. Thickness to be applied: 5 mm. Classification: EN 998-1 - GP type mortar CS IV class. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: trowel or continuous feed rendering machine. Consumption: 7.5-8 kg/m² (per 5 mm of thickness). Packaging: 25 kg bag.
157
13. PRODUCTS FOR THE RESTORATION OF MASONRY BUILDINGS 13.6 Lime based breathable renders_________________________________________________________________
Mape-Antique Intonaco NHL
Breathable base render made from natural hydraulic lime and ECO-POZZOLAN, cement-free, for application on existing masonry work, including those of historical interest, and on new constructions.
MapeWall Intonaco Base
Breathable natural hydraulic lime-based base render for external and internal use; to be applied by trowel or with a rendering machine.
EN 998-1
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS II RENDERING AND PLASTERING MORTAR
EN 998-1
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS II RENDERING AND PLASTERING MORTAR
TECHNICAL DATA: Maximum diameter of aggregate: 1.4 mm. Mixing ratio: 100 parts of MAPE-ANTIQUE INTONACO NHL with 19-21 parts of water (4.75-5.25 l of water for each 25 kg bag of product). Porosity of the mortar while still fresh: 20%. Coefficient of permeability to water vapour: ≤ 12 µ. Workability time of fresh mortar: approx. 60 minutes. Minimum applicable thickness: 10 mm. Maximum applicable thickness per layer: 30 mm. Classification: EN 998-1 - type GP mortar, category CS II. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: continuous-mixing rendering machine or gauging trowel. Consumption: approx. 14.5 kg/m² (per cm of thickness). Packaging: 25 kg bags.
TECHNICAL DATA: Maximum size of aggregate (EN 1015-1): 1.4 mm. Mixing ratio: 100 parts of MAPEWALL INTONACO BASE with 19-21 parts of water (4.8-5.2 litres of water per 25 kg bag of product). Coefficient of permeability to water vapour: ≤ 12 µ. Workability time of wet mortar (EN 1015-9): approx. 60 min. Minimum applicable thickness: 10 mm. Maximum applicable thickness per layer: 20 mm. Classification: EN 998-1 - type GP mortar, category CS II. EMICODE: EC1 Plus - very low emission. Storage: 12 moths. Application: with a continuous-mixing rendering machine or by trowel. Consumption: 15 kg/dm² (per cm of thickness). Packaging: 25 kg bags.
13.7 Structural even “reinforced” renders _________________________________________________________
Mape-Antique Strutturale NHL
High-performance breathable mortar for render and masonry work made from natural hydraulic lime and ECO-POZZOLAN, cement-free, particularly suitable for making “reinforced” and installation mortar.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
EN 998-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-2
G-M15 MASONRY MORTAR
MapeWall Render & Strengthen
High strength natural hydraulic lime-based breathable rendering and masonry mortar with very low emission of VOC for making structural render, “reinforced” structural render and installation mortar.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
EN 998-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-2
G-M15 MASONRY MORTAR
158
TECHNICAL DATA: Maximum diameter of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPE-ANTIQUE STRUTTURALE NHL with 16-17 parts of water (4-4.25 l of water for each 25 kg bag of product). Porosity of the mortar while still fresh: 7%. Coefficient of permeability to water vapour: 60 µ. Workability time of fresh mortar: approx. 60 minutes. Minimum applicable thickness: 10 mm. Maximum applicable thickness per layer: 40 mm. Classification: – EN 998-1 - type GP mortar, category CS IV; – EN 998-2 - type G mortar, class M 15. Storage: 12 months. Application: continuous-mixing rendering machine or gauging trowel. Consumption: approx. 17 kg/m² (per cm of thickness). Packaging: 25 kg bags.
TECHNICAL DATA: Maximum size of aggregate: 2.5 mm Mixing ratio: 100 parts of MAPEWALL RENDER & STRENGTHEN with 16-18 parts of water (4.0-5.0 litres of water per 25 kg bag of product). Porosity of fresh mortar: 16%. Water vapour permeability coefficient: 20 µ. Workability time of fresh mortar: approx. 60 mins. Minimum applicable thickness: 10 mm. Maximum applicable thickness per layer: 30 mm. Classification: – EN 998-1 - type GP mortar, category CS IV; – EN 998-2 - type G mortar, class M15. Storage: 12 months. Colour: hazel, beige and grey. Application: by trowel or with a continuous-mixing rendering machine. Consumption: approx. 16 kg/m² (per cm of thickness). Packaging: 25 kg bags.
13.8 Skimming of de-humidifying breathable and structural mortars____________________________________
Mape-Antique Eco Rasante Civile
Fine-textured, breathable, natural hydraulic lime cement-free, skimming mortar for a natural finish on render.
TECHNICAL DATA: EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS II RENDERING AND PLASTERING MORTAR
Mape-Antique Eco Rasante Grosso
Coarse-textured, breathable, natural hydraulic lime cement-free, skimming mortar for a coarse-textured finish on render.
Mape-Antique FC Civile
Salt-resistant, fine-grained lime and ECO-POZZOLAN cement-free, breathable skimming mortar for a natural finish on render.
Mape-Antique FC Grosso
Salt-resistant, large-grained lime and ECO-POZZOLAN cement-free, breathable skimming mortar for a rough finish on render.
Maximum size of aggregate: 400 μm. Mixing ratio: 100 parts of MAPE-ANTIQUE ECO RASANTE CIVILE with 22-24 parts of water (5.5-6 litres of water per 25 kg bag of product). Workability time of fresh mortar: approx. 60 mins. Maximum applicable thickness per layer: 2 mm. Classification: EN 998-1 - type GP mortar, category CS II. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: flat metal trowel. Consumption: 1.40 kg/m² (per mm of thickness). Packaging: 25 kg bags.
TECHNICAL DATA: EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS II RENDERING AND PLASTERING MORTAR
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
Maximum size of aggregate: 700 μm. Mixing ratio: 100 parts of MAPE-ANTIQUE ECO RASANTE GROSSO with 22-24 parts of water (5.5-6 litres of water per 25 kg bag of product). Workability time of fresh mortar: approx. 60 mins. Maximum applicable thickness per layer: 3 mm. Classification: EN 998-1 - type GP mortar, category CS II. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: flat metal trowel. Consumption: 1.40 kg/m² (per mm of thickness). Packaging: 25 kg bags.
TECHNICAL DATA: Maximum size of aggregate: 400 µm. Mixing ratio: 100 parts of MAPE-ANTIQUE FC with 24-26 parts of water (6-6.5 l of water for each 25 kg bag of product). Workability time of fresh mortar: approx. 60 min. Maximum applicable thickness per layer: 2 mm. Classification: EN 998-1 - GP type mortar, category CS IV. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Colour: white or light pink. Application: flat metal trowel. Consumption: approx. 1.4 kg/m² (per mm of thickness). Packaging: 25 kg bags.
TECHNICAL DATA: Maximum size of aggregate: 700 µm. Mixing ratio: 100 parts of MAPE-ANTIQUE FC GROSSO with 18-20 parts of water (4.5-5 l of water for each 25 kg bag of product). Workability time of fresh mortar: approx. 60 min. Maximum applicable thickness per layer: 3 mm. Classification: EN 998-1 - GP type mortar, category CS IV. EMICODE: EC1 - very low emission. Storage: 12 months. Application: flat metal trowel. Consumption: approx. 1.4 kg/m² (per mm of thickness). Packaging: 25 kg bags.
159
13. PRODUCTS FOR THE RESTORATION OF MASONRY BUILDINGS
Mape-Antique FC Ultrafine
Salt-resistant, ultra fine-grained lime and ECO-POZZOLAN cement-free, breathable skimming mortar for a smooth finish on render.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS II RENDERING AND PLASTERING MORTAR
PoroMap Finitura
Cement-free, light-coloured fine mortar for finishing de-humidifying renders applied on stone, brick and tuff masonry.
EN 998-1
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
TECHNICAL DATA: Maximum size of aggregate: < 100 µm. Mixing ratio: 100 parts of MAPE-ANTIQUE FC ULTRAFINE with 30-32 parts of water (6-6.4 l of water for each 20 kg bag of product). Workability time of fresh mortar: approx. 60 min. Maximum applicable thickness per layer: 1 mm. Classification: EN 998-1 - GP type mortar, category CS II. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: flat metal trowel. Consumption: approx. 1.3 kg/m² (per mm of thickness). Packaging: 20 kg bags.
TECHNICAL DATA: Maximum diameter of aggregate: 300 µm. Mixing ratio: 100 parts of POROMAP FINITURA with 24-26 parts of water. Workability time of mortar: approx. 60 min. Maximum applicable thickness per layer: 2 mm. Classification: EN 998-1 - type GP mortar, category CS IV. Storage: 12 months. Application: smooth metal trowel. Consumption: 1.4 kg/m² (per mm of thickness). Packaging: 25 kg bags.
13.9 Brick, stone, tuff and mixed masonries________________________________________________________
Mape-Antique Allettamento
Salt-resistant masonry mortar, made from natural hydraulic lime and ECO-POZZOLAN, cement-free, for installation layers and pointing on “natural finish” masonry.
Mape-Antique Strutturale NHL
High-performance breathable mortar for render and masonry work made from natural hydraulic lime and ECO-POZZOLAN, cement-free, particularly suitable for making “reinforced” and installation mortar.
EN 998-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-2
G-M5 MASONRY MORTAR
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
EN 998-2
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-2
G-M15 MASONRY MORTAR
160
TECHNICAL DATA: Maximum size of aggregate: 1.5 mm. Mixing ratio: 100 parts of MAPE-ANTIQUE ALLETTAMENTO with 18-20 parts of water (4.5-5 l of water for each 25 kg bag of product). Porosity of the mortar while still fresh: 6%. Coefficient of permeability to water vapour: µ 15/35. Workability time of fresh mortar: approx. 60 min. Minimum applicable thickness: 5 mm. Maximum applicable thickness per layer: 30 mm. Classification: EN 998-2 - G type mortar, class M 5. Storage: 12 months. Colour: available in 7 colours. Application: gauging trowel. Consumption: 16.5 kg/m² (per cm of thickness). Packaging: 25 kg bags.
TECHNICAL DATA: Maximum diameter of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPE-ANTIQUE STRUTTURALE NHL with 16-17 parts of water (4-4.25 l of water for each 25 kg bag of product). Porosity of the mortar while still fresh: 7%. Coefficient of permeability to water vapour: 60 µ. Workability time of fresh mortar: approx. 60 minutes. Minimum applicable thickness: 10 mm. Maximum applicable thickness per layer: 40 mm. Classification: – EN 998-1 - type GP mortar, category CS IV; – EN 998-2 - type G mortar, class M 15. Storage: 12 months. Application: continuous-mixing rendering machine or gauging trowel. Consumption: approx. 17 kg/m² (per cm of thickness). Packaging: 25 kg bags.
MapeWall Muratura Fine
High strength, breathable, natural hydraulic lime-based masonry mortar with very low emission level of VOC for general building work, reinforced masonry and patching and plumbing walls.
MapeWall Muratura Grosso
High strength, breathable, natural hydraulic lime-based masonry mortar with very low emission of VOC for general building and “reinforced” masonry work and patching and plumbing walls
MapeWall Render & Strengthen
High strength natural hydraulic lime-based breathable rendering and masonry mortar with very low emission of VOC for making structural render, “reinforced” structural render and installation mortar.
EN 998-2
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-2
G-M10 MASONRY MORTAR
EN 998-2
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-2
G-M5 MASONRY MORTAR
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
EN 998-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-2
G-M15 MASONRY MORTAR
TECHNICAL DATA: Maximum size of aggregate (EN 1015-1) (mm): 1.5 mm. Mixing ratio: 100 parts of MAPEWALL MURATURA FINE with 16-18 parts of water (4.0-4.5 litres of water per 25 kg bag). Coefficient of permeability to water vapour: 15/35 µ. Workability time of wet mortar (EN 1015-9): approx. 60 minutes. Minimum applicable thickness (mm): 5 mm. Maximum applicable thickness (mm): 30 mm. Classification: EN 998-2 - G type mortar, class M10. Storage: 12 months. Colour: available in 7 colours. Application: gauging trowel. Consumption: 1.65 kg/dm³ (of cavity to be filled). Packaging: 25 kg bags.
TECHNICAL DATA: Maximum size of aggregate: 3 mm. Mixing ratio: 100 parts of MAPEWALL MURATURA GROSSO with 15.5-17.5 parts of water (3.9-4.4 litres of water per 25 kg bag of product). Water vapour permeability coefficient: 15/35 µ. Workability time of fresh mortar: approx. 60 mins. Minimum applicable thickness: 10 mm. Maximum applicable thickness per layer: 40 mm. Classification: EN 998-2 - type G mortar, class M 5. Storage: 12 months. Application: trowel. Consumption: 1.70 kg/dm³ (of cavities to be filled). Packaging: 25 kg bags.
TECHNICAL DATA: Maximum size of aggregate: 2.5 mm Mixing ratio: 100 parts of MAPEWALL RENDER & STRENGTHEN with 16-18 parts of water (4.0-5.0 litres of water per 25 kg bag of product). Porosity of fresh mortar: 16%. Water vapour permeability coefficient: 20 µ. Workability time of fresh mortar: approx. 60 mins. Minimum applicable thickness: 10 mm. Maximum applicable thickness per layer: 30 mm. Classification: – EN 998-1 - type GP mortar, category CS IV; – EN 998-2 - type G mortar, class M15. Storage: 12 months. Colour: hazel, beige and grey. Application: by trowel or with a continuous-mixing rendering machine. Consumption: approx. 16 kg/m² (per cm of thickness). Packaging: 25 kg bags.
13.10 Waterproofing and protecting construction features ___________________________________________
Mape-Antique Ecolastic
Two-component, elastic, salt-resistant, cement-free, lime and ECO-POZZOLAN based coating for waterproofing and protecting construction features, including in listed buildings
EN 14891 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 14891
CMO1P LIQUID-APPLIED WATER IMPERMEABLE PRODUCTS
EN 15824 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C)
EN 15824
PRINCIPLES
PI-MC-IR
V3-W3
SURFACE PROTECTION SYSTEMS FOR CONCRETE
EXTERNAL AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS
TECHNICAL DATA: Consistency: plastic Mixing ratio: comp A: comp. B = 2 : 1. Workability time of mix: approx. 1 hour (at +20°C). Application temperature: +5°C to +40°C. Classification: – EN 14891: “Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives” according to principles CM, O1 and P; – EN 15824 - Specifications for external renders and internal plasters based on organic binders”; – EN 1504-2 - Products and systems for the protection of concrete surfaces according to principles PI, MC and IR. Storage: 12 months component A, 24 months component B. Application: brush, roller, spreader or rendering machine with a skim-coat lance. Consumption: – by roller: 1.65 kg/m² per mm of thickness; – by spray: 2.2 kg/m² per mm of thickness. Packaging: 15 kg kit: – component A: 10 kg bags; – component B: 5 kg tanks.
161
REPAIRING, CONSOLIDATING AND STRENGTHENING WOODEN STRUCTURES
14. REPAIRING, CONSOLIDATING AND STRENGTHENING WOODEN STRUCTURES
Mapewood Gel 120
Gel epoxy adhesive for restoring wooden structural elements.
Mapewood Paste 140
Thixotropic epoxy adhesive for restoring wooden structural elements.
Mapewood Primer 100
Fluid epoxy impregnator in water dispersion for consolidating and priming wooden structures.
164
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Workability time: 40’. Setting time: 50’. Final hardening time: 7 days. Storage: 24 months. Application: pouring or injection. Consumption: 1.01 kg/dm³ (of cavities to be filled). Packaging: 2.5 kg units (comp. A = 2 kg and comp. B = 0.5 kg).
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 2 : 1. Workability time: 1 hour. Setting time: 4-5 hours. Final hardening time: 7 days. Storage: 24 months. Application: metal trowel. Consumption: 1.59 kg/dm³ (of cavities to be filled). Packaging: 3 kg units (comp. A = 2 kg and comp. B = 1 kg).
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 1 : 1. Workability time: 30-40 minutes. Final hardening time: 12-24 hours. Storage: 24 months. Application: roller, brush or pipe cleaner. Consumption: approx. 150 g/m². Packaging: 1 kg units (comp. A = 0.5 kg and comp. B = 0.5 kg).
165
ADHESIVES AND SMOOTHING COMPOUNDS FOR CELLULAR CONCRETE BLOCKS
15. ADHESIVES AND SMOOTHING COMPOUNDS FOR CELLULAR CONCRETE BLOCKS
Porocol
Cementitious adhesive mortar for expanded block masonry.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CSIII RENDERING AND PLASTERING MORTAR
EN 998-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-2
T-M5
TECHNICAL DATA: Maximum diameter of aggregate: 1 mm. Mixing ratio: 100 parts of POROCOL with 23-25 parts of water. Pot life of mix: approximately 2-3 hours. Minimum applicable thickness: 1 mm. Maximum applicable thickness: 1.5 cm per layer. Classification: – EN 998-1 - type GP mortar, category CS III; – EN 998-2 - type T mortar, class M5. Storage: 12 months. Application: notched or smooth trowel. Consumption: – as adhesive for flat block walls: 5-7 kg/m²; – as skimming layer for flat block walls: 1.4 kg/m² per mm of thickness. Packaging: 25 kg bags.
MASONRY MORTAR
Porocol FF
One-component, fine-grained, white cementitious mortar for laying cellularconcrete blocks and for smoothing over the surface in layers of up to 10 mm thick. Fire resistance class according to EN 1364-1 EI 240 - E 120.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CSIII RENDERING AND PLASTERING MORTAR
EN 998-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-2
T-M5 MASONRY MORTAR
168
TECHNICAL DATA: Maximum diameter of aggregate: 1 mm. Mixing ratio: 100 parts of POROCOL FF with 27-29 parts of water. Pot life of mix: approximately 2-3 hours. Minimum applicable thickness: 1 mm. Maximum applicable thickness: 1 cm per layer. Classification: – EN 998-1 - type GP mortar, category CS III; – EN 998-2 - type T mortar, class M5. Storage: 12 months. Application: notched or smooth trowel. Consumption: – as adhesive for flat block walls: 2-4 kg/m²; – as skimming layer for flat block walls: 1.2 kg/m² per mm of thickness. Packaging: 25 kg bags.
169
PRODUCTS FOR THE RESTORATION OF CONCRETE
16. PRODUCTS FOR THE RESTORATION OF CONCRETE 16.1 Protection of steel reinforcement rods___________________________________________________________
Mapefer
Two-component, anti-corrosion cementitious mortar for steel reinforcement rods.
EN 1504-7 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-7 REINFORCEMENT CORROSION PROTECTION
Mapefer 1K
One-component, anti-corrosion cementitious mortar for steel reinforcement rods.
EN 1504-7 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-7 REINFORCEMENT CORROSION PROTECTION
Mapeshield E 25
Adhesive zinc plates applied directly on the surface of structures for galvanic cathodic protection against the corrosion of steel reinforcement rods.
Mapeshield I
Pure zinc anodes coated with a special conductive paste, for galvanic cathodic protection against corrosion of steel reinforcement in new structures and in structures requiring repair.
172
TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 2 mm. Waiting time between each coat: approximately 2 hours. Waiting time before applying mortar: 6-24 hours. Classification: EN 1504-7. Storage: 12 months. Application: brush in two coats. Consumption: 120 g/m for 8 mm diameter rebar (2 mm of product applied). Packaging: 2 kg kits: – 1.5 kg sachets (comp. A); – 0.5 kg bottles (comp. B).
TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of water. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 2 mm. Waiting time between each coat: approximately 2 hours. Waiting time before applying mortar: 6-24 hours. Classification: EN 1504-7. Storage: 24 months. Application: brush in two coats. Consumption: 100 g/m for 8 mm diameter rebar (2 mm of product applied). Packaging: boxes of 4x5 kg sachets.
TECHNICAL DATA: Thickness of plate: 0.25 mm. Height: 25 cm. Weight: 3.15 kg/m² ± 5%. Storage: 12 months. Application: external surfaces of concrete. Consumption: according to the density of steel reinforcement. Packaging: wooden boxes with 1 25 m x 25 cm wide rolls.
TECHNICAL DATA: Mapeshield I 10 10/10 10/20 External surface: 100 x 50 mm ± 10% 100 x 50 mm ± 10% Height: 12 mm ± 10% 15 mm ± 10% Weight: 230 g ± 10% 320 g ± 10% Storage: 12 months. Application: directly on steel reinforcement. Consumption: according to the density of steel reinforcement. Packaging: boxes of 24 pieces. Mapeshield I 30 30/10 30/20 External surface: 300 x 50 mm ± 5% 300 x 50 mm ± 5% Height: 10 mm ± 10% 12 mm ± 10% Weight: 450 g ± 10% 570 g ± 10% Storage: 12 months. Application: directly on steel reinforcement. Consumption: according to the density of steel reinforcement. Packaging: boxes of 12 pieces.
16.2 Repairs to concrete with compensated-shrinkage mortar and binders ___________________________________
Gravel 0-8
Aggregate with an assorted grain size for cementitious mortar, particularly suitable as a “filler” for STABILCEM.
EN 12620
TECHNICAL DATA: Size of aggregate: assorted grain size from 0 to 8 mm. Application: added as an aggregate. Packaging: 20 kg bags.
EN 13139
Gravel 0-15
Aggregate with an assorted grain size for cementitious mortar, particularly suitable as a “filler” for STABILCEM.
EN 12620
TECHNICAL DATA: Size of aggregate: assorted grain size from 0 to 15 mm. Application: added as an aggregate. Packaging: 25 kg bags.
EN 12620
TECHNICAL DATA: Size of aggregate: assorted grain size from 3 to 5 mm. Application: added as an aggregate. Packaging: 25 kg bags.
Gravel 3-5
Aggregate with an assorted grain size mixed with repair mortar from the MAPEGROUT range.
EN 13139
Gravel 6-10
Aggregate with an assorted grain size mixed with repair mortar from the MAPEGROUT HI-FLOW and MAPEGROUT SV ranges or with expansive mortar, such as MAPEFILL.
EN 12620
TECHNICAL DATA: Size of aggregate: assorted grain size from 6 to 10 mm. Application: added as an aggregate. Packaging: 25 kg bags.
173
16. PRODUCTS FOR THE RESTORATION OF CONCRETE
Mapecure SRA
TECHNICAL DATA: Consistency: liquid. Storage: 12 months. Consumption: – mortar: 0.25% by weight of pre-blended mix; – concrete and beton: 5-8 l/m³. Packaging: 20 kg tanks.
Curing admixture for cementitious mortar and concrete to reduce hydraulic shrinkage and the formation of micro-cracks.
Mapefill MF 610
Expansive mortar for precision anchoring in thick layers.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
EN 1504-6 IN COMPLIANCE WITH EUROPEAN STANDARD
TECHNICAL DATA: Maximum size of aggregate: ≤ 10 mm. Mixing ratio: 100 parts of MAPEFILL MF 610 with 9.5-10.5 parts of water and 0.16-0.32% of MAPECURE SRA. Pot life of mix: approx. 2 hours (at +20°C). Minimum applicable thickness: 5 cm. Maximum applicable thickness: 10 cm. Classification: – EN 1504-3 - class R4 structural mortar; – EN 1504-6. Storage: 12 months. Application: pouring. Consumption: approx. 21 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags and 1,000 kg big-bags.
EN 1504-6 ANCHORING STEEL REINFORCEMENT BARS
Mapegrout 430
Fine-grained, fibre-reinforced, normalsetting thixotropic mortar for repairing concrete.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R3
REPAIR MORTAR
Mapegrout Anchor & Repair
Fibre-reinforced, compensatedshrinkage, mortar for repairing concrete and anchoring metal structures.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
EN 1504-6 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-6 ANCHORING STEEL REINFORCEMENT BARS
174
TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of MAPEGROUT 430 with 17.5-18.5 parts of water. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 5 mm. Maximum applicable thickness: 3.5 cm per layer. Classification: EN 1504-3 - class R3 structural mortar. Storage: 12 months. Application: trowel, gauging trowel or rendering machine, including the continuous-mixing type. Consumption: 17 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
TECHNICAL DATA: Maximum size of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT ANCHOR & REPAIR with 13-14.5 parts of water and 0.25% of MAPECURE SRA. Pot life of mix: approx. 1 h. Minimum thickness: 1 cm. Maximum thickness: approx. 5 cm. Classification: EN 1504-3 3 (R4 class structural mortar), EN 1504-6. Storage: 12 months. Colour: grey. Application: pouring into formworks. Consumption: approx. 21 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
Mapegrout Betontech HPC
Free-flowing, shrinkage compensated cementitious grout with added polymer fibre reinforcement with a workhardening effect for restoring concrete requiring a high level of ductility.
Mapegrout Betontech HPC10
Rheoplastic cementitious mortar with added structural fibre reinforcement with a work-hardening effect for restoring concrete requiring a high level of ductility.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
Mapegrout BM
Two-component cementitious mortar with a low modulus of elasticity for repairing concrete.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
TECHNICAL DATA: Maximum size of aggregate: 6 mm. Mixing ratio: 100 parts of MAPEGROUT BETONTECH HPC with 11.5-12.5 parts of water and 0.25% of MAPECURE SRA. Pot life of mix: approx. 1 hour (at +20°C). Minimum applicable thickness: 3 cm. Maximum applicable thickness: 10 cm. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months. Application: pouring into formwork. Consumption: approx. 20.5 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags and 1,000 kg big-bags.
TECHNICAL DATA: Maximum size of aggregate: 10 mm. Mixing ratio: 100 parts of MAPEGROUT BETONTECH HPC10 with 9.5-10.0 parts of water. Pot life of mix: approx. 1 hour (at +20°C). Minimum applicable thickness: 5 cm. Maximum applicable thickness: 30 cm. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months. Application: pouring into formwork. Consumption: approx. 21 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags and 1,000 kg big-bags.
TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT BM comp. A with 18.8 parts of MAPEGROUT BM comp. B. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 3.5 cm per layer. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months (comp. A); 24 months (comp. B). Application: trowel, gauging trowel or rendering machine. Consumption: approximately 21 kg/m² per cm of thickness.
Packaging: 29.7 kg kits:
– 25 kg vacuum-packed polyethylene bags (comp. A); – 4.7 kg tanks (comp. B).
Mapegrout Easy Repair
NEW
Normal-setting thixotropic mortar for repairing deteriorated concrete.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
TECHNICAL DATA: Maximum size of aggregate: 2.5 mm. Mixing ratio: 100 part of MAPEGROUT EASY REPAIR with 16.0-17.0 parts of water. (4.0-4.25 l of water every 25 kg bag of product) and 0.25% of MAPECURE SRA (1 0.25 kg bottle every 4 bags of MAPEGROUT EASY REPAIR). Pot life of mix: approx. 1 h (at +20°C). Minimum thickness: 1 cm. Maximum thickness: 5 cm. Classification: EN 1504-3 as R4 class structural mortar. Storage: 12 months. Application: trowel, gauging trowel or by spray with rendering machine. Consumption: approx. 18.5 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
175
16. PRODUCTS FOR THE RESTORATION OF CONCRETE
Mapegrout Fast-Set
Fibre-reinforced, quick setting and hardening, compensated-shrinkage mortar for repairing concrete.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R3
REPAIR MORTAR
Mapegrout FMR
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
ere + Fib r olv
rs
P
ow
e
P
Two-component, shrinkagecompensated, sulphate-resistant, thixotropic mortar fibre-reinforced with flexible, alloy metal fibres, particularly suitable for repairing concrete structures where higher ductility is required.
d e r + Fi b e
Mapegrout FMR-PP
Shrinkage-compensated, sulphateresistant thixotropic mortar with workhardening behaviour reinforced with structural polymer fibres, particularly suitable for repairing concrete structures where high ductility is required.
Mapegrout GF Betoncino B1
Free-flowing, compensated-shrinkage cementitious mortar reinforced with inorganic fibres for repairing concrete structures where higher ductility is required.
176
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of MAPEGROUT FAST-SET with 15-16 parts of water. Pot life of mix: approximately 10 minutes (at +20°C). Minimum applicable thickness: 5 mm. Maximum applicable thickness: 2-2.5 cm per layer. Classification: EN 1504-3 - class R3 structural mortar. Storage: 12 months. Application: trowel or gauging trowel. Consumption: 18 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT FMR with 17-18 parts of water. Pot life of mix: approximately 1 hour (at 20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 5 cm per layer. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months. Application: gauging trowel, trowel or rendering machine. Consumption: 19 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
TECHNICAL DATA: Maximum size of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT FMR-PP with 16-18 parts of water. Pot life of mix: approx. 1 hour (at +20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 5 cm per layer. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months. Application: spreader, flat trowel or rendering machine. Consumption: 18 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
TECHNICAL DATA: Maximum size of aggregate: ≤ 10 mm. Mixing ratio: 100 parts of MAPEGROUT GF BETONCINO B1 with 10.5-12 parts of water and 0.16-0.32% of MAPECURE SRA. Pot life of mix: approx. 1 hour (at +20°C). Minimum applicable thickness: 5 cm. Maximum applicable thickness: 10 cm. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months. Application: pouring into formwork. Consumption: approx. 21 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags and 1,000 kg big-bags.
Mapegrout Hi-Flow
Fibre-reinforced, controlled-shrinkage mortar for repairing concrete.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
Mapegrout Hi-Flow B2
Shrinkage-compensated, free-flowing, fibre-reinforced cementitious mortar for repairs to concrete structures.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
Mapegrout Hi-Flow GF Hi-flow, shrinkage-compensated cementitious mortar reinforced with inorganic fibres, for repairing concrete structures where higher ductility is required.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
P
ow
e
ere + Fib r olv
rs
Flowable shrinkage-compensated, fibre-reinforced, high-ductility cementitious mortar, with stiff steel fibres for repairing concrete.
P
Mapegrout Hi-Flow TI 20
d e r + Fi b e
TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT HI-FLOW with 13-14 parts of water and 0.25% of MAPECURE SRA. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 5 cm per layer. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months. Application: pouring into formwork. Consumption: approximately 21 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
TECHNICAL DATA: Maximum size of aggregate: ≤ 10 mm. Mixing ratio: 100 parts of MAPEGROUT HI-FLOW B2 with 10-11 parts of water and 0.16-0.32% of MAPECURE SRA. Pot life of mix: approx. 1 hour (at +20°C). Minimum applicable thickness: 5 cm. Maximum applicable thickness: 10 cm. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months. Application: pouring into formwork. Consumption: approx. 21 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags and 1,000 kg big-bags.
TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT HI-FLOW GF with 14-16 parts of water and 0.25% of MAPECURE SRA. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 5 cm per layer. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months. Application: pouring into formwork. Consumption: approximately 21 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT HI-FLOW TI 20 with 14-16 parts of water and 0.25% of MAPECURE SRA. Pot life of mix: approximately 1 hour (at 20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 5 cm per layer. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months. Application: pouring into formwork. Consumption: approximately 20 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
177
16. PRODUCTS FOR THE RESTORATION OF CONCRETE
Mapegrout LM2K
Two-component, thixotropic, fibrereinforced, cementitious mortar with a low modulus of elasticity and added organic corrosion inhibitor for repairing concrete, applied in a single layer at a thickness of 3 to 20 mm.
TECHNICAL DATA:
Maximum dimension of aggregate: 1.6 mm. EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R3
REPAIR MORTAR
Mapegrout SV
Quick-setting and hardening, compensated-shrinkage hi-flow mortar for repairing concrete and fixing drains, manholes and urban architectural fittings in place.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
Mapegrout SV Fiber
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
ere + Fib r olv
rs
P
ow
e
P
Hi-flow, compensated-shrinkage, quick—setting and hardening, highductility cementitious mortar applied at temperatures down to -5°C, used in combination with stiff steel fibres for repairing concrete.
d e r + Fi b e
Mapegrout SV T
Quick-setting and hardening, compensated-shrinkage thixotropic mortar for repairing concrete and fixing drains, manholes and urban fittings in place.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
178
Mixing ratio: 100 parts of MAPEGROUT LM2K comp. A with 21 parts of MAPEGROUT LM2K comp. B. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 3 mm. Maximum applicable thickness: 2 cm per layer. Classification: EN 1504-3 - class R3 structural mortar. Storage: 12 months (comp. A); 24 months (comp. B). Application: gauging trowel, trowel or rendering machine. Consumption: approximately 21 kg/m² per cm of thickness. Packaging: 30.25 kg kits: – 25 kg vacuum-packed polyethylene bags (comp. A); – 5.25 kg tanks (comp. B).
TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT SV with 12-13 parts of water. Pot life of mix: 15 minutes (at +20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 5 cm per layer. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months. Colour: grey and black. Application: pouring into formwork. Consumption: 20 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT SV FIBER with 13.5-14.5 parts of water. Pot life of mix: approximately 20 minutes (at +20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 5 cm per layer. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months. Application: pouring into formwork. Consumption: approximately 20 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT SV T with 12.5-13.5 parts of water. Pot life of mix: 10 minutes (at +20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 5 cm per layer. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months. Colour: black. Application: gauging trowel or trowel. Consumption: 20 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
Mapegrout T40
Medium-strength (40 MPa), compensated-shrinkage fibre-reinforced thixotropic mortar for repairing concrete.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R3
REPAIR MORTAR
Mapegrout T60
Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
Mapegrout Thixotropic Fibre-reinforced, compensatedshrinkage mortar for repairing concrete.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
Set-retarding admixture for rapid-setting cementitious mortar.
+15/20 m
in.
Mapetard ES
TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT T40 with 15.5-16.5 parts of water. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 3-3.5 cm per layer. Classification: EN 1504-3 - class R3 structural mortar. Storage: 12 months. Application: gauging trowel, trowel or rendering machine. Consumption: approximately 18.5 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT T60 with 16.5-17.5 parts of water and 0.25% of MAPECURE SRA. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 5 cm per layer on vertical surfaces and 2 cm per layer on ceilings. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months. Application: gauging trowel, trowel or rendering machine. Consumption: 18.5 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT THIXOTROPIC with 15.5-16.5 parts of water. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 5 cm per layer. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months. Application: gauging trowel, trowel or rendering machine. Consumption: 19 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
TECHNICAL DATA: Consistency: liquid. Storage: 12 months. Consumption: one 0.25 kg bottle per 25 kg bag of PLANITOP SMOOTH & REPAIR or PLANITOP SMOOTH & REPAIR R4. Packaging: boxes of 25 0.25 kg canisters.
179
16. PRODUCTS FOR THE RESTORATION OF CONCRETE
Planitop 400
Quick-setting, controlled-shrinkage thixotropic mortar for repairing the surface of concrete, may be applied in various thicknesses from 1 to 40 mm in a single layer.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R3
REPAIR MORTAR
Planitop Smooth & Repair
R2-class, rapid-setting shrinkagecompensated, thixotropic, fibrereinforced, cementitious mortar for repairing and smoothing concrete, to be applied in a single layer from 3 mm to 40 mm.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R2
REPAIR MORTAR
Planitop Smooth & Repair R4
Rapid-setting shrinkage-compensated thixotropic fibre-reinforced class R4 structural cementitious mortar applied in a single layer from 3 to 40 mm thick for repairing and smoothing concrete.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
Stabilcem
Expansive, super-fluid cementitious binder for mixing injection and anchoring slurry, mortar and concrete.
EN 1504-6 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-6 ANCHORING STEEL REINFORCEMENT BARS
180
TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of PLANITOP 400 with 15-16 parts of water. Pot life of mix: approximately 10 minutes (at +20°C). Minimum applicable thickness: 1 mm. Maximum applicable thickness: 4 cm per layer. Classification: EN 1504-3 - class R3 structural mortar. Storage: 12 months. Application: trowel or gauging trowel. Consumption: 18.5 kg/m² per cm of thickness. Packaging: 25 kg bags; 20 kg boxes (4x5 kg packets).
TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of PLANITOP SMOOTH & REPAIR with 17-19 parts of water. Pot life of mix: approx. 15 mins. at a temperature between +10°C and +25°C. The pot life of the mix may be extended by futher 15-20 mins. by adding the set retarding admixture MAPETARD ES (one 0.25 kg bottle per 25 kg bag of PLANITOP SMOOTH & REPAIR). Minimum applicable thickness: 3 mm. Maximum applicable thickness: 4 cm per layer. Classification: – EN 1504-3 - class R2 non-structural mortar. – EN 1504-2 - coating (C) principles MC and IR. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: gauging trowel or trowel. Consumption: approximately 15 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags and 20 kg boxes (4x5 kg packets).
TECHNICAL DATA: Maximum size of aggregate: 0.4 mm. Mixing ratio: 100 parts of PLANITOP SMOOTH & REPAIR R4 with 16.5-17.5 parts of water. Pot life of mix: approx. 15 mins. at +10°C to +25°C. The pot life of the mix may be extended by 15-20 mins. by adding the set retarding admixture MAPETARD ES (one 0.25 kg bottle per 25 kg bag of PLANITOP SMOOTH & REPAIR R4). Minimum applicable thickness: 3 mm. Maximum applicable thickness: 4 cm per layer. Classification: EN 1504-3 - class R4 structural mortar; EN 1504-2 - coating (C) principles MC and IR. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Application: gauging trowel or trowel. Consumption: approx. 17 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
TECHNICAL DATA: Mixing ratio: – injection slurry: 100 parts of STABILCEM with 32 parts of water; – mortar, beton and concrete: according to the consistency and performance required from the aggregate. Storage: 12 months. Application: injection and pouring into formwork. Consumption: – injection slurry: 1.6 kg/l of cavities to be filled; – mortar and beton: 350-550 kg/m³; – concrete: 400 kg/m³. Packaging: 20 kg vacuum-packed polyethylene bags.
181
WATER-REPELLENT PRODUCTS FOR THE PROTECTION OF CONCRETE
17. WATER-REPELLENT PRODUCTS FOR THE PROTECTION OF CONCRETE
Planiseal WR 40
Ready-mixed 40% silane-based, hydrophobising, migrating liquid in water emulsion applied to the surface of reinforced concrete structures.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (H) PRINCIPLES
PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Planiseal WR 85 Gel
Ready-mixed, hydrophobising, protective, migrating, silane-based, thixotropic gel applied on the surface of reinforced concrete structures.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (H) PRINCIPLES
PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Planiseal WR 100
Ready-mixed pure silane-based, hydrophobising, protective, migrating liquid applied to the surface of reinforced concrete structures
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (H) PRINCIPLES
PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
184
TECHNICAL DATA: Dilution rate: ready-mix. Colour: white. Consistency: liquid. Dry solid content: 40%. Penetration depth: class I (< 10 mm). Classification: EN 1504-2 - coating (C) principles PI, MC and IR. Storage: 12 months. Application: low-pressure airless spray or roller. Consumption: approx. 0.1-0.2 kg/m² per coat depending on the porosity of the substrate. Packaging: 5 kg tanks.
TECHNICAL DATA: Dilution rate: ready to use. Colour: transparent. Consistency: gel. Dry solid content: 98%. Penetration depth: Class II > 10 mm. Classification: EN 1504-2 according to PI, MC and IR principles Storage: 12 months. Application: high-pressure airless spray or roller. Consumption: 0.3-0.5 kg/m². Packaging: 5 kg drums.
TECHNICAL DATA: Dilution rate: ready-mix. Colour: transparent. Consistency: liquid. Dry solid content: 98%. Penetration depth: class I (< 10 mm). Classification: EN 1504-2 - coating (C) principles PI, MC and IR. Storage: 24 months. Application: low-pressure airless spray or roller. Consumption: approx. 0.1-0.2 kg/m² per coat depending on the porosity of the substrate. Packaging: 5 kg tanks.
185
RENDERING AND INSTALLATION MORTARS
18. RENDERING AND INSTALLATION MORTARS
Intomap Allettamento
Hydrated lime and cement-based masonry mortar for pointing and laying bricks and concrete blocks.
EN 998-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-2
G-M5 MASONRY MORTAR
Intomap Allettamento H
Hydrophobic hydrated lime and cementbased masonry mortar for installing and pointing bricks and concrete blocks.
EN 998-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-2
G-M10 MASONRY MORTAR
Intomap Maxi Fibro
Coarse-textured, fibre-reinforced lime and hydraulic binder-based base render, for internal and external use.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS II RENDERING AND PLASTERING MORTAR
Intomap R2
Fibre-reinforced, base render made from lime and hydraulic binder for internal and external use.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS II RENDERING AND PLASTERING MORTAR
188
TECHNICAL DATA: Maximum dimension of aggregate: 1.4 mm. Mixing ratio: 100 parts of INTOMAP ALLETTAMENTO with 17-19 parts of water. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 3 cm. Classification: EN 998-2 - type G mortar, class M5. Storage: 12 months. Application: trowel. Consumption: approximately 18 kg/m² per cm of thickness. Packaging: 25 kg bags.
TECHNICAL DATA: Maximum size of aggregate: 2.5 mm. Mixing ratio: 100 parts of INTOMAP ALLETTAMENTO H with 17-18.5 parts of water. Pot life of mix: approx. 1 h (at +20°C). Minimum thickness: 1 cm. Maximum thickness: 3 cm. Classification: EN 998-1 - G type mortar M10 class. Storage: 12 months. Application: trowel. Consumption: approx. 17.5 kg/m² per cm of thickness. Packaging: 25 kg bag.
TECHNICAL DATA: Maximum size of aggregate: 2.5 mm. Mixing ratio: 100 parts of INTOMAP MAXI FIBRO with 18-20 parts of water. Pot life of mix: approx. 1 h (at +20°C). Minimum thickness: 1 cm. Maximum thickness: 4 cm (localised). Classification: EN 998-1 - GP type mortar CS II category. Storage: 12 months. Application: trowel or continuous feed rendering machine. Consumption: approx. 14.5 kg/m² per cm of thickness. Packaging: 25 kg bag.
TECHNICAL DATA: Maximum dimension of aggregate: 1.4 mm. Mixing ratio: 100 parts of INTOMAP R2 FIBRO with 19-21 parts of water. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 3 cm. Classification: EN 998-1 - type GP mortar, category CS II. Storage: 12 months. Application: continuous-mixing rendering machine or gauging trowel. Consumption: 14 kg/m² per cm of thickness. Packaging: 25 kg bags.
Intomap R2 Fibro
Base render made from lime and hydraulic binder for internal and external use.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS II RENDERING AND PLASTERING MORTAR
TECHNICAL DATA: Maximum dimension of aggregate: 1.4 mm. Mixing ratio: 100 parts of INTOMAP R2 with 19-21 parts of water. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 3 cm. Classification: EN 998-1 - type GP mortar, category CS II. Storage: 12 months. Application: continuous-mixing rendering machine or gauging trowel. Consumption: 14 kg/m² per cm of thickness. Packaging: 25 kg bags.
189
SMOOTHING AND PROTECTIVE PRODUCTS FOR CONCRETE AND RENDER SURFACES
19. SMOOTHING AND PROTECTIVE PRODUCTS FOR CONCRETE AND RENDER SURFACES
Mapefinish
Two-component cementitious mortar for finishing concrete.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R2
TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 4 parts of MAPEFINISH comp. A with 1 part of MAPEFINISH comp. B. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 1 mm. Maximum applicable thickness: 2-3 mm per layer. Classification: – EN 1504-3 - class R2 non-structural mortar. – EN 1504-2 - coating (C) principles MC and IR. Storage: 12 months (comp. A); 24 months (comp. B). Application: trowel. Consumption: 1.8 kg/m² per mm of thickness. Packaging: 30 kg kits: – 24 kg bags (comp. A); – 6 kg tanks (comp. B).
REPAIR MORTAR
Mapelastic Guard
Two-component, elastic cementitious mortar for protecting large concrete structures subjected to high stress.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Monofinish
One-component, normal-setting cementitious mortar for smoothing concrete and cementitious render.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
EN 1504-3
TECHNICAL DATA: Mixing ratio: 3 parts of MAPELASTIC GUARD comp. A with 1 part of MAPELASTIC GUARD comp. B. Pot life of mix: approximately 1 h (at +20°C). Minimum applicable thickness: 2 mm per layer. Classification: EN 1504-2 - coating (C) principles PI, MC and IR. Storage: 12 months (comp. A); 24 months (comp. B). Application: trowel or by spray with a rendering machine. Consumption: – approximately 1.7 kg/m² per mm of thickness (by trowel). – approximately 2.2 kg/m² per mm of thickness (by spray). Packaging: 32 kg kits: – 24 kg bags (comp. A); – 8 kg tanks (comp. B).
TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of MONOFINISH with 18-19 parts of water. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 1 mm. Maximum applicable thickness: 2-3 mm per layer. Classification: – EN 1504-3 - class R2 non-structural mortar. – EN 1504-2 - coating (C) principles MC and IR. Storage: 12 months. Application: trowel. Consumption: 1.4 kg/m² per mm of thickness. Packaging: 22 kg bags.
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R2
REPAIR MORTAR
Nivoplan
Smoothing mortar for indoor and outdoor walls and ceilings.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
192
TECHNICAL DATA: Mixing ratio: 100 parts of NIVOPLAN with 25 parts of water. Pot life of mix: 2-3 hours (at +23°C). Minimum applicable thickness: 2 mm. Maximum applicable thickness: 3 cm per layer. Classification: EN 998-1 - type GP mortar, category CS IV. Storage: 12 months. Colour: grey and white. Application: trowel or gauging trowel. Consumption: 14 kg/m² per cm of thickness. Packaging: 25 kg bags.
Planitop 100
Quick-setting, light-grey coloured fine mortar for repairing and smoothing concrete and render.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Planitop 200
Water-repellent cementitious skimming mortar with a fine-textured, natural finish for concrete and plastic, glass and porcelain coverings.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV
TECHNICAL DATA: Maximum dimension of aggregate: 0.2 mm. Mixing ratio: 100 parts of PLANITOP 100 with 26-27 parts of water. Pot life of mix: 20-30 minutes (at +20°C). Minimum applicable thickness: 1 mm. Maximum applicable thickness: 3 mm per layer. Classification: EN 1504-2 - coating (C) principles MC and IR. Storage: 12 months. Application: trowel. Consumption: 1.3 kg/m² per mm of thickness. Packaging: 25 kg bags.
TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of PLANITOP 200 with 20-23 parts of water. Pot life of mix: approximately 1 hour and 30 minutes (at +20°C). Minimum applicable thickness: 1 mm. Maximum applicable thickness: 3 mm per layer (6 mm in 2 layers with MAPENET 150 sandwiched between). Classification: – EN 998-1 - type GP mortar, category CS IV; – EN 1504-2 - coating (C) principles MC and IR. Storage: 12 months. Colour: grey and white. Application: trowel. Consumption: approximately 1.3 kg/m² per mm of thickness. Packaging: 25 kg bags.
RENDERING AND PLASTERING MORTAR
Planitop 207
Water-repellent cementitious skimming mortar with a medium-textured, natural finish for concrete and plastic, glass and porcelain coverings.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
Planitop 210
Water-repellent, cementitious skimming mortar with a fine-textured, natural finish for concrete and plastic coatings.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
TECHNICAL DATA: Maximum dimension of aggregate: 0.7 mm. Mixing ratio: 100 parts of PLANITOP 207 with 17-19 parts of water. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 1 mm. Maximum applicable thickness: 3 mm per layer (6 mm in 2 layers with MAPENET 150 sandwiched between). Classification: – EN 998-1 - type GP mortar, category CS IV; – EN 1504-2 - coating (C) principles MC and IR. Storage: 12 months. Colour: grey and white. Application: trowel. Consumption: approximately 1.5 kg/m² per mm of thickness. Packaging: 25 kg bags.
TECHNICAL DATA: Maximum size of aggregate: 0.4 mm. Mixing ratio: 100 parts of PLANITOP 210 with 21-24 parts of water. Pot life of mix: approximately 1 h (at +20°C). Minimum applicable thickness: 1 mm. Maximum applicable thickness: 3 mm (6 mm in 2 layers with MAPENET 150 embedded between the layers). Classification: – EN 998-1 - GP type mortar, category CS IV; – EN 1504-2 - coating (C) principles MC and IR. Storage: 12 months. Colours: grey and white. Application: trowel. Consumption: approximately 1.3 kg/m² per mm of thickness. Packaging: 25 kg bags.
193
19. SMOOTHING AND PROTECTIVE PRODUCTS FOR CONCRETE AND RENDER SURFACES
Planitop 217
Water-repellent cementitious skimming mortar with a coarse-textured, natural finish for concrete and plastic coatings.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
Planitop 510
Lime-cement skimming mortar with a fine-textured, natural finish for render.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS II RENDERING AND PLASTERING MORTAR
Planitop 517
Lime-cement skimming mortar with a coarse-textured, natural finish for render.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CSIII RENDERING AND PLASTERING MORTAR
Planitop 525
Natural-finish, white-coloured lime and cement smoothing compound for “fresh” or “hardened” internal and external render, applied in layers up to 3 mm thick.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS II RENDERING AND PLASTERING MORTAR
194
TECHNICAL DATA: Maximum size of aggregate: 1 mm. Mixing ratio: 100 parts of PLANITOP 217 with 19-22 parts of water. Pot life of mix: approximately 1 h (at +20°C). Minimum applicable thickness: 1 mm. Maximum applicable thickness: 3 mm (6 mm in 2 layers with MAPENET 150 embedded between the layers). Classification: – EN 998-1 - GP type mortar, category CS IV; – EN 1504-2 - coating (C) principles MC and IR. Storage: 12 months. Colours: grey and white. Application: trowel. Consumption: approximately 1.3 kg/m² per mm of thickness. Packaging: 25 kg bags.
TECHNICAL DATA: Maximum size of aggregate: 0.4 mm. Mixing ratio: 100 parts of PLANITOP 510 with 28-31 parts of water. Pot life of mix: approximately 1 h (at +20°C). Minimum applicable thickness: 1 mm. Maximum applicable thickness: 3 mm. Classification: EN 998-1 - type GP mortar, category CS II. Storage: 12 months. Colours: grey and white. Application: trowel. Consumption: approximately 1.3 kg/m² per mm of thickness. Packaging: 25 kg bags.
TECHNICAL DATA: Maximum size of aggregate: 1 mm. Mixing ratio: 100 parts of PLANITOP 517 with 20-22 parts of water. Pot life of mix: approximately 1 h (at +20°C). Minimum applicable thickness: 1 mm. Maximum applicable thickness: 3 mm. Classification: EN 998-1 - type GP mortar, category CS III. Storage: 12 months. Colours: grey and white. Application: trowel. Consumption: approximately 1.3 kg/m² per mm of thickness. Packaging: 25 kg bags.
TECHNICAL DATA: Maximum dimension of aggregate: 0,4 mm. Mixing ratio: 100 parts of PLANITOP 525 with 28-30 parts of water. Pot life of mix: approximately 2 hours (at +20°C). Minimum applicable thickness: 1 mm. Maximum applicable thickness: 3 mm. Classification: EN 998-1 - type GP mortar, category CS II. Storage: 12 months. Colour: white. Application: trowel. Consumption: approximately 1.3 kg/m² per mm of thickness. Packaging: 25 kg bags.
Planitop 530
Lime-cement skimming mortar with a fine-textured, natural finish for render and concrete.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of PLANITOP 530 with 24-27 parts of water. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 1 mm. Maximum applicable thickness: 3 mm per layer. Classification: – EN 998-1 - type GP mortar, category CS IV; – EN 1504-2 - coating (C) principles MC and IR. Storage: 12 months. Colour: grey and white. Application: trowel. Consumption: 1.25 kg/m² per mm of thickness. Packaging: 25 kg bags.
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
Planitop 540
Water-repellent cementitious skimming mortar with a fine-textured, natural finish for render and concrete.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of PLANITOP 540 with 24-26 parts of water. Pot life of mix: approximately 2 hours (at +20°C). Minimum applicable thickness: 1 mm. Maximum applicable thickness: 3 mm per layer. Classification: – EN 998-1 - type GP mortar, category CS IV; – EN 1504-2 - coating (C) principles MC and IR. Storage: 12 months. Colour: grey and white. Application: trowel. Consumption: approximately 1.2 kg/m² per mm of thickness. Packaging: 25 kg bags.
GP-CS IV RENDERING AND PLASTERING MORTAR
Planitop 560
Lime-cement skimming mortar with an ultra-fine-textured finish for render.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
Planitop 565
Fine-grained, white-coloured lime cement skimming compound for finishing “fresh” or hardened internal and external cementitious render, applied in layers up to 1 mm thick.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS II RENDERING AND PLASTERING MORTAR
TECHNICAL DATA: Maximum dimension of aggregate: < 0.1 mm. Mixing ratio: 100 parts of PLANITOP 560 with 39-43 parts of water. Pot life of mix: approximately 2 hours (at +20°C). Minimum applicable thickness: 1 mm. Maximum applicable thickness: 2 mm per layer. Classification: EN 998-1 - type GP mortar, category CS IV. Storage: 12 months. Colour: white. Application: trowel. Consumption: approx. 1.1 kg/m² per mm of thickness. Packaging: 20 kg bags.
TECHNICAL DATA: Maximum dimension of aggregate: < 0.1 mm. Mixing ratio: 100 parts of PLANITOP 565 with 37-39 parts of water. Pot life of mix: approximately 2 hours (at +20°C). Minimum applicable thickness: skimming to a feather edge. Maximum applicable thickness: 1 mm. Classification: EN 998-1 - type GP mortar, category CS II. Storage: 12 months. Colour: white. Application: trowel. Consumption: approximately 1.2 kg/m² per mm of thickness. Packaging: 20 kg bags.
195
19. SMOOTHING AND PROTECTIVE PRODUCTS FOR CONCRETE AND RENDER SURFACES
Planitop 600 RasaGesso
Lime-gypsum skimming mortar for internal render.
EN 13279-1
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 13279-1
B3-20-2 SKIMMING MORTAR FOR INTERNAL RENDER
Planitop 610 RasaGesso M
Gypsum-based skimming compound for internal render.
EN 13279-1
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 13279-1
B1-20-2 SKIMMING MORTAR FOR INTERNAL RENDER
Planitop Fast 330
Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Planitop Fine Finish
Ultra fine textured skimming mortar for concrete; recommended for exposed finish surfaces.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
196
TECHNICAL DATA: Maximum dimension of aggregate: < 0.1 mm. Mixing ratio: 100 parts of PLANITOP 600 RASAGESSO with approximately 50 parts of water. Pot life of mix: approximately 1 hour (at +23°C). Minimum applicable thickness: 1 mm. Maximum applicable thickness: 3 mm. Classification: EN 13279-1 (B3-20-2). Storage: 12 months. Colour: white. Application: trowel. Consumption: approximately 1 kg/m² per mm of thickness Packaging: 15 kg bags.
TECHNICAL DATA: Maximum size of aggregate: < 0.1 mm. Mixing ratio: 100 parts of PLANITOP 610 RASAGESSO M with approx. 60 parts of water. Pot life of mix: approx. 40-50 mins. (at +23°C). Minimum applicable thickness: 1 mm. Maximum applicable thickness: 5 mm. Classification: EN 13279-1 (B1-20-2). Storage: 12 months. Colour: white. Application: trowel. Consumption: approx. 1 kg/m² per mm of thickness. Packaging: 15 kg bags.
TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of PLANITOP FAST 330 with 18-20 parts of water. Pot life of mix: approximately 20 minutes (at +20°C). Minimum applicable thickness: 3 mm. Maximum applicable thickness: 3 cm per layer. Classification: – EN 998-1 - type GP mortar, category CS IV; – EN 1504-2 - coating (C) principles MC and IR. EMICODE: EC1 - very low emission. Storage: 12 months. Application: trowel. Consumption: 14.5 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
TECHNICAL DATA: Maximum size of aggregate: 0.2 mm. Mixing ratio: 100 parts of PLANITOP FINE FINISH with 40-42 parts of water. Pot life of mix: approx. 45 mins. (at +23°C). Minimum applicable thickness: skimming to a feather edge. Maximum applicable thickness: 3 mm per layer. Classification: EN 1504-2 - coating (C) principles MC and IR. Storage: 12 months. Application: rubber or metal trowel. Consumption: approx. 1.2 kg/m² per mm of thickness. Packaging: 20 kg bags.
Planitop Raso Max
NEW
Smooth-textured, fibre-reinforced, waterproof, lime-cement smoothing and levelling mortar applied in layers 2 to 10 mm thick over cementitious render, concrete and plastic coatings.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R2
REPAIR MORTAR
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
TECHNICAL DATA: Maximum size of aggregate: < 0.6 mm. Mixing ratio: 100 part of PLANITOP RASO MAX with 22-24 parts of water. Pot life of mix: approx. 1 h (at +20°C). Minimum thickness: 2 mm. Maximum thickness: 10 mm. Classification: – EN 998-1 - GP type mortar CS IV category; – EN 1504-3 - R2-class non-structural mortars. Storage: 12 months. Colour: white. Application: trowel. Consumption: approx. 1.45 kg/m² per cm of thickness. Packaging: 25 kg bag.
GP-CS IV RENDERING AND PLASTERING MORTAR
Planitop Superfine
Ultra-fine textured cementitious skimming compound applied in layers up to 1 mm thick for finishing off the surface of internal and external “fresh” or “cured” cementitious render.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS II RENDERING AND PLASTERING MORTAR
Triblock Finish
Three-component, epoxy-cementitious mortar for smoothing damp substrates.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
TECHNICAL DATA: Maximum size of aggregate: < 0.1 mm. Mixing ratio: 100 parts of PLANITOP SUPERFINE with 34-37 parts of water. Pot life of mix: approx. 2 hours (at +20°C). Minimum applicable thickness: skimming to a feather edge. Maximum applicable thickness: 1 mm. Classification: EN 998-1 - type GP mortar, category CS II. Storage: 12 months. Colour: white. Application: trowel. Consumption: approx. 1.3 kg/m² per mm of thickness. Packaging: 20 kg bags.
TECHNICAL DATA: Maximum dimension of aggregate: 0.25 mm. Mixing ratio: comp. A : comp. B : comp. C = 4.8 : 15.2 : 80. Pot life of mix: 40 minutes (at +23°C). Minimum applicable thickness: 1 mm. Maximum applicable thickness: 3 mm per layer (up to 5 mm on limited areas). Classification: EN 1504-2 - coating (C) principles MC and IR. Storage: 12 months. Application: trowel or rendering machine. Consumption: 2 kg/m² per mm of thickness. Packaging: 31.25 kg kits: – 1.5 kg drums (comp. A); – 4.75 kg drums (comp. B); – 25 kg bags (comp. C).
197
PRODUCTS FOR ANCHORING AND RAPID FIXING
20. PRODUCTS FOR ANCHORING AND RAPID FIXING
Lampocem
TECHNICAL DATA: Maximum dimension of aggregate: < 0.1 mm. Mixing ratio: 100 parts of LAMPOCEM with 20-21 parts of water. Pot life of mix: approximately 1 minute (at +23°C). Storage: 12 months. Application: trowel or gauging trowel. Consumption: 1.8 kg/dm³ of cavities to be filled. Packaging: 25 kg bags, boxes of 4x5 kg sachets and packages of 9x1 kg cartridges.
Ready-to-use, quick-setting and hardening, anti-shrinkage hydraulic binder.
Mapefill
Fluid expansive mortar for anchoring objects in place.
EN 1504-6 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-6 ANCHORING STEEL REINFORCEMENT BARS
Mapefill MF 610
Expansive mortar for precision anchoring in thick layers.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
EN 1504-6 IN COMPLIANCE WITH EUROPEAN STANDARD
TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEFILL with 14-15 parts of water. Pot life of mix: approximately 1 hour (at +20°C). Maximum applicable thickness: 6 cm per layer. Classification: EN 1504-6. Storage: 12 months. Application: pouring. Consumption: 1.95 kg/dm³ of cavities to be filled. Packaging: 25 kg vacuum-packed polyethylene bags.
TECHNICAL DATA: Maximum size of aggregate: ≤ 10 mm. Mixing ratio: 100 parts of MAPEFILL MF 610 with 9.5-10.5 parts of water and 0.16-0.32% of MAPECURE SRA. Pot life of mix: approx. 2 hours (at +20°C). Minimum applicable thickness: 5 cm. Maximum applicable thickness: 10 cm. Classification: – EN 1504-3 - class R4 structural mortar; – EN 1504-6. Storage: 12 months. Application: pouring. Consumption: approx. 21 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags and 1,000 kg big-bags.
EN 1504-6 ANCHORING STEEL REINFORCEMENT BARS
Mapefill R
Quick-hardening, fluid expansive mortar for quickly anchoring objects in place.
EN 1504-6 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-6 ANCHORING STEEL REINFORCEMENT BARS
200
TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEFILL R with 17-18 parts of water. Pot life of mix: approximately 45 minutes (at +20°C). Maximum applicable thickness: 6 cm per layer. Classification: EN 1504-6. Storage: 12 months. Application: pouring. Consumption: 1.95 kg/dm³ of cavities to be filled. Packaging: 25 kg vacuum-packed polyethylene bags.
Mapefix Combibox VE SF Kit
M8-M30 Ø8-Ø32 C1: Seismic performance
Styrene-free, hybrid vinyl ester resin-bases chemical fastener for structural loads. Certified for threaded rods, rebar, C1 seismic performance. Kit made up of 12 cartridges of MAPEFIX VE SF 300 or 420 ml MAPEFIX VE SF, 24 mixers, 5 T-shirts a 1 pair of work pants.
Ø8-Ø32 M12-M24 ZA Rebar: post installed rebar
M8-M30 Ø8-Ø32 OP7: non cracked concrete
OP1: cracked and non cracked concrete
Mapefix EP 385/585
M8-M30 Ø8-Ø32
M12-M16
Pure epoxy, resin-based chemical anchor for structural loads. Certified for threaded bar, construction bars, core-drilled holes and C2 seismic loads.
C2: Seismic performance
M12-M30 Ø12-Ø32 C1: Seismic performance
M10-M24 Ø10-Ø25 Coredrill: core drilled hole
Ø8-Ø40 Rebar: post installed rebar
OP1: cracked and non cracked concrete
M12-M30 Ø12-Ø32
Mapefix EP 470 Seismic
Pure epoxy resin-based chemical anchor for structural loads. Certified for threaded bar, construction bars, and C2 seismic loads.
M8-M30 Ø8-Ø32 OP7: non cracked concrete
M16-M24 C2: Seismic performance
Ø8-Ø32 Rebar: post installed rebar
M8-M30 OP7: non cracked concrete
M16-M24 OP1: cracked and non cracked concrete
Mapefix EP Mixer
Spare static mixer for epoxy chemical anchors.
TECHNICAL DATA: Suitable substrates: all solid and perforated substrates such as concrete and concrete derivates, brickwork, mixed masonry, wood and rock. Recommended penetrationF technique: drill, hammer drill, core drilling, diamond-tipped tools. Condition of hole for application: clean, dry, damp, wet or immersed underwater. Workability time at +20°C: 6 mins. Final hardening time at +20°C: 45 mins (dry substrate), 90 mins (wet substrate). Certified bar diameter: from M8 to M30; from Ø8 to Ø32. Certification: CE marking; ETA option 1 (anchors in tension and compressed zones); ETA option 7 (fasteners in compressive side); ETA Seismic performance C1; ETA option REBAR; fire resistance. Application: extrusion gun. Packaging: 300 ml, 420 ml. Storage: 12 months (300 ml) or 18 months (420 ml) at +5°C - +25°C.
TECHNICAL DATA: Suitable substrates: all solid and perforated substrates such as concrete and concrete derivates, brickwork, mixed masonry, wood and rock. Recommended penetration technique: drill, hammer drill, core drilling, diamond-tipped tools. Condition of hole for application: clean, dry, damp, wet or immersed underwater. Workability time at +20°C: 30 mins. Final hardening time at +20°C: 10 h (dry substrate), 20 h (wet substrate). Certified bar diameter: from M8 to M30, from Ø8 to Ø40. Certification: CE marking; ETA option 1 (anchors in tension and compressed zones); ETA option 7 (fasteners in compressive side); ETA Seismic performance C1 and C2; ETA option REBAR; ETA core drill; reaction to fire. Application: extrusion gun. Packaging: 385 ml and 585 ml. Storage: 24 months at +5°C - +25°C.
TECHNICAL DATA: Suitable substrates: all solid and perforated substrates such as concrete and concrete derivates, brickwork, mixed masonry, wood and rock. Recommended penetration technique: drill, hammer drill, core drilling, diamond-tipped tools. Condition of hole for application: clean, dry, damp or wet. Workability time at +20°C: 50 mins. Final hardening time at +20°C: 16 h (dry substrate). Certified bar diameter: from M8 to M30; from Ø8 to Ø32. Certification: CE marking; ETA option 1 (anchors in tension and compressed zones); ETA option 7 (fasteners in compressive side); ETA Seismic performance C2; ETA option REBAR. Application: extrusion gun. Packaging: 470 ml. Storage: 24 months at +5°C - +25°C.
TECHNICAL DATA: Suitable for the following MAPEI products: MAPEFIX EP 385, MAPEFIX EP 585, MAPEFIX EP 470 SEISMIC, MAPEFIX VE SF, MAPEFIX POLYBOND, MAPEFIX VINYBOND, MAPEFIX UM-H. Packaging: box of 12 mixers.
201
20. PRODUCTS FOR ANCHORING AND RAPID FIXING
Mapefix PE + VE Mixer
TECHNICAL DATA: Suitable for the following MAPEI products: MAPEFIX PE WALL, MAPEFIX PE SF, MAPEFIX VE SF. Packaging: box of 12 mixers.
Spare static mixer for polyester and vinylester chemical anchors.
Mapefix PE SF
Styrene-free, polyester resin chemical fastener for heavy loads.
M8-M16 European Technical Approval ETAG 029
M8-M24 OP7: non cracked concrete
Mapefix PE Wall
Styrene-free chemical anchor made from polyester for light loads certified for masonry.
M8-M12 European Technical Approval ETAG 029
Mapefix Metal Sleeve
Cylindrical, perforated metal sleeve for applying chemical anchors in hollow and loose substrates. 1 m long cylinder to be cut to size.
202
TECHNICAL DATA: Suitable substrates: all full or perforated substrates. Recommended penetration technique: drill or hammer-drill. Condition of hole for application: clean, dry or damp. Application temperature range of substrate: +5°C - +35°C. Workability time at +20°C: 6’. Final hardening time at +20°C: 45’ (dry substrate), 90’ (wet substrate). Certified diameter of bars: from M8 to M24. Certification available: CE mark; ETA option 7 (fasteners in compressive side) ETAG 029 (anchors in masonry). Application: extrusion gun. Packaging: 300 ml, 420 ml. Storage: 12 months (300 ml) or 18 months (420 ml) at +5°C - +25°C.
TECHNICAL DATA: Suitable substrates: all full and perforated masonries. Recommended penetration technique: drill or hammer-drill. Condition of substrate for application: dry, clean. Application temperature range of substrate: 0°/+30°C. Workability time at +20°C: 6’. Final hardening time at +20°C: 45’. Certified diameter of fastener: from M8 to M24. Certification available: CE mark; ETAG 029 (anchors in masonry). Application: extrusion gun. Packaging: 380 ml. Storage: 12 months at +5°C - +30°C.
TECHNICAL DATA: Diameter and length available: Ø20 x 1000mm x 25 pcs. Ø16 x 1000mm x 50 pcs. Ø12 x 1000mm x 50 pcs. Suitable for the following MAPEI products: MAPEFIX range.
Mapefix Plastic Sleeve
TECHNICAL DATA: Diameter and length available: Ø 12 x 80 mm; Ø 15 x 85 mm; Ø 20 x 85 mm. Suitable for the following MAPEI products: MAPEFIX range. Packaging: bag of 10 sleeves.
Cylindrical perforated plastic sleeve for applying chemical anchors in hollow substrates
Mapefix PolyBond
M8-M24 OP7: non cracked concrete
Polyester, resin-based chemical fastener for heavy loads. Certified for threaded rods in concrete.
Mapefix UM-H 420
Solvent-free, methanemethacrylate resin-bases chemical fastener for structural loads. High bond strength and high thermal resistance. Certified for threaded rods and rebars, C1 and C2 seismic loads.
M12-M24 C2: Seismic performance
M8-M30 Ø8-Ø32 C1: Seismic performance
Ø8-Ø32 M6-M20 IG Rebar: post installed rebar
M8-M30 Ø8-Ø32 OP7: non cracked concrete
OP1: cracked and non cracked concrete
Mapefix VE SF
Styrene-free, hybrid vinyl resin-based chemical anchor for structural loads. Certified for threaded bar, construction bars and C1 seismic loads.
M8-M30 Ø8-Ø32
M8-M30 Ø8-Ø32 C1: Seismic performance
Ø8-Ø32 M12-M24 ZA Rebar: post installed rebar
M8-M30 Ø8-Ø32 OP7: non cracked concrete
OP1: cracked and non cracked concrete
M8-M30 Ø8-Ø32
TECHNICAL DATA: Suitable substrates: all solid and perforated substrates such as concrete and concrete derivates, brickwork, mixed masonry. Colour: grey. Recommended penetration technique: rotary drill, hammer drill. Condition of hole for application: clean, dry. Application temperature range of substrate: from 0°C. Workability time at +20°C: 6 mins. Final hardening time at +20°C: 45 mins (dry substrate), 90 mins (wet substrate). Certified bar diameter: from M8 to M24. Certification: CE marking; ETA option 7 (fasteners in compressive side). Application: extrusion gun (MAPEI 310 PRO and MAPEI GUN 420 2K). Packaging: 300 ml e 420 ml. Storage: 12 months for 300 ml cartridge and 18 months for 420 ml cartridge.
TECHNICAL DATA: Suitable substrates: all solid and perforated substrates such as concrete and concrete derivates, brickwork, mixed masonry, wood and rock. Colour: grey. Recommended penetration technique: drill, hammer drill. Condition of hole for application: clean, dry, damp, wet or immersed underwater. Workability time at +20°C: 6 mins. Final hardening time at +20°C: 40 mins. Certified bar diameter: from M8 to M30, from Ø8 to Ø32. Certification: CE marking; ETA option 1 (anchors in tension and compressed zones); ETA option 7 (fasteners in compressive side); ETA Seismic performance C1 and C2; ETA option REBAR; Application: extrusion gun (MAPEI GUN 420 2K). Packaging: 420 ml. Storage: 18 months.
TECHNICAL DATA: Suitable substrates: all solid and perforated substrates such as concrete and concrete derivates, brickwork, mixed masonry, wood and rock. Recommended penetrationF technique: drill, hammer drill, core drilling, diamond-tipped tools. Condition of hole for application: clean, dry, damp, wet or immersed underwater. Workability time at +20°C: 6 mins. Final hardening time at +20°C: 45 mins (dry substrate), 90 mins (wet substrate). Certified bar diameter: from M8 to M30; from Ø8 to Ø32. Certification: CE marking; ETA option 1 (anchors in tension and compressed zones); ETA option 7 (fasteners in compressive side); ETA Seismic performance C1; ETA option REBAR; fire resistance. Application: extrusion gun. Packaging: 300 ml, 420 ml. Storage: 12 months (300 ml) or 18 months (420 ml) at +5°C - +25°C.
203
20. PRODUCTS FOR ANCHORING AND RAPID FIXING
Mapefix VinyBond
Styrene-free, hybrid vinyl ester resin-bases chemical fastener for structural loads. Certified for threaded rods in concrete and rebar in reinforced concrete.
Ø8-Ø32 M12-M24 ZA Rebar: post installed rebar
M8-M30 Ø8-Ø32 OP7: non cracked concrete
OP1: cracked and non cracked concrete
Mapegrout Anchor & Repair
Fibre-reinforced, compensatedshrinkage, mortar for repairing concrete and anchoring metal structures.
M8-M30 Ø8-Ø32
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
EN 1504-6 IN COMPLIANCE WITH EUROPEAN STANDARD
TECHNICAL DATA: Suitable substrates: all solid and perforated substrates such as concrete and concrete derivates, brickwork, mixed masonry, wood and rock. Colour: grey. Recommended penetration technique: drill, hammer drill. Condition of hole for application: clean, dry, damp, wet or immersed underwater. Workability time at +20°C: 6 mins. Application temperature range of substrate: from -10°C. Final hardening time at +20°C: 45 mins (dry substrate), 90 mins (wet substrate). Certified bar diameter: from M8 to M30, from Ø8 to Ø32. Certification: CE marking; ETA option 1 (anchors in tension and compressed zones); ETA option 7 (fasteners in compressive side) ETA option REBAR. Application: extrusion gun (MAPEI 310 PRO and MAPEI GUN 420 2K). Packaging: 300 ml and 420 ml. Storage: 12 months for 300 ml cartridge and 18 months for 420 ml cartridge.
TECHNICAL DATA: Maximum size of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT ANCHOR & REPAIR with 13-14.5 parts of water and 0.25% of MAPECURE SRA. Pot life of mix: approx. 1 h. Minimum thickness: 1 cm. Maximum thickness: approx. 5 cm. Classification: EN 1504-3 3 (R4 class structural mortar), EN 1504-6. Storage: 12 months. Colour: grey. Application: pouring into formworks. Consumption: approx. 21 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags.
EN 1504-6 ANCHORING STEEL REINFORCEMENT BARS
Planibond BA 100
Two-component fluid epoxy resin for anchoring steel bars.
EN 1504-6 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-6 ANCHORING STEEL REINFORCEMENT BARS
Planigrout 300
Three-component fluid epoxy mortar for anchorage work.
EN 1504-6 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-6 ANCHORING STEEL REINFORCEMENT BARS
204
TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 96 : 4 by weight. Pot life of mix: 45 mins. (at +23°C). Classification: EN 1504-6. Storage: 24 months. Application: by pouring. Consumption: approx. 2 kg/dm³. Packaging: 3 kg kit: – 2.88 kg drum (comp. A); – 0.12 kg canister (comp. B).
TECHNICAL DATA: Maximum dimension of aggregate: 2 mm. Mixing ratio: comp. A : comp. B : comp. C = 16 : 6 : 100. Pot life of mix: 1 hour (at 23°C). Maximum applicable thickness: 5 cm per layer. Classification: EN 1504-6. Storage: 12 months. Application: pouring. Consumption: 2 kg/m² per mm of thickness. Packaging: 12.2 kg kits: – 1.6 kg drums (comp. A); – 0.6 kg drums (comp. B); – 10 kg bags (comp. C). 36.6 kg units: – 4.8 kg drums (comp. A); – 1.8 kg drums (comp. B); – 30 kg bags (comp. C).
Planigrout 310
Three-component free-flowing high-strength rapid-hardening epoxy mortar applied in layers up to 10 cm thick for anchoring and grouting structures.
EN 1504-6 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-6 ANCHORING STEEL REINFORCEMENT BARS
TECHNICAL DATA: Maximum size of aggregate: 6 mm. Mixing ratio: comp. A : comp. B : comp. C = 10.5 : 1.6 : 84 by weight. Pot life of mix: approx. 30 minutes (at +23°C). Maximum applicable thickness: 10 cm per layer. Storage: 24 months. Application: by pouring. Consumption: approx. 2.2 kg/l of cavities to be filled. Packaging: 96.1 kg kit: – 10.5 kg drums (comp. A); – 1.6 kg canister (comp. B); – 84 kg vacuum-packed polyethylene bags (four 21 kg bags).
205
PRODUCTS FOR STRUCTURAL BONDING, SCREED REPAIRING AND INJECTING INTO CRACKED CONCRETE
21. PRODUCTS FOR STRUCTURAL BONDING, SCREED REPAIRING AND INJECTING INTO CRACKED CONCRETE
Adesilex PG1
Two-component, rapid-setting thixotropic adhesive for structural bonds.
EN 1504-4 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-4 STRUCTURAL BONDING
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable thickness: 1-2 mm. Maximum applicable thickness: 1 cm per layer. Classification: EN 1504-4. Storage: 24 months. Application: trowel. Consumption: 1.65-1.75 kg/m² per mm of thickness. Packaging: 2 kg kits: – 1.5 kg drums (comp. A); – 0.5 kg drums (comp. B). 6 kg kits: – 4.5 kg drums (comp. A); – 1.5 kg drums (comp. B).
Adesilex PG1 Rapid
Two-component, rapid-setting thixotropic adhesive for structural bonds.
EN 1504-4 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-4 STRUCTURAL BONDING
Adesilex PG2
Two-component thixotropic epoxy adhesive with long workability time for structural bonds.
EN 1504-4 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-4 STRUCTURAL BONDING
Adesilex PG4
Two-component, thixotropic epoxy adhesive with modified rheology for bonding MAPEBAND, MAPEBAND TPE, PVC strips and Hypalon and for structural bonds.
EN 1504-4 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-4 STRUCTURAL BONDING
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 10 minutes (at +23°C). Minimum applicable thickness: 1-2 mm. Maximum applicable thickness: 1 cm per layer. Classification: EN 1504-4. Storage: 24 months. Application: trowel. Consumption: 1.65-1.75 kg/m² per mm of thickness. Packaging: 6 kg kits: – 4.5 kg drums (comp. A); – 1.5 kg drums (comp. B).
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 50 minutes (at +23°C). Minimum applicable thickness: 1-2 mm. Maximum applicable thickness: 1 cm per layer. Classification: EN 1504-4. Storage: 24 months. Application: trowel. Consumption: 1.65-1.75 kg/m² per mm of thickness. Packaging: 6 kg kits: – 4.5 kg drums (comp. A); – 1.5 kg drums (comp. B).
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 70 minutes (at +23°C). Minimum applicable thickness: 1-2 mm. Maximum applicable thickness: 1 cm per layer. Classification: EN 1504-4. Storage: 24 months. Application: trowel. Consumption: 1.60-1.65 kg/m² per mm of thickness. Packaging: 2 kg kits: – 1.5 kg drums (comp. A); – 0.5 kg drums (comp. B). 6 kg kits: – 4.5 kg drums (comp. A); – 1.5 kg drums (comp. B). 30 kg kits: – 22.5 kg drums (comp. A); – 7.5 kg drums (comp. B).
208
Epojet
Two-component, super-fluid epoxy resin for injections and anchorings.
EN 1504-5 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-5 CONCRETE INJECTION
EN 1504-6
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-6
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 40 minutes (at +23°C). Classification: EN 1504-5 and EN 1504-6. Storage: 24 months. Application: injection or pouring. Consumption: – sealing cracks: 1.1 kg/l of cavities to be filled; – bonding concrete to steel: 1.1 kg/m² per mm of thickness. Packaging: 2.5 kg kits: – 2 kg drums (comp. A); – 0.5 kg bottles (comp. B). 4 kg kits: – 3.2 kg drums (comp. A); – 0.8 kg bottles (comp. B).
ANCHORING STEEL REINFORCEMENT BARS
Epojet LV
Two-component epoxy resin with a very low viscosity for injecting into microcracks, also on wet surfaces.
EN 1504-5 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-5 CONCRETE INJECTION
Eporip
Two-component, solvent-free, epoxy adhesive for construction joints and monolithic sealing of cracked screeds.
EN 1504-4 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-4 STRUCTURAL BONDING
Eporip Turbo
Two-component, quick-hardening polyester resin for sealing of cracked screeds and for little repair works.
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 35 minutes (at +23°C). Classification: EN 1504-5. Storage: 24 months. Application: injection or pouring. Consumption: – sealing cracks: 1.1 kg/l of cavities to be filled; – bonding concrete to steel: 1.1 kg/m² per mm of thickness. Packaging: 2.5 kg kits: – 2 kg drums (comp. A); – 0.5 kg bottles (comp. B).
TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: black; comp. B: white. Mixing ratio: comp. A : comp. B = 3 : 1. Setting time: 24 hours. Workability time: 60 minutes (at +23°C). Open time: 5 hours (at +10°C). Storage: 24 months. Application: brush, trowel or by pouring. Consumption: for bonding 1.35 kg/dm³. Packaging: – 10 kg kits: (7.5 kg of component A, 2.5 kg of component B). – 2 kg kits: (1.5 kg of component A, 0.5 kg of component B).
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 500 : 8. Pot life of mix: 7 minutes (at +23°C). Storage: 12 months. Application: brush or pouring. Consumption: 1.7 kg/l of cavities to be filled. Packaging: boxes of 6x508 g kits: – 500 g metal drums (comp. A); – 8 g tubes (comp. B).
209
PRODUCTS FOR GALVANIC CATHODIC PROTECTION
22. PRODUCTS FOR GALVANIC CATHODIC PROTECTION
Mapeshield E 25
Adhesive zinc plates applied directly on the surface of structures for galvanic cathodic protection against the corrosion of steel reinforcement rods.
Mapeshield I
Pure zinc anodes coated with a special conductive paste, for galvanic cathodic protection against corrosion of steel reinforcement in new structures and in structures requiring repair.
Mapeshield S
Zinc plate with adhesive backing for galvanic cathodic protection against the corrosion of steel structures exposed to atmospheric conditions.
212
TECHNICAL DATA: Thickness of plate: 0.25 mm. Height: 25 cm. Weight: 3.15 kg/m² ± 5%. Storage: 12 months. Application: external surfaces of concrete. Consumption: according to the density of steel reinforcement. Packaging: wooden boxes with 1 25 m x 25 cm wide rolls.
TECHNICAL DATA: Mapeshield I 10 10/10 10/20 External surface: 100 x 50 mm ± 10% 100 x 50 mm ± 10% Height: 12 mm ± 10% 15 mm ± 10% Weight: 230 g ± 10% 320 g ± 10% Storage: 12 months. Application: directly on steel reinforcement. Consumption: according to the density of steel reinforcement. Packaging: boxes of 24 pieces. Mapeshield I 30 30/10 30/20 External surface: 300 x 50 mm ± 5% 300 x 50 mm ± 5% Height: 10 mm ± 10% 12 mm ± 10% Weight: 450 g ± 10% 570 g ± 10% Storage: 12 months. Application: directly on steel reinforcement. Consumption: according to the density of steel reinforcement. Packaging: boxes of 12 pieces.
TECHNICAL DATA: Thickness of plate: 0.80 mm. Height: – MAPESHIELD S 100: 10 cm; – MAPESHIELD S 200: 20 cm; – MAPESHIELD S 300: 30 cm. Weight: 0.70 kg/m² ± 5%. Storage: 12 months. Application: on the surface of metal structures. Packaging: – MAPESHIELD S 100: boxes containing 5 10 cm x 50 m rolls; – MAPESHIELD S 200: boxes containing 3 20 cm x 50 m rolls; – MAPESHIELD S 300: boxes containing 2 30 cm x 50 m rolls.
213
COMPOSITE SYSTEMS FOR STRUCTURAL STRENGTHENING
23. COMPOSITE SYSTEMS FOR STRUCTURAL STRENGTHENING
Adesilex PG1
Two-component, rapid-setting thixotropic adhesive for structural bonds.
EN 1504-4 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-4 STRUCTURAL BONDING
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable thickness: 1-2 mm. Maximum applicable thickness: 1 cm per layer. Classification: EN 1504-4. Storage: 24 months. Application: trowel. Consumption: 1.65-1.75 kg/m² per mm of thickness. Packaging: 2 kg kits: – 1.5 kg drums (comp. A); – 0.5 kg drums (comp. B). 6 kg kits: – 4.5 kg drums (comp. A); – 1.5 kg drums (comp. B).
Adesilex PG1 Rapid
Two-component, rapid-setting thixotropic epoxy adhesive for structural bonds.
EN 1504-4 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-4 STRUCTURAL BONDING
Adesilex PG2
Two-component thixotropic epoxy adhesive with long workability time for structural bonds.
EN 1504-4 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-4 STRUCTURAL BONDING
Carboplate
Pultruded carbon fibre plate with a protective plastic film on both faces.
216
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 10 minutes (at +23°C). Minimum applicable thickness: 1-2 mm. Maximum applicable thickness: 1 cm per layer. Classification: EN 1504-4. Storage: 24 months. Application: trowel. Consumption: 1.65-1.75 kg/m² per mm of thickness. Packaging: 6 kg kits: – 4.5 kg drums (comp. A); – 1.5 kg drums (comp. B).
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 50 minutes (at +23°C). Minimum applicable thickness: 1-2 mm. Maximum applicable thickness: 1 cm per layer. Classification: EN 1504-4. Storage: 24 months. Application: trowel. Consumption: 1.65-1.75 kg/m² per mm of thickness. Packaging: 6 kg kits: – 4.5 kg drums (comp. A); – 1.5 kg drums (comp. B).
TECHNICAL DATA: Modulus of elasticity: ≥ 160 - ≥ 190 - ≥ 250. Fibre content: 68% - 68% - 68%. Thickness: 1.4 mm. Width: 50, 100 and 150 mm. Resistant section: 70, 140 and 210 mm². Tensile strength (MPa): ≥ 2700 - ≥ 3100 - ≥ 2400. Elongation at failure: 1.6% - 1.6% - 0.95%. Packaging: 25 m rolls.
Carbotube
TECHNICAL DATA: Tensile modulus of elasticity: 170,000 N/mm². Content of fibre by weight: 68%. Tensile strength: 3,100 N/mm². Outside diameter: 10 mm. Inside diameter: 8 mm. Elongation at failure: 1.6%. Packaging: boxes of 10x2 m rolls.
Pultruded carbon fibre tube preformed with epoxy resin with a protective plastic film for reinforced stitching in masonry.
Epojet
Two-component, super-fluid epoxy resin for injections and anchorings.
EN 1504-5 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-5 CONCRETE INJECTION
EN 1504-6
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-6
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 40 minutes (at +23°C). Classification: EN 1504-5 and EN 1504-6. Storage: 24 months. Application: injection or pouring. Consumption: – sealing cracks: 1.1 kg/l of cavities to be filled; – bonding concrete to steel: 1.1 kg/m² per mm of thickness. Packaging: 2.5 kg kits: – 2 kg drums (comp. A); – 0.5 kg bottles (comp. B). 4 kg kits: – 3.2 kg drums (comp. A); – 0.8 kg bottles (comp. B).
ANCHORING STEEL REINFORCEMENT BARS
Injectors Ø 23
Plastic injectors with a non-return valve for injecting epoxy resin.
Mapegrid B 250
Alkali-resistant, primed basalt-fibre mesh for structural “reinforced” strengthening of stone masonry, brick, tuff and concrete surfaces.
TECHNICAL DATA: Outside diameter: 23 mm. Length: 80 mm. Diameter of injection hole: 5 mm.
TECHNICAL DATA: Type of fibre: basalt fibre. Weight: 250 g/m². Mesh size: 6 x 6 mm. Tensile strength: 60 kN/m. Elongation at failure: 1.8%. Packaging: 1 m x 50 m rolls.
217
23. COMPOSITE SYSTEMS FOR STRUCTURAL STRENGTHENING
Mapegrid B 300
Pre-primed alkali-resistant basalt fibre mesh for structural “reinforced” strengthening of concrete and masonry structures.
Mapegrid B 400
Pre-primed alkali-resistant basalt fibre mesh for structural “reinforced” strengthening of masonry structures made of stone, brick, tuff and concrete.
Mapegrid C 170
High-strength carbon fibre mesh for “reinforced” structural strengthening work on masonry structures made of stone, brick, tuff and concrete.
Mapegrid G 120
Pre-primed, alkali-resistant (A.R.) glass fibre mesh, for localised reinforced “strengthening” of masonry substrates made of stone, brick, tuff and concrete.
218
TECHNICAL DATA: Type of fibre: basalt fibre. Weight: 300 g/m². Mesh size: 8x8 mm. Tensile strength: 80 kN/m. Elongation at failure: 1.8%. Packaging: 1 m x 50 m rolls.
TECHNICAL DATA: Type of fibre: basalt fibre. Weight: 400 g/m². Mesh size: 7x7 mm. Tensile strength: ≥ 3100 MPa. Elongation at failure: ≥ 3.5%. Packaging: 1 m x 50 m rolls.
TECHNICAL DATA: Type of fibre: high-strength carbon. Weight: ≥170 g/m². Mesh size: 10x10 mm. Tensile strength: >240 kN/m. Elongation at failure: 2%. Packaging: 50 m long by 1 m wide rolls.
TECHNICAL DATA: Type of fibre: A.R. type glass fibre Weight: 125 g/m². Mesh size: 12.7 x 12.7 mm. Tensile strength: 30 kN/m. Elongation at failure: 1.8%. Packaging: 25 m x 45 cm rolls and 50 m x 1 m rolls.
Mapegrid G 220
TECHNICAL DATA: Type of fibre: A.R. type glass fibre. Weight: 225 g/m². Mesh size: 25 x 25 mm. Tensile strength: 45 kN/m. Elongation at failure: < 1.8%. Packaging: 45.70 m x 90 cm rolls.
Alkali-resistant, pre-primed glass fibre mesh for structural “reinforced” strengthening of stone, brick and tuff and mixed masonry structures.
Mapei Steel Bar 304
TECHNICAL DATA: Type of steel: ultra high-strength AISI 304 steel. Diameter: 6 mm. Packaging: 10 m rolls.
Ultra high-strength helical bars in AISI 304 stainless steel for reinforced pointing on masonry structures.
Mapei Steel Bar 316
TECHNICAL DATA: Type of steel: ultra high-strength AISI 316 steel. Diameter: 6 mm. Packaging: 10 m rolls.
Ultra high-strength helical bars in AISI 316 stainless steel for reinforced pointing on masonry structures.
Mapei Steel Dry 316
Ultra high-strength “dry-applied” helical AISI 316 stainless steel bars for strengthening reinforced concrete, masonry and wooden structural members. Available in 6, 8 and 10 mm diameter. Available upon request in AISI 304 stainless steel.
EN 845-1
TECHNICAL DATA: Type of steel: ultra high-strength AISI 316 steel. Diameter: 6, 8 and 10 mm. Length: – Ø 6 mm: lengths of 40, 60 and 100 cm; – Ø 8 mm: lengths of 40, 60, 80 and 100 cm; – Ø 10 mm: lengths of 40, 60 and 80 cm. Packaging: boxes of 50 pieces (40 and 60 cm lengths); tubes of 50 pieces (80 and 100 cm lengths).
219
23. COMPOSITE SYSTEMS FOR STRUCTURAL STRENGTHENING
Mapenet EM 30
Pre-impregnated alkali-resistant A.R. glass fibre mesh (FRP) used to make “reinforced” structural render on concrete and masonry structures.
Mapenet EM 40
Pre-impregnated alkali-resistant A.R. glass fibre mesh (FRP) used to make “reinforced” structural render on concrete and masonry structures.
Mapenet EM Connector
Pre-formed “L” shaped fasteners made from alkali-resistant glass fibre and thermo-setting vinylester-epoxy resin available in different lengths (20, 50, 70 cm).
Maperod C
High tensile pultruded carbon fibre rebars pre-formed with epoxy resin for structural strengthening of damaged concrete, wooden and masonry elements.
220
TECHNICAL DATA: Type of fibre: A.R. type glass fibre. Weight: 420 g/m². Mesh size: 30 x 30 mm. Section of single bar: 2.37 mm². Bars/metre: 33. Tensile strength of single bar: 3.20 kN. Tensile modulus of elasticity: 33,000 N/mm². Packaging: 1 m x 25 m rolls.
TECHNICAL DATA: Type of fibre: A.R. type glass fibre. Weight: 270 g/m². Mesh size: 40 x 40 mm. Section of single bar: 1.518 mm². Bars/metre: 25. Tensile strength of single bar: 2.25 kN. Tensile modulus of elasticity: 33,000 N/mm². Packaging: 1 m x 50 m rolls.
TECHNICAL DATA: Type of fibre: alkali-resistant glass fibre. Equivalent diameter of bar: 7 mm. Tensile strength: 32 kN. Tensile modulus of elasticity: 35,000 N/mm². Packaging: boxes of 100 pcs.
TECHNICAL DATA: Modulus of elasticity: 155,000 N/mm². Fibre content: 71%. Transversal section: 73.9 mm². Tensile strength: 2,000 N/mm². Single shear strength: 75 N/mm². Nominal diameter: 9.7 mm. Packaging: boxes of 10x2 m rolls.
Maperod G
TECHNICAL DATA: Tensile modulus of elasticity: 40,800 N/mm². Fibre content: 75%. Transversal section: 71.26 mm². Tensile strength: 760 N/mm². Nominal diameter: 9.53 mm. Shear strength: 152 N/mm². Packaging: boxes of 10x6 m rolls.
Pultruded glass fibre rebar pre-formed with epoxy-modified vinylester resin for structural reinforcement of damaged reinforced concrete, brick, stone and tuff elements.
MapeWrap 11
Two-component, normal-setting, thixotropic epoxy grout for evening out concrete surfaces and for structural bonding.
EN 1504-4 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-4 STRUCTURAL BONDING
MapeWrap 12
Two-component, slow-setting, thixotropic epoxy grout for evening out concrete surfaces and for structural bonding.
EN 1504-4 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-4 STRUCTURAL BONDING
MapeWrap 21
Two-component, super-fluid epoxy resin for impregnating MAPEWRAP using the “damp system”.
EN 1504-4 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-4 STRUCTURAL BONDING
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Workability time: 35 minutes (at +23°C). Bond strength to concrete: > 3 N/mm² (after 7 days at +23°C - failure of substrate). Classification: EN 1504-4. Application: trowel. Consumption: 1.55 kg/m² per mm of thickness. Packaging: 6 kg kits: – 4.5 kg drums (comp. A); – 1.5 kg drums (comp. B).
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Workability time: 50 minutes (at +23°C). Bond strength to concrete: > 3 N/mm² (after 7 days at +23°C - failure of substrate). Classification: EN 1504-4. Application: trowel. Consumption: 1.55 kg/m² per mm of thickness. Packaging: 6 kg kits: – 4.5 kg drums (comp. A); – 1.5 kg drums (comp. B).
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Workability time: 40 minutes (at +23°C). Bond strength to concrete: > 3 N/mm² (after 7 days at +23°C - failure of substrate). Brookfield Viscosity: 300 mPa·s (rotor 1 - 10 revs). Classification: EN 1504-4. Consumption: according to the type and width of the fabric. Packaging: 5 kg kits: – 4 kg drums (comp. A); – 1 kg drums (comp. B).
221
23. COMPOSITE SYSTEMS FOR STRUCTURAL STRENGTHENING
MapeWrap 31
Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using the “dry system”. EN 1504-4 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-4 STRUCTURAL BONDING
MapeWrap 31 T
Thixotropic epoxy adhesive for impregnating MAPEWRAP fabrics using the “dry system”.
EN 1504-4 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-4 STRUCTURAL BONDING
MapeWrap B FIOCCO
Unidirectional high strength basalt fibre cord to be impregnated with MAPEWRAP 21 (two-component superfluid epoxy resin) to make “structural connections”.
MapeWrap B UNI-AX Unidirectional, high strength basalt fibre fabric.
222
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Workability time: 40 minutes (at +23°C). Bond strength to concrete: > 3 N/mm² (after 7 days at +23°C - failure of substrate). Brookfield Viscosity: 6,500 mPa·s (rotor 3 - 10 revs). Classification: EN 1504-4. Consumption: according to the type and width of the fabric. Packaging: 5 kg kits: – 4 kg drums (comp. A); – 1 kg drums (comp. B).
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Workability time: 50 minutes (at +23°C). Adhesion to concrete: > 3 N/mm² (after 7 days at +23°C - failure of concrete). Brookfield viscosity: 70,000 mPa·s (rotor 6 - 10 revs). Consumption: according to the type and width of the fabric. Packaging: 5 kg kits: – 4 kg drums (comp. A); – 1 kg drums (comp. B).
TECHNICAL DATA: Type of fibre: high-strength basalt. Diameters available: 10, 12 mm. Equivalent surface of dry fabric: – diam. 10 mm 24.27 mm²; – diam. 12 mm 28.76 mm². Modulus of elasticity: 87,000 N/mm². Tensile strength: 3,101 N/mm². Elongation at failure: 3.15%. Packaging: 10 m rolls.
TECHNICAL DATA: Weight: 400-600 g/m². Equivalent thickness of dry fabric: 0.143-0.215 mm. Tensile strength: 4.840 N/mm². Tensile modulus of elasticity: 89 GPa. Width: 40 cm. Elongation at failure: 3.15%. Packaging: 50 m rolls.
MapeWrap C BI-AX
Balanced, high-strength, bi-directional carbon fibre fabric.
Mapewrap C Connector
20/15/6 mm - 20/15/8 mm - 20/15/10 mm Pultruded carbon fibre connector for anchoring with one end to be impregnated with MAPEWRAP 21 Length of the pre-formed bar: 20 cm, length of the open end: 15 cm. Available with 6, 8 and 10 mm diameter.
TECHNICAL DATA: Weight: 230-360 g/m². Equivalent thickness of dry fabric: 0.064-0.10 mm. Tensile strength: > 4.800 MPa. Tensile modulus of elasticity: 230 GPa. Width: 20-40 cm. Elongation at failure: 2.1%. Packaging: 50 m rolls.
TECHNICAL DATA: Type of fibre: high-strength carbon. Diameters available: 6, 8, 10 mm. Nominal area: diameter 6 mm 28, 30 mm²; diameter 8 mm 50, 30 mm²; diameter 10 mm 78, 50 mm²; Modulus of elasticity: 150,000 N/mm² ± 5%. Tensile strength: ≥2,100 N/mm². Elongation at failure: 1.5%. Packaging: 50 pcs box.
Glass fiber version available upon request.
MapeWrap C FIOCCO
High-strength carbon fibre cord to be impregnated with MAPEWRAP 21 (two-component, super-fluid epoxy resin) to make “structural connections”.
MapeWrap C QUADRI-AX
Balanced, high-strength, quadridirectional carbon fibre fabric.
TECHNICAL DATA: Type of fibre: high-strength carbon. Diameters available: 6, 8, 10 and 12 mm. Equivalent surface area of dry fabric: diam. 6 mm 15.70 mm²; diam. 8 mm 21.24 mm²; diam.10 mm 26.79 mm²; diam.12 mm 31.40 mm²; Modulus of elasticity: 230,000 N/mm². Tensile strength: 4,830 N/mm². Elongation at failure: 1.8%. Packaging: 10 m rolls.
TECHNICAL DATA: Weight: 380 g/m². Equivalent thickness of dry fabric: 0.053 mm. Tensile strength: > 4.800 MPa. Tensile modulus of elasticity: 230 GPa. Width: 30-48.5 cm. Elongation at failure: 2.1%. Packaging: 50 m rolls.
223
23. COMPOSITE SYSTEMS FOR STRUCTURAL STRENGTHENING
MapeWrap C UNI-AX
High-strength, unidirectional carbon fibre fabric with a high modulus of elasticity.
MapeWrap C UNI-AX HM
High-strength unidirectional carbon fibre fabric with very high modulus of elasticity.
MapeWrap EQ Adhesive
One-component, ready-to-use, polyurethane-based adhesive in watery dispersion with very low emission level of volatile organic compounds (VOC) for impregnating MAPEWRAP EQ NET bi-directional, primed glass fibre fabric.
MapeWrap EQ Net
Bi-directional, primed glass fibre fabric to protect secondary partition walls in buildings from seismic activity and to prevent brick-cement floors collapsing.
224
TECHNICAL DATA: Weight: 300-600 g/m². Equivalent thickness of dry fabric: 0.164-0.331 mm. Tensile strength: ≥ 4,900 N/mm². Tensile modulus of elasticity: 252,000 ± 2% N/mm². Elongation at failure: ≥ 2%. Width: 10 - 20 - 40 cm. Packaging: 50 m rolls.
TECHNICAL DATA: Weight: 300-600 g/m². Equivalent thickness of dry fabric: 0.164-0.329 mm. Tensile strength: 4,410 N/mm². Tensile modulus of elasticity: 390,000 N/mm². Elongation at failure: 1.1%. Width: 10 - 20 - 40 cm. Packaging: 50 m rolls.
TECHNICAL DATA: Consistency: gel. Colour: milky white. Storage: 12 months (protect from frost). Final hardening time: 24 hours. EMICODE: EC1 Plus - very low emission. Consumption: 0.5-0.6 kg/m². Packaging: 6 kg drums.
TECHNICAL DATA: Type of fibre: type E glass fibre. Weight: 286 g/m². Equivalent thickness of dry fabric: 0.057 mm². Tensile strength: > 1620 N/mm². Tensile modulus of elasticity: 42 GPa. Width: 100 cm. Elongation at failure: 4%. Packaging: 50 m rolls.
MapeWrap G FIOCCO
High-strength glass fibre cord to be impregnated with MAPEWRAP 21 (two-component, super-fluid epoxy resin) to make “structural connections”.
MapeWrap G UNI-AX
Unidirectional, high strength glass fibre fabric.
MapeWrap Primer 1 Two-component epoxy primer specifically formulated for the MAPEWRAP system.
MapeWrap S Fabric 650
High-strength uni-directional galvanized steel fibre fabric for structural strengthening.
TECHNICAL DATA: Type of fibre: E type glass. Diameters available: 6, 8, 10 and 12 mm. Equivalent surface area of dry fabric: diam. 6 mm 16.34 mm²; diam. 8 mm 21.45 mm²; diam. 10 mm 27.58 mm²; diam. 12 mm 32.69 mm². Modulus of elasticity: 80,700 N/mm². Tensile strength: 2,560 N/mm². Elongation at failure: > 3%. Packaging: 10 m rolls.
TECHNICAL DATA: Type of fibre: E type glass. Weight: 900 g/m². Equivalent thickness of dry fabric: 0.48 mm. Tensile strength: 2,560 N/mm². Tensile modulus of elasticity: 80.7 GPa. Elongation at failure: 3-4%. Width: 30-60 cm. Packaging: 50 m rolls.
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Workability time: 90 minutes (at +23°C). Bond strength to concrete: > 3 N/mm² (after 7 days at +23°C - failure of substrate). Brookfield Viscosity: 300 mPa·s (rotor 1 - 10 revs). Consumption: 250-300 g/m². Packaging: 2 kg kits: – 1.5 kg drums (comp. A); – 0.5 kg drums (comp. B).
TECHNICAL DATA: Type of fibre: galvanized steel fibres. Weight (metallic fibres only): 650 g/m². Load-resistant area per unit of width: 97.405 mm²/m. Tensile strength: > 2,580 N/mm². Tensile modulus of elasticity: 200,000 N/mm². Elongation at failure: 1.29%. Width: 30 cm. Packaging: 50 m rolls.
225
23. COMPOSITE SYSTEMS FOR STRUCTURAL STRENGTHENING
MapeWrap S Fabric 2000
TECHNICAL DATA: Type of fibre: galvanized steel fibre. Weight (metallic fibres only): 2000 g/m². Load-resistant area per unit of width: 266 mm²/m. Tensile strength: > 2.580 N/mm². Tensile modulus of elasticity: 200,000 N/mm². Elongation at failure: > 1.29%. Width: 30 cm. Packaging: 25 m rolls.
Unidirectional, high-strength galvanized steel fibre fabric for structural strengthening.
MapeWrap SG FIOCCO
TECHNICAL DATA: Type of fibre: galvanized steel. Diameters available: 10 mm. Resistant section of connector: 19.415 mm². Modulus of elasticity: > 200,000 N/mm². Tensile strength: > 2,400 N/mm². Elongation at failure: >1.6%. Packaging: 10 m rolls.
High-strength galvanized steel fibre cord for structural strengthening.
Planitop HDM Maxi
Two-component ready-mixed, high ductility pozzolan-reaction, fibrereinforced mortar for structural “reinforced” strengthening work, when used in combination with mesh from the MAPEGRID line, and for smoothing and levelling concrete and masonry.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R2
REPAIR MORTAR
EN 998-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-2
G-M25
TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of PLANITOP HDM MAXI comp. A with 1 part of PLANITOP HDM MAXI comp. B. Pot life of mix: approximately 1 hour (at +20°C). Maximum applicable thickness: 25 mm. Classification: EN 1504-3 - class R2 non-structural mortar and EN 998-2 - type G mortars, class M25. Storage: 12 months (comp. A); 24 months (comp. B). Application: gauging trowel, trowel or rendering machine. Consumption: approximately 1.85 kg/m² per mm of thickness. Packaging: 31.25 kg kits: – 25 kg vacuum-packed polyethylene bags (comp. A); – 6.25 kg drums (comp. B).
MASONRY MORTAR
Planitop HDM Restauro Two-component, pre-blended, high-ductility, fibre-reinforced, cement-free hydraulic lime (NHL) and ECO-POZZOLAN-based light-coloured mortar, particularly recommended for “reinforced” structural strengthening of masonry substrates in combination with the MAPEGRID meshes and for evening out stone, brickwork and tuff substrates.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
EN 998-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-2
G-M15 MASONRY MORTAR
226
TECHNICAL DATA: Maximum dimension of aggregate: 1.5 mm. Mixing ratio: 1 25 kg comp. A with 1 drums of comp. B. Pot life of mix: approximately 1 hour (at +20°C). Thickness applied: from 3 to 10 mm per layer. Classification: EN 998-1 - type GP mortar, category CS IV and EN 998-2 - type G mortar, class M15. Storage: 12 months (comp. A); 24 months (comp. B). Application: gauging trowel, trowel or rendering machine. Consumption: approximately 1.9 kg/m² per mm of thickness. Packaging: 30 kg kits: – 25 kg bags (comp. A); – 5 kg drums (comp. B).
Planitop HPC
Two-component ultra high performance shrinkage-compensated freeflowing high ductility fibre-reinforced cementitious mortar with stiff steel fibres for restoring and repairing concrete.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
N.B.: PLANITOP HPC is sold with FIBRES HPC (1.625 kg of FIBRES HPC per 25 kg bag of PLANITOP HPC).
TECHNICAL DATA: Maximum size of aggregate: 2.5 mm. Mixing ratio: 100 parts of PLANITOP HPC with 6.5 parts of FIBRES HPC and 12-13 parts of water. Pot life of mix: approximately 1 h (at +20°C). Minimum applicable thickness: 1.5 cm. Maximum applicable thickness: 5 cm per layer. Classification: EN 1504-3 class R4 structural mortar and EN 1504-6. Application: pouring into formwork. Consumption: approx. 20 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyester bag.
EN 1504-6 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-6 ANCHORING STEEL REINFORCEMENT BARS
Fibres HPC
TECHNICAL DATA: Consumption: 1.625 kg per 25 kg bag of PLANITOP HPC. Packaging: 6.5 kg box.
Stiff steel fibres used in combination with PLANITOP HPC mortar.
Planitop HPC Floor
One-component, ultra-high strength, highly ductile, highly fluid, fibre-reinforced with steel fibres, compensated shrinkage cementitious mortar for strengthening the external face of floor slabs.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
TECHNICAL DATA: Maximum size of aggregate: 1 mm. Mixing ratio: 100 parts of PLANITOP HPC FLOOR with 11.5-12.5 parts of water. Pot life of mix: approx. 1h (at +20°C). Minimum thickness: 1 cm. Maximum thickness: 4 cm. Classification: EN 1504-3 category R4 structural mortar and EN 1504-6. Application: pouring/casting. Consumption: approx. 21 kg/m² per cm of thickness. Packaging: 25 kg vacuum packed polyester bags.
EN 1504-6 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-6 ANCHORING STEEL REINFORCEMENT BARS
Planitop HPC Floor 46 Ultra-high performance, high ductility, free-flowing cementitious mortar reinforced with steel fibres.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
TECHNICAL DATA: Maximum size of aggregate: 6 mm. Mixing ratio: 100 parts of PLANITOP HPC FLOOR 46 with 9.5-10 parts of water. Pot life of mix: approx. 45 mins. (at +20°C). Minimum applicable thickness: 45 cm. Classification: EN 1504-3 class R4 structural mortar. Application: pouring. Consumption: approx. 22 kg/m² per mm of thickness. Packaging: 25 kg vacuum-packed polyester bags and 1000 kg big bags.
227
23. COMPOSITE SYSTEMS FOR STRUCTURAL STRENGTHENING
Planitop HPC Floor 46 T NEW
Ultra-high performance, high ductility, semi-fluid cementitious mortar reinforced with steel fibres.
EN 1504-3
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
Planitop HPC Floor T
One-component, very high performance, high ductility, reinforced with steel fibres, compensated-shrinkage, semi-fluid cementitious mortar for strengthening the underside of floors. Particularly suitable for warped wooden floors.
EN 1504-3
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
Planitop HPC LV
Ultra high performance self-compacting expanding cementitious mortar.
EN 1504-3 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
EN 1504-6 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-6 ANCHORING STEEL REINFORCEMENT BARS
228
TECHNICAL DATA: Maximum size of aggregate: 6 mm. Mixing ratio: 100 parts of PLANITOP HPC FLOOR 46 T with 9.2-9.7 parts of water. Pot life of mix: approx. 45 mins. (at +20°C). Minimum applicable thickness: 45 cm. Classification: EN 1504-3 class R4 structural mortar. Application: pouring. Consumption: approx. 22.5 kg/m² per mm of thickness. Packaging: 25 kg vacuum-packed polyester bags and 1000 kg big bags.
TECHNICAL DATA: Maximum size of aggregate: 1 mm. Mixing ratio: 100 parts of PLANITOP HPC FLOOR T with 11.5-12.5 parts of water. Pot life of mix: approx. 40 mins. (at +20°C). Minimum applicable thickness: 1 cm. Maximum applicable thickness: 4 cm. Classification: EN 1504-3 class R4 structural mortar. Application: by pouring. Consumption: approx. 21 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyester bags.
TECHNICAL DATA: Maximum size of aggregate: 6 mm. Mixing ratio: 100 parts of PLANITOP HPC LV with 9-9.4 parts of water. Pot life of mix: approx. 1 hour (at +20°C). Minimum applicable thickness: 2 cm. Maximum applicable thickness: 10 cm per layer. Classification: EN 1504-3 class R4 structural mortar, EN 1504-6. Application: pouring into formwork. Consumption: approx. 22 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyester bags.
Planitop HPC Tixo
Two-component, thixotropic, ultrahigh performance, fibre-reinforced cementitious mortar, with a workhardening effect, with steel fibres for restoring and repairing concrete structures.
EN 1504-3
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-3
R4
REPAIR MORTAR
N.B.: PLANITOP HPC TIXO is sold with FIBRES HPC (1.625 kg of FIBRES HPC per 25 kg bag of PLANITOP HPC TIXO).
Fibres HPC
TECHNICAL DATA: Consumption: 1.625 kg per 25 kg bag of PLANITOP HPC TIXO. Packaging: 6.5 kg box.
Stiff steel fibres used in combination with PLANITOP HPC mortar.
Planitop Intonaco Armato
Two component, ready-mixed, cementfree, high-ductility fibre-reinforced natural hydraulic lime (NHL) and ECO-POZZOLAN mortar, containing 30% of recycled raw material, particularly recommended for levelling off the surface of stone, bricks and tuff, and for the structural strengthening of existing facing walls, including when extra strengthening mesh is not applied.
TECHNICAL DATA: Maximum size of aggregate: 1 mm. Mixing ratio: 100 parts by weight of component A (powder) with 6.5 parts by weight of component B (FIBERS HPC) (1.625 kg of fibres per 25 kg bag) and 17 parts by weight of water (4.25 l of water per 25 kg bag). Pot life of mix: approx. 1 h (at +20°C). Maximum thickness: 40 mm per coat. Classification: EN 1504-3 3 as R4 class structural mortar. Application: with spreader, trowel. No need of formworks in vertical or on ceiling application. Consumption: approx. 21 kg/m² per cm of thickness. Packaging: component A (powder) 25 kg vacuumpacked polyethylene bags, component B (Fibres HPC) 6.5 kg box with stiff metal fibres.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
EN 998-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-2
G-M15 MASONRY MORTAR
TECHNICAL DATA: Maximum size of aggregate: 1.5 mm. Mixing ratio: one 25 kg bag of component A (powder) with one drum of component B (liquid). Pot life of mix: approx. 1 h (at +20°C). Thickness applied: approx. 5 mm per coat. Classification: EN 998-2 as M15 masonry mortar and EN 998-1 as GP type render CS IV category. Application: with metal spreader or rendering machine. Consumption: approx. 1.8 kg/m² per mm of thickness. Packaging: component A (powder) 25 kg vacuumpacked polyethylene bags, component B (liquid) 5 kg drums.
CONTAINS
30%
RECYCLED RAW MATERIAL
Spindle for Mapei Steel Dry
Special spindle for inserting “MAPEI STEEL DRY AISI 316” spiral rods. Complete with adapter for SDS hammer drill for dry application.
TECHNICAL DATA: Diameter: 8 mm, 10 mm and 12 mm. Packaging: box with 1 spindle.
229
PRODUCTS FOR THERMAL INSULATION
24. PRODUCTS FOR THERMAL INSULATION
Mapetherm AR1
One-component cementitious mortar for bonding and levelling insulation panels and for thermal insulation systems.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
ETA 04/0061 ETA 10/0024 ETA 10/0025
GP-CS IV RENDERING AND PLASTERING MORTAR
Mapetherm AR1 GG
One-component, large-grained cementitious mortar for bonding and levelling insulation panels and for thermal insulation systems. ETA 10/0024 ETA 10/0025
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
Mapetherm AR1 Light
One-component, lightweight, cementitious mortar for bonding and skimming insulating panels and thermal insulation systems.
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
Mapetherm AR1 Maxi NEW
One-component cementitious mortar with increased grain size for bonding and smoothing of thermal insulating panels and for external thermal insulation systems.
232
EN 998-1 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 998-1
GP-CS IV RENDERING AND PLASTERING MORTAR
TECHNICAL DATA: Consistency: powder. Colour: grey. Density of the mix (kg/m³): 1,450. Application temperature range: from +5°C to +35°C. Mixing ratio: 21-24% with water (by weight). Cleaning: water. Storage: 12 months. Application: trowel. Consumption (kg/m²): – 4.0-6.0 kg/m² according to the bonding technique used; – 1.3-1.5 per mm of thickness when used as smoothing compound (recommended: approx. 4 mm in 2 coats). Packaging: 25 kg.
TECHNICAL DATA: Consistency: powder. Colour: grey and white Density of the mix (kg/m³): 1,400. Application temperature range: from +5°C to +35°C. Mixing ratio: 21-24% with water (by weight). Cleaning: water. Storage: 12 months. Application: trowel. Consumption (kg/m²): – 4.0-6.0 kg/m² depending on bonding technique; – 1.35-1.55 kg/m² per mm of thickness when used as smoothing compound (recommended: approx. 4 mm in 2 coats). Packaging: 25 kg.
TECHNICAL DATA: Consistency: powder. Colour: white. Density of the mix (kg/m³): 1,300. Application temperature range: from +5°C to +35°C. Mixing ratio: 29-31% with water (by weight). Cleaning: water. Storage: 12 months. Application: trowel. Consumption: – 3.0-5.0 kg/m² according to the bonding technique used; – 1.20-1.40 kg/m² per mm of thickness when used for skimming (recommended: approx. 4 mm). Packaging: 23 kg.
TECHNICAL DATA: Consistency: powder. Colours: white and grey. Density of mix (kg/m³): 1500. Application temperature range: from +5°C to +35°C. Mixing ratio: 24-27% with water by weight. Cleaning: water. Storage: 12 months. Application: trowel. Consumption: – 4,0-6,0 kg/m² depending on the bonding technique. – 1,35-1,55 kg/m² per mm of thickness as smoothing compound (recommended: approx. 4mm in 2 coats). Packaging: 25 kg
Mapetherm Ba
Aluminium starting profiles with drip channel, available in sizes 4, 5, 6, 8 and 10 cm.
Mapetherm Cork
Cork insulating panels for thermal insulation systems.
Mapetherm Dripnose Bead
PVC corner profile with drip channel and 10 cm wide alkali-resistant glass fibre mesh for door and window openings. May be used as a drip channel for balconies and projecting features.
Mapetherm EPS
Extruded sintered polystyrene insulating panels for thermal insulation systems. ETA 10/0025
TECHNICAL DATA: Composition: aluminium. Colour: grey. Dimensions m: 2.50. Packaging: packages of 20 pieces.
TECHNICAL DATA: Composition: expanded cork. Colour: brown. Thickness available mm: 40, 50, 60, 80 and 100. Dimensions of panel mm: 1000 x 500. Packaging: from 1.5 to 4 m² (according to the thickness).
TECHNICAL DATA: Composition: PVC. Colour: white. Dimensions m: 2.50. Packaging: packs of 20 profiles.
TECHNICAL DATA: Composition: sintered expanded polystyrene. Colour: white. Thickness available cm: 4, 5, 6, 8 and 10. Dimensions of panel cm: 100 x 50. Packaging: from 3 to 7.5 m² (according to the thickness).
233
24. PRODUCTS FOR THERMAL INSULATION
Mapetherm FIX
Stud for fixing insulating panels and composite insulating systems in place, with a plug with a metal/nylon pin and polypropylene body.
TECHNICAL DATA: Composition: synthetic material with zinc-plated steel nail. Colour: grey. Sizes available mm: 108, 128, 148. Packaging: boxes of 100 pieces.
ETA 09/0394
Mapetherm FIX 9 Polyprpoylene fastener.
Mapetherm FIX B Nylon self-tapping studs in zinc/chrome-plated steel.
Mapetherm Flex RP
Cement-free, fibre-reinforced, lightweight elastic flexible skimming paste resistant to biological agents for internal and external use. Available in the following granulometries: 0.5 mm and 1.5 mm.
234
TECHNICAL DATA: Composition: polypropylene. Colour: grey. Sizes available mm: 83. Packaging: boxes of 500 pieces.
TECHNICAL DATA: Composition: nylon and zinc/chrome-plated steel. Colour: grey. Sizes available mm: 45. Packaging: boxes of 100 pieces.
TECHNICAL DATA: Consistency: paste. Colour: white or various colours using the ColorMap® automatic colouring system. Density (g/cm³): approx. 1.45-1.50 (according to grain size). Application temperature (of the substrate and the air): from +5°C to +35°C. Cleaning: water. Storage: 24 months. Consumption: – 0.5 mm: 1.9-2.1 kg/m² per 1 mm of thickness; – 1.5 mm: 4.0-5.0 kg/m² per 1 mm of thickness. Packaging: 20 kg drums.
Mapetherm M. Wool
High-density, glass wool insulating panels for thermal insulation systems. ETA 10/0024
Mapetherm Net
Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when repairing façades, or for the execution of MAPETHERM thermal insulation systems.
TECHNICAL DATA: Composition: high density glass wool. Colour: yellow. Thickness available cm: 4, 5, 6, 8 and 10. Dimensions of panel cm: 120 x 60. Packaging: from 2.88 to 7.2 m² (according to the thickness).
TECHNICAL DATA: Composition: 100% glass fibre. Colour: white. Mesh size (mm): 4.15 x 3.8. Weight of primed mesh (g/m²): approx. 150. Storage: unlimited. Packaging: 50x1 m rolls.
ETA 10/0024 ETA 10/0025 ETA 04/0061
Mapetherm Profil
Pre-mounted aluminium angle iron incorporated with alkali-resistant glass fibre mesh.
Mapetherm Profil Ba
PVC profile with drip channel and 10 cm wide alkali-resistant glass fibre mesh for MAPETHERM Ba starter profiles.
TECHNICAL DATA: Composition: aluminium: Colour: grey. Dimensions m: 2.50. Packaging: boxes of 50 pieces.
TECHNICAL DATA: Composition: PVC. Colour: white. Dimensions m: 2.50. Packaging: packs of 25 profiles.
235
24. PRODUCTS FOR THERMAL INSULATION
Mapetherm Profil E
PVC profile with 10 cm wide alkaliresistant glass fibre mesh and a flexible membrane for flat expansion joints.
Mapetherm Profil V
PVC profile with 10 cm wide alkaliresistant glass fibre mesh and a flexible membrane for corner expansion joints.
Mapetherm Profil W
Adhesive PVC profile with 10 cm wide alkali-resistant glass fibre mesh and a flexible membrane for the inside edge of window openings.
236
TECHNICAL DATA: Composition: PVC. Colour: white. Dimensions m: 2.50. Packaging: packs of 25 profiles.
TECHNICAL DATA: Composition: PVC. Colour: white. Dimensions m: 2.50. Packaging: packs of 25 profiles.
TECHNICAL DATA: Composition: PVC. Colours: white. Dimensions m: 2.40. Packaging: packs of 30 profiles.
237
PRODUCTS FOR TREATING ASBESTOS CEMENT SLABS
25. PRODUCTS FOR TREATING ASBESTOS CEMENT SLABS
Vinavil 03V
Specially for asbestos Temporary encapsulation of asbestos-cement panels.
240
TECHNICAL DATA: Consistency: fluid liquid. Colour: red. Density (EN ISO 2811-1) (g/cm³): approx. 1.08. Dry solids content (EN ISO 3251) (%): approx. 50. Dilution rate: ready to use; 25% of water if applied by pump. Waiting time before applying other products: 1- 2 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or pump. Consumption: approx. 0.2-0.3 kg/m². Packaging: 5, 10 and 25 kg.
241
WALL PROTECTIVE AND DECORATIVE COATINGS
26. WALL PROTECTIVE AND DECORATIVE COATINGS
Antipluviol
Drop Effect
High-performance, silicone waterrepellent in watery solution for external walls.
Antipluviol S
Ultra high-performance, transparent, siloxane resin water-repellent impregnator.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (H) PRINCIPLES
PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Drop Effect
Antipluviol W
Drop Effect
Transparent, silane and siloxane waterrepellent impregnator in watery solution.
Colorite Beton
Semi-transparent, anti-carbonatation acrylic paint with a smooth finish for internal and external surfaces.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
244
TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.02. Dry solids content (EN ISO 3251) (%): approx. 5. Dilution rate: supplied ready to use. Surface drying time: 1-2 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.2-1 kg/m² (according to the porosity of the substrate). Packaging: 5 and 25 kg.
TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 0.8. Active substance content (%): 9. Dilution rate: supplied ready to use. Surface drying time: 1 hour. Application temperature range: from +5°C to +35°C. Cleaning: solvent (benzene, white spirit, etc.). Storage: 24 months. Application: roller, brush or spray. Consumption: 0.1-1 kg/m² (according to the porosity of the substrate). Packaging: 5 and 10 kg.
TECHNICAL DATA: Consistency: fluid liquid. Colour: milky. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Active substance content (%): 8. Dilution rate: supplied ready to use. Surface drying time: 1-2 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.2-1 kg/m² (according to the porosity of the substrate). Packaging: 10 kg.
TECHNICAL DATA: Consistency: thick liquid. Colour: colours from the colour chart range or other colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.27. Dry solids content (EN ISO 3251) (%): approx. 59. Dilution rate: 10-15% of water. Recoat time: 24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.25-0.3 kg/m² (for two coats). Packaging: 20 kg.
Colorite Matt
TECHNICAL DATA: Consistency: thick liquid. Colour: white. Density (EN ISO 2811-1) (g/cm³): approx. 1.65. Dry solids content (EN ISO 3251) (%): approx. 65. Dilution rate: 15-20% of water. Recoat time: 6-12 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.3-0.4 kg/m² (for two coats of the product). Packaging: 5 and 20 kg.
Highly-transpirant water-based paint for internal use with excellent hiding power.
Colorite Performance
Protective acrylic paint with high resistance to UV rays for internal and external use, available in a wide range of colours.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Duresil EB
Two-component, anti-acid epoxy paint modified with hydro-carbide resin for protecting concrete and steel surfaces.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
PRINCIPLES
PI-MC-RC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Dursilac Base Filler Water based acrylic undercoat for interior and exterior use with high opacity and filling properties.
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.35. Dry solids content (EN ISO 3251) (%): approx. 61. Dilution rate: 10-15% of water. Recoat time: 12-24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.3-0.4 kg/m² (for two coats of the product). Packaging: 5 and 20 kg.
TECHNICAL DATA: Consistency: component A fluid paste, component B fluid paste. Colour: black and grey. Density (EN ISO 2811-1) (g/cm³): component A 1.75, component B 1.40. Dilution rate: ready to use. Complete hardening time: 7 days. Application temperature range: from +5°C to +30°C. Cleaning: nitro solvent or xylol. Storage: 12 months. Application: roller, brush or spray. Consumption: 0.4-0.45 kg/m² for approx. 250 µm thickness. (for one coat of the product). Packaging: 10 kg kits (A + B).
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.53. Dry solids content by weight (EN ISO 3251) (%): approx. 68. Dilution rate (% by volume): max 10% with water. Recoat time: 12 hours. Application temperature range: from +8°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Coverage: 6-8 m²/litre per coat. Packaging: 0.75 and 2.5 litres.
245
26. WALL PROTECTIVE AND DECORATIVE COATINGS
Dursilac Gloss
Water based acrylic urethane enamel paint for interior and exterior use, with excellent flow and providing a hardwearing. Gloss Finish.
Dursilac Matt
Water based acrylic urethane enamel paint for interior and exterior use, with excellent flow and providing a hardwearing Matt finish.
Dursilac No Rust
Anti-rust solvent-based primer, for internal and external application, with excelent adhesion and anti-corrosive power.
Dursilac Satin
Water based acrylic urethane enamel paint for interior and exterior use, with excellent flow and providing a hardwearing Satin finish.
246
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.22. Dry solids content by weight (EN ISO 3251) (%): approx. 56. Dilution rate (% by volume): max 15% with water. Recoat time: 6-8 hours. Application temperature range: from +8°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Coverage: 10-12 m²/litres per coat. Packaging: 0.75 and 2.5 litres.
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.30. Dry solids content by weight (EN ISO 3251) (%): approx. 62. Dilution rate (% by volume): max 15% with water. Recoat time: 6-8 hours. Application temperature range: from +8°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Coverage: 10-12 m²/litre per coat. Packaging: 0.75 and 2.5 litres.
TECHNICAL DATA: Consistency: thick liquid. Colour: grey. Density (EN ISO 2811-1) (g/cm³): approx. 1.58 Dry solids content by weight (EN ISO 3251) (%): approx. 84. Dilution rate (% by volume): max 10% with white spirit or synthetic thinner. Recoat time: 12 hours. Application temperature range: from +5°C to +30°C. Cleaning: white spirit. Storage: 24 months. Application: roller, brush or spray. Coverage: 6-8 m²/litter per coat. Packaging: 0.75 and 2.5 litres.
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.18. Dry solids content by weight (EN ISO 3251) (%): approx. 57. Dilution rate (% by volume): max 15% with water. Recoat time: 6-8 hours. Application temperature range: from +8°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Coverage: 10-12 m²/litre per coat. Packaging: 0.75 and 2.5 litres.
Dursilite
Washable water-based paint with low dirt pick-up and excellent washability for internal walls.
Dursilite Base Coat
Coloured smooth acrylic base coat, with a smooth finish and adhesion promoting properties.
Dursilite Gloss
Semi-gloss enamel wall paint for internal surfaces; long-lasting, high quality, stain-resistant finish.
Dursilite Matt
Transpirant, high opacity, washable water-based wall paint for internal use.
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.50. Dry solids content (EN ISO 3251) (%): approx. 65. Dilution rate: 15-20% of water. Recoat time: 6-12 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.3-0.4 kg/m² (for two coats of the product). Packaging: 5 and 20 kg.
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.650. Dry solids content (EN ISO 3251) (%): approx. 68. Dilution rate: ready to use or diluted with 5% water. Recoat time: at least 24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: brush, roller or spray. Consumption: 0.2-0.4 kg/m² per coat. Packaging: 5 and 20 kg.
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.30. Dry solids content (EN ISO 3251) (%): approx. 55. Dilution rate: 0-10% of water. Recoat time: 6-12 hours. Application temperature: +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: brush, roller or spray. Consumption: 0.2-0.3 kg/m² (for two coats of product). Packaging: 4 and 16 kg.
TECHNICAL DATA: Consistency: thick liquid. Colours: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.60. Dry solids content (EN ISO 3251) (%): approx. 65. Dilution rate: 15-20% of water. Recoat time: 6-12 hours. Application temperature range: from +5°C to +35°C. Cleaning: water Storage: 24 months. Application: brush, roller or spray. Consumption: 0.3-0.4 kg/m² (for two coats of product). Packaging: 5 and 20 kg.
247
26. WALL PROTECTIVE AND DECORATIVE COATINGS
Dursilite Plus
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.60. Dry solids content (EN ISO 3251) (%): approx. 65. Dilution rate: 15-20% of water. Application temperature range: from +5°C to +35°C. Recoat time: 6-12 hours. Cleaning: water. Storage: 24 months. Application: brush, roller or spray. Consumption: 0.3-0.4 kg/m² (for two coats of product). Packaging: 5 and 20 kg.
Hygienising, washable and traspirant wall paint which is resistant to mould, for internal surfaces.
Elastocolor Net
TECHNICAL DATA: Composition: 100% glass fibre. Colour: white. Mesh size (mm): 2.7 x 2.7. Weight of primed mesh (g/m²): approx. 61. Storage: unlimited. Packaging: 50 x 1 m rolls.
Alkali-resistant glass fibre mesh for reinforcing fine-graded skimming pastes.
Elastocolor Paint
Elastomeric, crack-bridging, permanently flexible, protective paint with high resistance to chemicals for internal and external surfaces.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Elastocolor Paint Plus
Elastomeric hygenic paint with crackbridging ability, for internal and external use, with long-lasting elasticity and mould and algae resistant.
248
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
PRINCIPLES
PI-MC-PR-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.37. Dry solids content (EN ISO 3251) (%): approx. 63. Dilution rate: 10-15% of water. Recoat time: 12-24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.2-0.4 kg/m² per coat. Packaging: 20 kg.
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.37. Dry solids content (EN ISO 3251) (%): approx. 63. Dilution rate: 10-15% of water. Recoat time: 12-24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.2-0.4 kg/m² for coat. Packaging: 20 kg.
Elastocolor Primer
TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 0.96. Dry solids content (EN ISO 3251) (%): approx. 10. Dilution rate: ready to use. Waiting time before applying other products: 5-6 hours. Application temperature range: from +5°C to +35°C. Cleaning: nitro thinners. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.10-0.15 kg/m². Packaging: 10 kg.
Solvent-based high-penetration consolidating primer to even out surfaces.
Elastocolor Rasante
Fibre-reinforced, elastomeric, high flexibility finishing product with good defect covering capacity, for internal and external applications.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Elastocolor Rasante SF
Fibre-reinforced elastomeric, thick-layered finishing product with high filling properties, for internal and external surfaces.
Elastocolor Tonachino Plus
Elastic, water-repellent, mildew and mould-resistant, hygienising, elastomeric coating product for internal and external surfaces. Available in the following grain sizes: 1.2 mm.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
EN 15824 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 15824
V2 W3 A2-s1 d0 EXTERNAL AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.35. Dry solids content (EN ISO 3251) (%): approx. 67. Dilution rate: as it is or diluted with 5-10% of water. Recoat time: 24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush, trowel or spray. Consumption: – trowel: 0.3-0.4 g/m² per coat; – brush or roller: approx. 0.4 g/m² per coat; – spray 0.4-0.7 g/m² per coat. Packaging: 20 kg.
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.47. Dry solids content (EN ISO 3251) (%): approx. 77. Dilution rate: as it is or diluted with 5-10% of water. Waiting time between each coat: 24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: trowel, roller, brush or spray. Consumption: – trowel: 0.7-0.8 g/m² per coat; – brush or roller: approx. 0.5 g/m² per coat; – spray 0.8-1.0 g/m² per coat. Packaging: 20 kg.
TECHNICAL DATA: Consistency: paste. Colours: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.70. Dry solids content (EN ISO 3251) (%): approx. 83. Dilution rate: ready to use (it can be diluted with 1-2% of water). Recoat time: 12-24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: trowel. Consumption: 1.2 mm: 1.9-2.3 kg/m². Packaging: 20 kg.
Drop Effect
249
26. WALL PROTECTIVE AND DECORATIVE COATINGS
Elastocolor Waterproof Waterproof, easy-to-clean acrylic paint for internal and external surfaces in permanent contact with water.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Malech
TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids content (EN ISO 3251) (%): approx. 15. Dilution rate: ready to use; 30-50% of water for surfaces with low absorbency. Waiting time before applying other products: 12-24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: brush, roller or spray. Consumption: 0,10-0,15 kg/m². Packaging: 2 and 10 kg.
Acrylic resin undercoat in water dispersion to even out the absorption of substrates before applying other products.
Mapecoat ACT 021
Enamel wall paint with high cleanability and resistance to mould for internal surfaces in areas with food and beverages.
Mapecoat ACT 196
Highly washable, enamel wall paint with excellent cleanability and resistance to bacteria for internal surfaces in healthcare facilities.
250
TECHNICAL DATA: Consistency: thick liquid. Colour: colours from the colour chart range using the ColorMap® automatic colouring system Density (EN ISO 2811-1) (g/cm³): approx. 1.18. Dry solids content (EN ISO 3251) (%): approx. 59. Dilution rate: diluted with 5-10% of water. Recoat time: 24 hours. Application temperature range: from +10°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller or brush (spray only for structures which are not immersed in water). Consumption: – 0.3-0.5 kg/m² (for two coats of the product) for structures which are not immersed in water; – 0.6-0.8 kg/m² (for two/three coats of the product) for structures which are immersed in water. Packaging: 20 kg.
COMPLIANT WITH NORM
UNI 11021 TESTS PASSED 7.1 and 7.2 8.1, 8.2, 8.3, 8.4, 8.5, 8.6
SYSTEMS FOR PAINTING AREAS WHERE FOOD AND DRINK ARE PRESENT
TESTED according to
ISO 22196 Determination of the Antibacterial Activity of a Painted surface
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1)(g/cm³): 1.20. Dry solids content (EN ISO I3251) (%): approx. 57. Dilution rate: 0-10% of water. Re-coat time: 6-12 hours. Application temperature: +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: brush, roller or spray. Consumption: 0.2-0.3 kg/m² for two coats. Packaging: 4 and 16 kg.
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1)(g/cm³): 1.20. Dry solids content (EN ISO I3251) (%): approx. 57. Dilution rate: 0-10% of water. Re-coat time: 6-12 hours. Application temperature: +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: brush, roller or spray. Consumption: 0.2-0.3 kg/m² for two coats. Packaging: 4 and 16 kg.
Mapecoat DW 25
Two-component epoxy paint for anti-acid and non-toxic coatings on concrete surfaces, suitable for contact with drinking water.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
PRINCIPLES
PI-MC-PR-RC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Mapecoat W
Two-component, epoxy paint in water dispersion for protecting cementitious substrates.
Quarzolite Base Coat Coloured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces. ETA 10/0024 ETA 10/0025
Quarzolite HF Plus
Acrylic hygienising paint with granular quartz fillers for internal and external use, durable with filling properties, resistant to mould and algae.
TECHNICAL DATA: Consistency: component A: thick paste, component B: fluid paste. Colour: component A: white, component B: transparent. Density (EN ISO 2811-1) (g/cm³): component A 1.43, component B 1.003. Dilution rate: supplied ready to use. Recoat time: 6-24 hours. Complete hardening time: 7 days. Application temperature range: from +5°C to +30°C. Cleaning: ethanol. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.4-0.6 kg/m² (for one coat of the product). Packaging: 5 kg kits (A + B).
TECHNICAL DATA: Consistency: component A fluid paste, component B thick paste. Colour: component A transparent, component B white or grey. Density (EN ISO 2811-1) (g/cm³): component A 1.15, component B 1.35. Dilution rate: supplied ready to use or 5-10% of water. Recoat time: 6-24 hours. Complete hardening time: 8-10 days. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 12 months. Application: roller, brush or spray. Consumption: 0.25-0.3 kg/m² (for one coat of the product). Packaging: 20 kg kits (A + B).
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.58. Dry solids content (EN ISO 3251) (%): approx. 67. Dilution rate: as it is or diluted with 5-10% of water. Recoat time: 24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.3-0.5 kg/m² per coat. Packaging: 20 kg.
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.58 g/cm³. Dry solids content (EN ISO 3251): 70%. Dilution rate: 10-15% of water. Recoat time: at least 24 hours. Application temperature: +5°C to +35°C. Cleaning: water. Application: brush, roller or spray. Consumption: 0.35-0.45 (for two coats of product). Packaging: 20 kg.
251
26. WALL PROTECTIVE AND DECORATIVE COATINGS
Quarzolite Paint
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.55. Dry solids content (EN ISO 3251) (%): approx. 66. Dilution rate: 15-20% of water. Recoat time: 24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.3-0.4 kg/m² for two coats. Packaging: 5 and 20 kg.
Acrylic paint with micro-granular quartz with a smooth finish for long-lasting protection of internal and external surfaces.
Quarzolite Tonachino
High-protection, thick-layered acrylic coating product with high filling properties for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm and 2.0 mm.
EN 15824 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 15824
V2 W3 A2-s1 d0 EXTERNAL AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS
ETA 10/0024 ETA 10/0025
Quarzolite Tonachino Plus
Highly protective, mould and mildewresistant acrylic coating product with, for internal and external surfaces. Available in the following granulometries: 1.2 mm and 1.5 mm.
Silancolor AC Paint
Water-repellent acrylic-siloxane paint with high resistance to UV rays for internal and external surfaces.
252
EN 15824 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 15824
V2 W3 A2-s1 d0 EXTERNAL AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS
TECHNICAL DATA: Consistency: paste. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.65-1.95 (according to the grain size). Dry solids content (EN ISO 3251) (%): approx. 85. Dilution rate: supplied ready to use (it can be diluted with 1-2% of water). Recoat time: 24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: trowel. Consumption: – 0.7 mm: 1.7-2.0 kg/m²; – 1.2 mm: 1.9-2.3 kg/m²; – 1.5 mm: 2.2-2.6 kg/m²; – 2.0 mm: 3.0-3.5 kg/m². Packaging: 20 kg.
TECHNICAL DATA: Consistency: paste. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.55-1.85 (according to the grain size). Dry solids content (EN ISO 3251) (%): approx. 85. Dilution rate: supplied ready to use (it can be diluted with 1-2% of water). Recoat time: 24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: trowel. Consumption: – 1.2 mm: 1.9-2.3 kg/m²; – 1.5 mm: 2.2-2.6 kg/m². Packaging: 20 kg.
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.55. Dry solids content (EN ISO 3251-1) (%): approx. 66. Dilution rate: 10-15% of water. Recoat time: 24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.3-0.4 kg/m² (for two coats of the product). Packaging: 20 kg.
Silancolor AC Paint Plus
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.55. Dry solids content (EN ISO 3251): approx. 66. Dilution rate: 10-15% of water. Recoat time: 12-24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.3-0.4 kg/m² (per two coats). Packaging: 20 kg.
Acryl-siloxane paint for the hygiene of walls in internal and external applications, water repellent, mould and algae resistent.
Silancolor AC Tonachino
Water-repellent, thick-layered acrylicsiloxane coating with high filling properties for internal and external surfaces. Available in the following granulometries: 1.2 mm.
Silancolor AC Tonachino Plus
Acryl-siloxane plaster for the hygiene of walls in internal and external applications, water repellent, mould and algae resistant. Available in the following grain sizes: 1.2 mm.
Silancolor Base Coat
Water-repellent, coloured siloxane undercoat with a smooth finish and good filling properties for internal and external surfaces. ETA 10/0024 ETA 10/0025
EN 15824 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 15824
V1 W3 A2-s1 d0 EXTERNAL AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS
EN 15824 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 15824
V1 W3 A2-s1 d0 EXTERNAL AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS
TECHNICAL DATA: Consistency: paste. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.70. Dry solids content (EN ISO 3251-1) (%): approx. 80. Dilution rate: supplied ready to use (it can be diluted with 1-2% of water). Recoat time: 12-24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: trowel. Consumption: 1.2 mm: 1.9-2.3 kg/m². Packaging: 20 kg.
TECHNICAL DATA: Consistency: paste Colour: white or various colours using the ColorMap® automatic colouring system Density (EN ISO 2811-1) (g/cm³): approx. 1.70. Dry solids content (EN ISO 3251): approx. 80. Dilution rate: ready to use. Recoat time: 12-24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: trowel. Consumption: 1.9-2.3 kg/m². Packaging: 20 kg.
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.58. Dry solids content (EN ISO 3251) (%): approx. 67. Dilution rate: supplied ready to use (it can be diluted with 5-10% of water). Recoat time: 24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.3-0.5 kg/m² per coat. Packaging: 20 kg.
253
26. WALL PROTECTIVE AND DECORATIVE COATINGS
Silancolor Base Coat Plus
Drop Effect
Hygienising siloxane based pigmented base coat, for internal and external application, evens out the surfaces and mould and algae resistant.
Silancolor Cleaner Plus
TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dilution rate: ready-to-use or diluted max 300% with water. Waiting time before applying other products: 12-24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: low-pressure manual spray gun or brush. Consumption: 0.2-1 kg/m² (ready-to-use solution). Packaging: 1 and 5 kg.
High penetration and mould-and algae resistant hygienising treatment.
Silancolor Paint
Drop Effect
Transpirant, water-repellent, siloxane paint resistant to aggressive environments for internal and external surfaces.
Silancolor Paint Plus
Highly protective transpirant, waterrepellent, mildew and mould-resistant, siloxane paint for internal and external surfaces.
254
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.60. Dry solids content (EN ISO 3251) (%): approx. 68. Dilution rate: ready to use or diluted up to 10% of water. Recoat time: 12-24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.2-0.3 kg/m² per coat. Packaging: 20 kg.
Drop Effect
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.58. Dry solids content (EN ISO 3251) (%): approx. 65. Dilution rate: 15-25% of water. Recoat time: 24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.3-0.4 kg/m² for two coats. Packaging: 5 and 20 kg.
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.55. Dry solids content (EN ISO 3251) (%): approx. 65. Dilution rate: 15-20% of water. Recoat time: 24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.3-0.4 kg/m² (for two coats of the product). Packaging: 5 and 20 kg.
Silancolor Primer
TECHNICAL DATA: Consistency: fluid liquid. Colour: milky. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids content (EN ISO 3251) (%): approx. 12. Dilution rate: supplied ready to use. Waiting time before applying other products: 12-24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.1-0.15 kg/m². Packaging: 10 kg.
Transpirant siloxane undercoat with a smooth finish.
Silancolor Primer Plus
Drop Effect
Highly protective siloxane, mildew and mould-resistant primer.
Silancolor Tonachino
Transpirant, water-repellent, thicklayered siloxane coating product with high filling properties for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm and 2.0 mm. ETA 10/0024 ETA 10/0025
Silancolor Tonachino Plus
Highly protective transpirant, waterrepellent, mildew and mould-resistant siloxane coating product for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm and 1.5 mm.
EN 15824 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 15824
V1 W3 A2-s1 d0 EXTERNAL AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS
Drop Effect
EN 15824 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 15824
V1 W3 A2-s1 d0 EXTERNAL AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS
Drop Effect
TECHNICAL DATA: Consistency: fluid liquid. Colour: milky. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids content (EN ISO 3251) (%): approx. 5. Dilution rate: supplied ready to use. Waiting time before applying other products: 24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: roller, brush or spray. Consumption: 0.1-0.3 kg/m². Packaging: 2 and 10 kg.
TECHNICAL DATA: Consistency: paste. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.65-1.95 (according to the grain size). Dry solids content (EN ISO 3251) (%): approx. 80. Dilution rate: supplied ready to use (it can be diluted with 1-2% of water). Recoat time: 24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 24 months. Application: trowel. Consumption: – 0.7 mm: 1.7-2.0 kg/m²; – 1.2 mm: 1.9-2.3 kg/m²; – 1.5 mm: 2.2-2.6 kg/m²; – 2.0 mm: 3.0-3.5 kg/m². Packaging: 20 kg.
TECHNICAL DATA: Consistency: paste. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.65-1.90 (according to the grain size). Dry solids content (EN ISO 3251) (%): approx. 80. Dilution rate: supplied ready to use (it can be diluted with 1-2% of water). Recoat time: 12-24 hours. Application temperature range: from +5°C to +35°C. Cleaning: water. Storage: 12-24 months. Application: trowel. Consumption: – 0.7 mm: 1.7-2.0 kg/m²; – 1.2 mm: 1.9-2.3 kg/m². – 1.5 mm: 2.2-2.6 kg/m². Packaging: 20 kg.
255
26. WALL PROTECTIVE AND DECORATIVE COATINGS
Silexcolor Base Coat
Transpirant, coloured silicate undercoat with a smooth finish and good filling properties for internal and external surfaces, according to DIN 18363 Standards. ETA 10/0024 ETA 10/0025
Silexcolor Marmorino
Highly-decorative, fine-grained, silicate mineral coating product in paste form with high chemical resistance for internal and external surfaces, according to DIN 18363 Standards.
Silexcolor Paint
Highly-transpirant silicate paint with a high chemical bond for internal and external surfaces, according to DIN 18363 Standards.
Silexcolor Primer
Highly breathable silicate primer compliant with DIN 18363 standards. ETA 04/0061
256
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.60. Dry solids content (EN ISO 3251) (%): approx. 67. Dilution rate: as is or 5-10% of SILEXCOLOR PRIMER. Recoat time: 24 hours. Application temperature range: from +8°C to +35°C. Cleaning: water. Storage: 12 months. Application: roller, brush or spray. Consumption: 0.3-0.5 kg/m² per coat. Packaging: 20 kg.
TECHNICAL DATA: Consistency: paste. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.61. Dry solids content (EN ISO 3251) (%): approx. 67. Dilution rate: supplied ready to use. Recoat time: 12 hours. Application temperature range: from +8°C to +35°C. Cleaning: water. Storage: 12 months. Application: trowel. Consumption: 0.8-1.0 kg/m² (according to the type of finish required). Packaging: 5 and 20 kg.
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.46. Dry solids content (EN ISO 3251) (%): approx. 55. Dilution rate: 20% of SILEXCOLOR PRIMER. Recoat time: 24 hours. Application temperature range: from +8°C to +35°C. Cleaning: water. Storage: 12 months. Application: roller, brush or spray. Consumption: 0.35-0.45 kg/m² for two coats. Packaging: 20 kg.
TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.1. Dry solids content (EN ISO I3251) (%): approx. 17. Dilution rate: supplied ready to use. Waiting time before applying other products: 12-24 hours. Application temperature range: from +8°C to +35°C. Cleaning: water. Storage: 12 months. Application: roller, brush or spray. Consumption: 0.1-0.15 kg/m². Packaging: 10 kg.
Silexcolor Tonachino
Highly transpirant, thick-layered silicate coating product with high filling properties for internal and external surfaces in compliance with DIN 18363. Available in the following granulometries: 0.7 mm,1.2 mm, 1.5 mm and 2.0 mm. ETA 04/0061 ETA 10/0024 ETA 10/0025
EN 15824 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 15824
V1 W2 A2-s1 d0 EXTERNAL AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS
TECHNICAL DATA: Consistency: paste. Colour: white or various colours using the ColorMap® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.65-1.95 (according to the grain size). Dry solids content (EN ISO 3251) (%): approx. 80. Dilution rate: supplied ready to use (it can be diluted with 3-5% of SILEXCOLOR PRIMER). Recoat time: 24 hours. Application temperature range: from +8°C to +35°C. Cleaning: water. Storage: 12 months. Application: trowel. Consumption: – 0.7 mm: 1.7-2.0 kg/m²; – 1.2 mm: 1.9-2.3 kg/m²; – 1.5 mm: 2.2-2.6 kg/m²; – 2.0 mm: 3.0-3.5 kg/m². Packaging: 20 kg.
257
WATERPROOFING SYSTEMS
27. WATERPROOFING SYSTEMS 27.1 Waterproofing structures below ground level_____________________________________________________
Idrosilex
Bulk powder or liquid water-repellent for cementitious mortar.
Lamposilex
Ultra quick-setting and hardening hydraulic binder for blocking seeping water.
Mapegel 50
Three-component hydrophilic gel for consolidating the ground and for injecting concrete barriers.
Mapei Waterproofer
Waterproofing agent for render and normal-setting waterproofing mixes.
260
TECHNICAL DATA: Consistency: powder or liquid. Pot life of mix: approximately 1 hour. Storage: 12 months. Consumption: – IDROSILEX LIQUID: 3-5 kg/m² every 100 kg of cement; – IDROSILEX POWDER: 2-4 kg/m² every 100 kg of cement. Packaging: – IDROSILEX LIQUID: 6 and 25 kg drums; 12x1 kg boxes; – IDROSILEX POWDER: boxes of 25x1 kg.
TECHNICAL DATA: Consistency: fine powder. Workability time at +20°C: approximately 1 minute. Storage: 12 months. Mixing ratio: 100 g of LAMPOSILEX with 28 g of water. Minimum application temperature: +5°C. Consumption: 1.8 kg/dm³ of cavities to be filled. Packaging: 5 kg drums.
TECHNICAL DATA: Consistency: comp A (liquid), comp B (liquid), comp C (solid). Viscosity of mix (mPa·s): < 5. Storage: 12 months at a temperature of between +10°C and +30°C. Mixing ratio: comp A : (comp B/water) : comp C (weight) = 20 : (1/20) : 0.3. Consumption: approximately 1 kg/l (of cavities to be filled). Packaging: 21.3 kg kits: – comp A 20 kg; – comp B 1 kg; – comp C 0.3 kg.
TECHNICAL DATA: Consistency: thick liquid. Colour of mix: white. Application temperature: +5°C to +35°C. Dosage: 3% by weight of mix. Packaging: 5 kg drums.
Mapelastic Foundation
Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift.
EN 1504-2
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
EN 14891
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 14891
CMO1P
TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp. B = 2.2 : 1. Pot life of mix: approximately 1 hour (at +20°C). Application temperature range: from +5°C to +40°C. Minimum applicable thickness: 2 mm in 2 coats. Classification: EN 1504-2 - coating (C) principles PI, MC and IR and EN 14891 norm. EMICODE: EC1R Plus - very low emission. Storage: 12 months. Application: roller or spray. Consumption: – by roller: 1.65 kg/m² per mm of thickness; – by spray: 2.2 kg/m² per mm of thickness. Packaging: 32 kg kits: – component A: 22 kg bags; – component B: 10 kg tanks.
LIQUID-APPLIED WATER IMPERMEABLE PRODUCTS
Mapeproof
Bentonite waterproofing sheets for structures below ground level, suitable for both horizontal and vertical surfaces.
Mapeproof BA Tape
Watertight, doublesided adhesive sheet membrane which are placed along fillet joints between horizontal and vertical surfaces and between adjacent vertical surfaces in MAPEPROOF FBT waterproofing systems.
Mapeproof CD
Washers used to fasten MAPEPROOF bentonite sheets in place.
EN 13361 EN 13362 EN 13491
TECHNICAL DATA: Lower layer of geo-textile fabric: polypropylene fabric, 140 g/m². Upper layer of geo-textile fabric: non-woven polypropylene fabric, 220 g/m². Layer of bentonite: natural sodium. Aeric mass of bentonite (EN 14196) (12% humidity): 5.1 kg/m². Swelling index (ASTM D 5890): 28 ml/2 g. Coefficient of permeability (ASTM D 5887): < 1E-11 m/s. Static perforation (EN ISO 12236): 2400 N. Longitudinal tensile strength (EN ISO 10319): 14.0 kN/m. Transversal tensile strength (EN ISO 10319): 14.0 kN/m. Peeling (ASTM D 6496): 600 N/m. Bond strength to concrete (ASTM D 903): 3.5 N/mm. Thickness of product (EN 964-1): 6.5 mm. Seal of overlaps: the geo-composite product is self-sealing. Packaging: 1.1 m x 5 m rolls; 2.5 m x 22.5 m rolls; 5 m x 40 m rolls.
TECHNICAL DATA: Width: 330 mm. Thickness: 1.75 mm. Weight: ≥ 1.70 kg/m². Storage: 12 months. Packaging: 20 m rolls.
TECHNICAL DATA: Packaging: boxes of 500 pieces.
261
27. WATERPROOFING SYSTEMS
Mapeproof FBT
Synthetic fully-bonded waterproof sheet membrane, laminated with non-woven fabric for waterproofing underground structures.
EN 13967
Mapeproof FBT Tape
TECHNICAL DATA: Width: 150 mm. Thickness: 1.2 mm. Weight: ≥ 1.15 kg/m². Storage: 12 months. Packaging: 20 m² rolls.
Adhesive tape to form sealed joints over the top of adjacent sheets of MAPEPROOF FBT SYSTEM.
Mapeproof Fix Tape
TECHNICAL DATA: Width: 200 mm. Thickness: 0.61 mm. Weight: ≥ 0.67 kg/m². Storage: 12 months. Packaging: 25 m rolls.
Double-sided adhesive tape to hold sheets of MAPEPROOF FTB in place during installation.
Mapeproof LW
Bentonite waterproofing sheets for use on horizontal and vertical structures below ground level with a maximum water table of 5 metres.
262
TECHNICAL DATA: Width: 1000 mm. Thickness: 1.7 mm. Weight: ≥ 1.3 kg/m². Watertightness (no lateral migration) according to ASTM D 5385 mod. (bar): ≥ 7. Storage: 24 months. Packaging: pallets with 15 rolls (20 x 1 m).
EN 13361 EN 13362 EN 13491
TECHNICAL DATA: Lower layer of geo-textile fabric: polypropylene fabric, 120 g/m². Upper layer of geo-textile fabric: non-woven polypropylene fabric, 220 g/m². Layer of bentonite: natural sodium. Aeric mass of bentonite (EN 14196) (12% humidity): 4.1 kg/m². Swelling index (ASTM D 5890): 28 ml/2 g. Coefficient of permeability (ASTM D 5887): < 1E-11 m/s. Static perforation (EN ISO 12236): 2000 N. Longitudinal tensile strength (EN ISO 10319): 12.0 kN/m. Transversal tensile strength (EN ISO 10319): 12.0 kN/m. Peeling (ASTM D 6496): 600 N/m. Bond strength to concrete (ASTM D 903): 2.8 N/mm. Thickness of product (EN 964-1): 6.0 mm. Seal of overlaps: the geo-composite product is self-sealing. Packaging: – 2.5 m x 22.5 m rolls; – 5 m x 40 m rolls.
Mapeproof Mastic
TECHNICAL DATA: Density: 1.50 kg/dm³. Composition: – 50% natural sodium bentonite; – 50% non-toxic plasticising agents. Behaviour in water: the bentonite hydrates freely and swells. Behaviour in air: does not dry. Packaging: 15 kg drums.
Bentonite paste made from natural sodium bentonite and plasticising additives for sealing elements which pass through surfaces.
Mapeproof SA Tape
TECHNICAL DATA: Width: 200 mm. Thickness: 0.48 mm. Weight: 0.48 kg/m². Storage: 12 months. Packaging: 20 m rolls.
Adhesive tape to form sealed joints under adjacent sheets of MAPEPROOF FBT SYSTEM.
Mapeproof Seal
TECHNICAL DATA: Montmorillonite (XRD): > 95%. Free swelling (ASTM D 5890): > 27 ml/2 g. Fluid loss (ASTM D 5891): < 18 ml. Absorption of methylene blue: > 400 mg/g. Liquidity limit (UNI 10040): > 550%. Water absorption (ASTM E 946/43): > 750%. 1500/1000 Marsh viscosity: 38-40”. pH of filtered water: 9. Packaging: 25 kg paper bags.
Natural sodium bentonite in powder form for localised strengthening of waterproofing layers made using MAPEPROOF bentonite sheets.
Mapeproof SW
Bentonite sheet for waterproofing structures below ground level where saline water is present.
EN EN EN EN
13361 13362 13491 15382
TECHNICAL DATA: Lower layer: polypropylene fabric. Upper layer: non-woven polypropylene fabric. Layer of bentonite: natural sodium bentonite admixed with polymers resistant to contaminants. Areal density (EN 14196) (12% humidity): 5.3 kg/m². Swelling index (ASTM D 5890): 28 ml/2 g. Hydraulic conductivity (ASTM D 5887): 1E-11 m/s. Static puncture resistance (EN 12236): 2.4 kN. Longitudinal tensile strength (EN ISO 10319): 14.0 kN/m. Transversal tensile strength (EN ISO 10319): 14.0 kN/m. Peeling (ASTM D6496): 625 kN. Adhesion to concrete (ASTM D 903): 3.1 N/mm. Thickness of product (EN ISO 9863-1): 6.5 mm. Packaging: 5 m wide x 40 m long rolls.
263
27. WATERPROOFING SYSTEMS
Mapeproof Swell
TECHNICAL DATA: Consistency: thixotropic paste. Solubility: non-soluble in water. Dry solids content: 90%. Storage: 12 months. Application temperature range: from +5°C to +40°C. Volumetric expansion in water: minimum 100%. Formation of skin: 180-200 min. Polymerisation time: 2 mm every 9 hours. Consumption: approximately 320 ml every 3 metres. Shore A hardness (DIN 53505): 32. Elongation (DIN 53504): > 700%. Ultimate strength (DIN 53504): 2.5 N/mm². Modulus of elasticity at 100% elongation (DIN 53504): 0.55 N/mm². Tear strength (ISO 34-1): 10 N/mm. Water-tightness: 1 atm. Packaging: boxes containing 6 320 ml cartridges.
Hydro-expansive, rubber-based hydrophilic sealant paste in tubes, applied using an extrusion pistol.
Mapethene HT
Self-adhesive bitumen waterproofing membrane for underground structures suitable for application at temperatures up to +45°C.
EN 13967
EN 13969
TECHNICAL DATA: Width (mm): 1000. Thickness (mm) : 1.5. Weight (kg/m²): 1.5. Application temperature: from+10°C to +45°C. Impermeable to water (bar): 8. Packaging: 20 m² rolls.
EN 14967
Mapethene LT
Self-adhesive bitumen waterproofing membrane for underground structures suitable for application at temperatures down to -5°C.
EN 13969
EN 14967
Mapethene Primer
Solvent-free bitumen primer for membranes from the MAPETHENE line.
264
TECHNICAL DATA: Width (mm): 1000. Thickness (mm) : 1,5. Weight (kg/m²): 1,5. Application temperature: from -5°C to +20°C. Impermeable to water (bar): 8. Packaging: 20 m² rolls.
TECHNICAL DATA: Consistency: fluid. Colour: black. Density (kg/m³): 1.00. Dry solids content (%): 42. Viscosity (mPa·s): 12,000 (ago 5, 20 RPM). Application temperature: from -5°C to +40°C. Drying time (min): approx. 45. Consumption: 0.1-0.2 kg/m². Packaging: 10 kg drums.
Mapethene Primer W
TECHNICAL DATA: Consistency: fluid. Colour: black. Density (kg/m³): 1.00. Dry solids content (%): 49. Viscosity (mPa·s): 12,000 (ago 5, 20 RPM). Appication temperature: from -5°C to +40°C. Drying time (min): approx. 45. Consumption: 0.1-0.15 kg/m². Packaging: 10 kg drums.
One-component primer for membranes from the MAPETHENE line applied at low temperatures.
Planiseal 88
(former Idrosilex Pronto)
Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
MC-IR
TECHNICAL DATA: Consistency: powder. Pot life of mix: approx. 1 h. Classification: EN 1504-2. Storage: 12 months. Consumption: 1.5 kg/m² per mm of thickness. Packaging: 25 kg bags.
SURFACE PROTECTION SYSTEMS FOR CONCRETE
Planiseal 288
Two-component cementitious mortar for waterproofing structures below ground level and storage tanks.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Plastimul
Bitumen waterproofing emulsion for general purpose use.
EN 15814
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 15814
W1-CB1 C1-R2 POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING
TECHNICAL DATA: Consistency: fluid; applicable by brush. Colour: grey or white. Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: approx. 1 h (at +20°C). Application temperature: +5°C to +35°C. Minimum applicable thickness: 2 mm in 2 coats. Classification: EN 1504-2 - coating (C) principles MC and IR. Storage: comp. A 12 months, comp. B 24 months. Application: spreader, brush or roller. Consumption: approx. 1.9 kg/m² per mm of thickness. Packaging: 25 kg unit: – component A: 20 kg bag; – component B: 5 kg can.
TECHNICAL DATA: Consistency: thick paste. Density: 1.2 g/cm³. pH: 10. Dry solids content: approx. 76%. Storage: 12 months. Minimum application temperature: +5°C. Consumption: approx. 1.7 kg/m² per mm of dry product depending on the substrate. Packaging: 12 and 30 kg drums.
265
27. WATERPROOFING SYSTEMS
Plastimul 1K Super Plus
One-component, solvent-free, quickdrying, low-shrinkage, high-yield, high flexibility bitumen waterproofing emulsion containing polystyrene spheres and rubber granules.
EN 15814
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 15814
W2A-CB2 C2A-R3 POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING
Plastimul 2K Plus
Two-component, solvent-free, quickdrying, low-shrinkage, high flexibility bitumen waterproofing emulsion containing cellulose fibres.
EN 15814
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 15814
W2A-CB2 C2A-R3 POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING
Plastimul 2K Reactive
Two-component, solvent-free, ecocompatible, with high elasticity, instant bitumen waterproofing emulsion, applied by airless spray.
EN 15814
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 15814
W2B-CB2 C2B-R3 POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING
Plastimul 2K Super
Two-component, solvent-free, low-shrinkage, high yield, high-flexibility bitumen waterproofing emulsion containing polystyrene spheres.
EN 15814
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 15814
W2A-CB2 C2A-R2 POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING
266
TECHNICAL DATA: Consistency: paste. Density: 0.65 g/cm³. pH: 10. Dry solids content: approx. 73%. Storage: 12 months. Application temperature range: from +5°C to +30°C. Drying time: approximately 2 days. Consumption: 0.8 kg/m² per mm of thickness of dry product according to the type of substrate. Packaging: 19.5 kg and 7.8 kg drums.
TECHNICAL DATA: Consistency: paste Density: 1.1 g/cm³. pH: 10. Dry solids content: 67%. Storage: 12 months. Application temperature range: from +5°C to +30°C. Mixing ratio: comp A : comp B = 22 : 8. Workability time: 2 hours. Drying time: approximately 2 days. Consumption: 1.5 kg/m² per mm of thickness of dry product according to the type of substrate. Packaging: 30 kg units (A+B = 22+8).
TECHNICAL DATA: Consistency: liquid. Mixing ratio: A : B = 10 : 1. Density comp. A: 1 kg/dm³. pH comp. A: 11.5-12.5. pH comp. B: 6.5-8.5. Storage: 6 months. Application temperature range: from +5°C to +30°C. Consumption: 1.3 kg/m² per mm of thickness of dry product, depending to the substrate. Packaging: – component A: 30 kg drums and 1000 kg tanks; – component B: 25 kg tanks.
TECHNICAL DATA: Consistency: paste. Density: 0.75 kg/dm³. pH: 9-11. Dry solids content: 65%. Storage: 12 months. Application temperature range: from +5°C to +30°C. Mixing ratio: comp A : comp B = 16.9 : 6. Workability time: 3 hours. Drying time: approximately 1-2 days. Consumption: 0.8 kg/m² per mm of thickness of fresh product according to the type of substrate. Packaging: 22.9 kg units.
Plastimul C
Solvent-free concentrated bitumen emulsion for treating substrates before applying waterproofing products from the PLASTIMUL line.
Plastimul Primer
Solvent-free, bitumen primer for treating substrates before applying waterproofing products from the PLASTIMUL range.
Plastimul Primer SB
High-performance rapid-drying solventbased bituminous primer for treating concrete surfaces before applying PLASTIMUL 2K REACTIVE.
Resfoam 1K-M
One-component, ultra-fluid polyurethane resin applied by injection for waterproofing structures and ground and rocks subject to intense percolating water. The reaction time may be regulated.
TECHNICAL DATA: Consistency: paste. Density (g/cm³): approx. 1.1. pH: 10. Mixing ratio: 1:10 (PLASTIMUL C : water). Storage: 12 months. Application temperature: from +5°C to +30°C. Consumption: approx. 100-200 g/m². Packaging: 5 kg drums.
TECHNICAL DATA: Consistency: thixotropic, liquid. Density: 1 kg/l. pH: 10. Dry solids content: 20%. Storage: 12 months. Application temperature range: from +5°C to +30°C (temperature of substrate). Condition of substrate: dry, slightly damp. Application of coating products: after hardening. Consumption: 0.1-0.2 kg/m². Packaging: 10 kg drums.
TECHNICAL DATA: Consistency: liquid. Colour: black. Density (g/cm³): approx. 0.9. Dry solids content (%): 50. Application temperature: +5°C to +35°C. Condition of substrate: dry or slightly damp. Consumption (depending on roughness and absorbency of substrate): approx. 200 g/m². Packaging: 18 kg drums.
TECHNICAL DATA: Mixing ratio: resin: catalyst = 1: 0.1-0.2 by weight. Storage: 6 months. Application: injection. Consumption: in the open air, a mixture of 1 kg of RESFOAM 1K-M (resin) + 0.1 kg of RESFOAM 1K-M AKS (catalyser) forms 50 litres of foam upon contact with 0.1 litre of water. Packaging: – RESFOAM 1K-M (resin): 20 kg plastic drums. – RESFOAM 1K-M AKS (catalyser): 1 kg plastic drums.
267
27. WATERPROOFING SYSTEMS 27.2 Waterproofing structures above ground level_____________________________________________________
Additix P
TECHNICAL DATA: Consistency: liquid. Colour: yellowing. Consumption: 0.9 every 25 kg of PURTOP EASY. Storage: 12 months. Packaging: 0.9 kg.
Thixotropising agent for PURTOP EASY.
Aquaflex
TECHNICAL DATA: Consistency: paste. Colour: white, red and grey. Specific gravity: 1.4 g/cm³. Dry solids content: 70%. Waiting time between each coat: from 2 to 12 hours. Application temperature range: from +5°C to +40°C. Storage: 24 months. Application: roller, brush, trowel or spray. Consumption: approx. 0.7 kg/m² for each coat, which corresponds to a wet thickness of 0.5 mm (final dry thickness 0.35 mm). Packaging: 5 and 20 kg.
Liquid membrane used to form a permanent shell around asbestos cement and for forming waterproof membranes on mineral-based substrates.
Aquaflex Roof
Ready-to-use flexible liquid membrane with fibres for continuous waterproofing layers on exposed external surfaces.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Aquaflex Roof HR
Fibre-filled liquid membrane in water emulsion with high solar reflectance and thermal emittance with a solar reflectance index (SRI) of 105.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
268
TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to +35°C. Waiting time between first and second coat: approximately 8-12 hours. Set to light foot traffic: 12 hours at +23°C. Minimum applicable thickness: 1 mm in 2 coats. Colour: white, grey, brick red, oxide red, green, RAL 6005, RAL 7013 and RAL 9005. Storage: 24 months. Application: roller, brush or trowel. Consumption: • waterproofing membrane: at least 2 kg/m²; • protective finish on bituminous substrates: – approx. 0.5 kg/m² on smooth membranes – approx. 0.9 kg/m² on membranes with a slate-chip face. Packaging: 5 and 20 kg drums.
TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to +35°C. Waiting time between first and second coat: 8-12 hours. Set to foot traffic: 12 hours at +23°C. Colour: highly reflective white. Storage: 24 months. Application: roller, brush or trowel. Consumption: • waterproofing membrane: at least 2 kg/m²; • protective finish on bituminous substrates: – approx. 0.5 kg/m² on smooth membranes – approx. 0.9 kg/m² on mineral-fined membranes. Packaging: 20 kg drums.
Aquaflex Roof Plus
Ready-mixed, high-elasticity, quickdrying, UV-resistant liquid waterproofing membrane.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Aquaflex Roof Premium
Ready-mixed, water-based, VOC-free polyurethane waterproof membrane resistant to foot traffic and standing water.
Drain Front
TPE angular pipe union for terraces and balconies.
Drain Vertical/ Drain Lateral
Kit for installing floor drains, ideal for draining off water from terraces, balconies, bathrooms, boiler rooms, wash-rooms, etc.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
TECHNICAL DATA: Consistency: paste. Colour: highly reflective white, grey, terracotta, green. Density (g/cm³): 1.25. Dry solids content (%): 66. Application temperature: +5°C to +35°C. Service temperature: -5°C to +80°C (without reinforcement); -10°C to +80°C (with MAPETEX 50). Consumption: – 0.9 kg/m² (used as protective finish or reflective coating over existing bitumen membranes); – 2 kg/m² (used as waterproofing membrane). Packaging: 5 and 20 kg drums.
TECHNICAL DATA: Consistency: paste. Colour: high-reflectance white, RAL 7038 grey, RAL 7039, 2500 N grey and terracotta. Density (g/cm³): 1.25. Dry solids content (%): 60. Application temperature: from +5°C to +35°C. Consumption : protective finish or reflective coating on an old bitumen membrane: 0.9-1 kg/m² Waterproof membrane: 1.5-2 kg/m². Packaging: 5 and 20 kg drums.
TECHNICAL DATA: Colour: ivory and copper. Packaging: boxes of 5 pieces.
TECHNICAL DATA: Diameter: 50, 70 and 100 mm. Packaging: 1 kg kits including: – vertical or lateral polypropylene drain-pipe available in 3 diameters (50, 75 and 90 mm) for DRAIN LATERAL and 5 diameters (50-75-82-90-100 mm) for DRAIN VERTICAL, with a welded 400x400 mm polypropylene drain-cover; – telescopic extension; – “anti-odour” plug; – removable stainless steel grate.
269
27. WATERPROOFING SYSTEMS
Isamite
Bitumen paint in solvent.
Mapecoat Filler
Micrometric filler material in polyamide used to create surfaces with a non-slip finish.
Mapecoat PU 20 N
Two-component coloured aliphatic polyurethane topcoat for membranes from the PURTOP line.
Mapecoat PU 25
Two-component coloured aliphatic polyurethane topcoat for membranes from the PURTOP line when used in swimming pools or decorative ponds.
270
TECHNICAL DATA: Consistency: fluid. Colour: black. Density (g/cm³): 100. Dry solids content (%): approx. 50. Dust dry: 15-20 minutes. Consumption: – 100-150 g/m² per coat on metal and non-absorbent surfaces; – 250-300 g/m² per coat on concrete and wood. Packaging: 10 kg (ADR approved packing).
TECHNICAL DATA: Consistency: powder. Colour: white. Storage: 24 months. Packaging: 2 kg.
TECHNICAL DATA: Consistency: liquid. Colour: according to RAL colour available. Mixing ratio A/B (by weight): 4.3:0.7. Pot life of the mix: 60 minutes at +23°C. Consumption: approx. 0.15-0.2 kg/m². Storage: 12 months. Packaging: – 20 kg (A+B), comp. A 17.2 kg and comp. B 2.8 kg; – 5 kg (A+B), comp. A 4.3 kg and comp. B 0.8 kg.
TECHNICAL DATA: Consistency: liquid. Colour: according to RAL colour available. Mixing ratio A/B (by weight): 4.3 : 0.7. Pot life of the mix: 60 minutes at +23°C. Consumption: approx. 0.15-0.2 kg/m². Storage: 12 months. Packaging: comp A 17.2 kg and comp. B 2.8 kg.
Mapecoat TC
TECHNICAL DATA: Mixing ratio: 100/20. Colour of the mix: RAL 5014, RAL 6002, RAL 7001, RAL 7004, RAL 7016, RAL 7032, RAL 7035, RAL 7037. Density of mix: 1.25 g/cm³. Application temperature: +5°C to +35°C. Consumption: 0.6-0.8 kg/m² (two coats of product). Packaging: 18 kg kit (A: 15 kg, B: 3 kg).
Wear-resistant coloured aliphatic polyurethane finish for membranes from the PURTOP line.
Mapeguard WP 200
TECHNICAL DATA: Material: product made up of three layers of polypropylene/polyethylene. Colour: blue. Thickness of membrane (mm): > 200 µm. Size: 30 m x 1 metre and 5 m x 1 metre rolls.
Alkali-resistant waterproofing and anti-fracture membrane for internal use; suitable for overlaying with ceramic, natural stone and LVT floors.
Mapeguard WP Adhesive
TECHNICAL DATA: Colour of mix: brown. Mixing ratio: comp. A : comp. B = 1 : 0.9. Pot life of mix: more than 45 minutes. EMICODE: EC1 Plus - very low emission. Storage: comp. A 12 months, comp. B 24 months. Packaging: 6.65 kg kit (component A 3.5 kg + component B 3.15 kg).
Two-component, rapid-drying, elastic cementitious adhesive for bonding and sealing overlaid MAPEGUARD WP 200 and relative special pieces.
Mapegum EPX/ Mapegum EPX-T
Two-component epoxy-polyurethane resin used to form flexible waterproof and chemical-resistant coats before bonding ceramic.
MAPEI GmbH
Werk Weferlingen Verbundabdichtung
P-66130401.001 P-66130402.001 Säurefliesner Vereinigung e.V. Burgwedel
TECHNICAL DATA: Consistency: creamy paste. Density: 1,400 kg/m³. Application temperature range: from +10°C to +30°C. Temperature when in use: from -30°C to +80°C. Set to light for traffic: after 24 hours. Ready for use: after 3 days. Storage: 24 months in original packaging in a dry place. Consumption: 1.4 kg/m² per mm of thickness. Packaging: comp. A 8.7 kg; comp. B 1.3 kg.
271
27. WATERPROOFING SYSTEMS
Mapegum WPS
TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage: 24 months. Minimum filming temperature: +5°C. Application temperature range: from +5°C to +35°C. Time for complete drying of a 2 mm thick layer: 5 hours at +23°C. Time for complete drying of a 2 mm thick layer: 12 hours at +5°C. Waiting time before laying coating: 12-24 hours. EMICODE: EC1 Plus - very low emission. Consumption: 1.5 kg/m² per mm of thickness. Packaging: 5, 10 and 25 kg drums.
Quick-drying flexible liquid membrane for waterproofing internal surfaces.
Mapelastic
Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.
EN 1504-2
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
EN 14891
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 14891
CMO2P
TECHNICAL DATA: Consistency of mix: plastic-trowable. Mixing ratio: comp. A: comp. B = 3 : 1. Pot life of mix: approximately 1 hour. Application temperature range: from +5°C to +35°C. Minimum applicable thickness: 2 mm in 2 coats. Classification: EN 1504-2 - coating (C) principles PI, MC and IR and EN 14891 norm. EMICODE: EC1 Plus - very low emission. Storage: 12 months comp. A, 24 months comp. B. Application: trowel or by spray. Consumption: – trowel: 1.7 kg/m² per mm of thickness; – spray: 2.2 kg/m² per mm of thickness. Packaging: – 32 kg units: 24 kg bags + 8 kg tanks; – 16 kg units: 2x6 kg sachets + 4 kg tanks.
LIQUID-APPLIED WATER IMPERMEABLE PRODUCTS
Mapelastic AquaDefense
Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing internal and external surfaces.
EN 14891
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 14891
DMO1 LIQUID-APPLIED WATER IMPERMEABLE PRODUCTS
Mapelastic Smart
Two-component, high-flexibility cementitious mortar (with crack-bridging > 2 mm), applied by trowel or with a roller, for waterproofing balconies, terraces, bathrooms and swimming pools.
EN 1504-2
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
EN 14891
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 14891
CMO1P LIQUID-APPLIED WATER IMPERMEABLE PRODUCTS
272
TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to +35°C at +23°C and 50% R.H.. Waiting time between first and second coat: approximately 1 hour (at +23°C and 50% R.H.). Waiting time before laying coating: 3-4 hours (at +23°C and 50% R.H.). Times refer to +23°C and 50% relative humidity of the air when the product is applied on dried screeds with a residual moisture lower than 3%. Minimum applicable thickness: 0.8 mm in 2 coats. Storage: 24 months. Application: roller, brush or trowel. Consumption: 1.3 kg/m² per mm of thickness. Packaging: 7.5 kg and 15 kg drums.
TECHNICAL DATA: Consistency of mix: fluid-brushable. Mixing ratio: comp. A: comp. B = 2 : 1. Pot life of mix: approximately 1 hour. Application temperature range: from +5°C to +40°C. Minimum applicable thickness: 2 mm in 2 coats. Classification: EN 1504-2 - coating (C) principles PI, MC and IR and EN 14891 norm. EMICODE: EC1 Plus - very low emission. Storage: 12 months comp. A, 24 months comp. B. Application: brush, roller or spray. Consumption: – trowel or roller: 1.6 kg/m² per mm of thickness; – spray: 2.2 kg/m² per mm of thickness. Packaging: 30 kg units: 20 kg bags + 10 kg tanks.
Mapelastic Turbo
Two-component rapid-drying elastic cementitious mortar for waterproofing terraces and balconies, including at low temperatures and on substrates not completely dry.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-2 (C) PRINCIPLES
PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
EN 14891 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 14891
CMO1P LIQUID-APPLIED WATER IMPERMEABLE PRODUCTS
Mapenet 150
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.
MapeSlope
One-component cementitious levelling mortar for building up slopes on roofs over new and old waterproof sheaths.
Mapetex 50
Non-woven polypropylene fabric (weight 50 g/m²) for reinforcing waterproof membranes.
TECHNICAL DATA: Consistency of mix: fluid. Mixing ratio: comp. A : comp. B = 1 : 0.8. Pot life of mix: more than 45 mins. Application temperature: from +5°C to +35°C. Minimum applicable thickness: 2 mm in two coats with reinforcement embedded between the two layers. Classification: EN 1504-2 - coating (C) principles PI, MC and IR, produced in compliance with EN 14891 norm. EMICODE: EC1 Plus - very low emission. Storage: 12 months component A, 24 months component B. Application: trowel. Consumption: approx. 2.4 kg/ m² (for two coats of product with reinforcement embedded between the two layers). Packaging: 36 kg kit: 20 kg bags + 16 kg tanks, 18 kg kit: 10 kg bags + 8 kg tanks.
TECHNICAL DATA: Colour: blue. Weight: 150 g/m² ± 5%. Mesh size: 4x4.5 mm. Storage: unlimited. Packaging: 50 m x 1 m rolls.
TECHNICAL DATA: Consistency: powder. Colour of mix: light grey. Applicable thickness (cm): up to 5. Mixing ratio: 4.5-5.0 litres per bag. Consumption (kg/m² per cm): 18.5. Packaging: 25 kg bags.
TECHNICAL DATA: Appearance: black non-woven fabric. Weight: 50 g/m². Tensile strength: – 70 N (lengthways); – 60 N (widthways). Elongation at failure: – > 95% (lengthways); – > 95% (widthways). Packaging: 25 m x 100 cm and 25 m x 20 cm wide rolls.
273
27. WATERPROOFING SYSTEMS
Mapetex FG
TECHNICAL DATA: Appearance: glass fiber reinforcing mat with random fiber orientation. Colour: off-white. Storage: 24 months. Packaging: 50 x 1 m rolls.
Glass fiber reinforcing mat for PURTOP EASY.
Mapetex Sel
TECHNICAL DATA: Weight: 80 g/m². Thickness: 0.6 mm. Tensile strength: 5 kN/m. Deformation at maximum strain: – 80% in a longitudinal direction; – 45% in a transversal direction. Packaging: 25 m x 1 m rolls.
Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing membranes.
Monolastic
w ne ula m for
One-component cementitious waterproofing mortar.
EN 14891
IN COMPLIANCE WITH EUROPEAN STANDARD
EN 14891
CMO1P LIQUID-APPLIED WATER IMPERMEABLE PRODUCTS
Primer BI
Synthetic resin primer in solvents, specifically developed for improving adhesion of polyurethane coating products (from the PURTOP range) on existing bituminous membranes.
274
TECHNICAL DATA: Consistency of mix: plastic-trowable. Dry solids content: 100%. Classification: EN 14891. Storage: 12 months. Mixing water: 27-29%. Pot life of mix: approximately 1 hour. Application temperature range: from +5°C to +35°C. Minimum thickness per coat: 1 mm. Maximum thickness per coat: 2 mm. Consumption: 1.1 kg/m² per mm of thickness. Packaging: 20 kg vacuum-packed polyethylene bags.
TECHNICAL DATA: Colour: transparent. Consistency: fluid liquid. Density: 0.96 g/cm³. Dry solids content (%): 10. Storage: 24 months in its original sealed packaging. Application temperature range: from +5°C to +35°C. Ready for painting over: 2-4 hours. Drying time: 5-6 hours at +20°C. Consumption: 0.20 kg/m² per coat, depending on the type of the substrates. Packaging: 10 kg.
Primer EP4 Fast
Two-component solvent-free epoxy primer for damp substrates.
Primer EP 100W
Two-component solvent-free waterbased epoxy primer for non-absorbent substrates.
Primer for Aquaflex
Synthetic resin primer in solvent, specifically formulated for bitumen surfaces in asbestos cement and surfaces with unknown adherence properties.
Primer P1
One-component solvent-based primer for polyurea coatings (from the PURTOP line) on plastic surfaces such as PVC.
TECHNICAL DATA: Consistency: creamy. Waiting time between each coat: 5-6 hours at +23°C. Colour: white. Consumption: 2.5 kg/m² corresponds to a dry coat approx. 2 mm thick. Storage: 12 months. Packaging: comp A 12.2 kg and comp. B 2.8 kg.
TECHNICAL DATA: Consistency: liquid. Colour: beige. Mixing ratio A/B (by weight): 1 : 3. Pot life of the mix: 90 minutes at +23°C. Consumption: approx. 0.15-0.3 kg/m². Storage: 12 months. Packaging: – 20 kg kit, comp. A 5 kg and comp. B 15 kg; – 4 kg kit, comp. A 1 kg and comp. B 3 kg.
TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Specific gravity: 1.1 g/cm³. Dry solids content: 50%. Waiting time before applying other products: 6-8 hours. Storage: 24 months. Application: roller, brush or spray. Consumption: approx. 0.16 kg/m². Packaging: 6 kg.
TECHNICAL DATA: Consistency: transparent liquid. Colour: yellowish. Density (g/cm³): 0.86. Dry solids content (%): 10. Viscosity (mPa s): approx. 33 (No. 1 rotor, 100 rpm). Application temperature: +5°C to +35°C. Recoat time (mins.): 30 to 60. Consumption: 0.1-0.2 kg/m². Packaging: 50 kg tanks.
275
27. WATERPROOFING SYSTEMS
Primer P2
TECHNICAL DATA: Consistency: transparent liquid. Colour: yellowish. Density (g/cm³): 0.89. Dry solids content (%): 10. Viscosity (mPa s): approx. 22 (No. 1 rotor, 100 rpm). Application temperature: +5°C to +35°C. Recoat time (mins.): 30 to 60. Consumption: 0.1-0.2 kg/m². Packaging: 50 kg tanks.
One-component solvent-based primer for polyurea coatings (from the PURTOP line) on plastic surfaces such as TPO.
Primer P3
TECHNICAL DATA: Consistency: comp. A liquid; comp. B liquid. Colour: comp. A transparent yellow; comp. B dark brown. Density (g/cm³): comp. A 0.9÷1.1; comp. B 0.9÷1.2. Dry solids content (%): comp. A approx. 90; comp. B 100. Viscosity (mPa·s): comp. A 350÷500 (needle 2, 50 rpm); comp. B 70÷110 (needle 1, 100 rpm). A/B ratio (in weight): 100/37. Application temperature: +5°C to +35°C. Workability time (mins.): approx. 30. Recoat time for polyurethane finishes (h): 4. Recoat time for bitumen membranes (h): 2-4. Consumption: 0.1-0.2 kg/m². Packaging: 5+1.20 kg units (A+B); 1.24 kg units.
Two-component solvent-based polyurethane primer for products from the PURTOP line.
Primer PU Fast
TECHNICAL DATA: Consistency: liquid. Colour: light brown. Mixing ratio A/B (by weight): 45:55. Pot life of the mix: 35 minutes at +23°C. Consumption: approx. 0.15-0.3 kg/m². Storage: 12 months. Packaging: comp A 4.5 kg and comp. B 5.5 kg.
Two-component solvent-free epoxy primer for damp substrates.
Purtop 400 M
Two-component, solvent-free, spray applied, hybrid polyurea membrane applied in sito using a high-pressure, bi-mixer type pump to form waterproof coatings on bridge decks and flat roofs.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
PRINCIPLES
PI-MC-PR-RC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
276
TECHNICAL DATA: A/B ratio (by volume): 100/100. Classification: EN 1504-2. Application: by spray with a high-pressure bi-mixer pump. Consumption: 2.2 kg/m² per 2 mm of thickness. Packaging: – component A: 220 kg drums; – component B: 225 kg drums.
Purtop 600
Two-component, solvent-free, hybrid polyurea membrane applied by spray with a high-pressure, bi-mixer type pump, to form waterproof coatings on new and old buildings directly on site (not suitable for vehicles).
TECHNICAL DATA: EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
PRINCIPLES
PI-MC-PR-RC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
A/B ratio (by volume): 100/68. Classification: EN 1504-2. Application: by spray with a high-pressure bi-mixer pump. Consumption: 2.2 kg/m² per 2 mm of thickness. Packaging: – component A: 210 kg drums; – component B: 220 kg drums.
Purtop 1000
Two-component, solvent-free, pure polyurea membrane applied by spray with a high-pressure, bi-mixer type pump, to form waterproof coatings directly on site.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
PRINCIPLES
PI-MC-PR-RC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
Purtop ADY
Admixture for applying PURTOP EASY waterproofing membranes in just one single coat.
Purtop Easy
One-component, elastic polyurethane waterproofing membrane.
TECHNICAL DATA: A/B ratio (by volume): 100/100. Classification: EN 1504-2. Application: by spray with a high-pressure bi-mixer pump. Consumption: 2.2 kg/m² per 2 mm of thickness. Packaging: – component A: 220 kg drums; – component B: 225 kg drums.
TECHNICAL DATA: Consistency: liquid. Colour: brown. Mixing ratio A/B with Purtop Easy (by weight): 100 : 8. Storage: 12 months. Packaging: boxes containing six 0.5 l or 1.2 l or eight 2 l cans.
TECHNICAL DATA: Consistency: thick liquid. Waiting time between each coat: 24 hours at +23°C. Colour: white, grey, red. Consumption: 2 kg/m² corresponds to a dry coat approx. 1.5 mm. Storage: 12 months. Packaging: 6,15 and 25 kg.
277
27. WATERPROOFING SYSTEMS
Purtop Easy DW
TECHNICAL DATA: Consistency: creamy. Waiting time between each coat: 5-6 hours at +23°C. Colour: white. Consumption: 2.5 kg/m² corresponds to a dry coat approx. 2 mm. Storage: 12 months. Packaging: comp A 12.2 kg and comp. B 2.8 kg.
Two-component elastic polyurethane membrane for waterproofing drinking water tanks.
Purtop Easy T
TECHNICAL DATA: Consistency: liquid. Waiting time between each coat: 8-24 hours at +23°C. Colour: transparent. Consumption: 1 kg/m² corresponds to a dry coat approx. 1 mm thick. Storage: 12 months. Packaging: 5 and 20 kg.
One-component transparent aliphatic polyurethane waterproofing membrane for terraces and balconies.
Purtop Easy T Primer
TECHNICAL DATA: Consistency: thick liquid. Colour: transparent. Touch dry: 10 minutes at +23°C. Consumption: approx. 50 kg/m². Storage: 12 months. Packaging: 4 kg.
Colourless primer for non-absorbent substrates to be used before laying PURTOP EASY T.
Purtop FR
Two-component, solvent-free, hybrid polyurea membrane applied by spray with a high-pressure, bi-mixer type pump, to create fire-resistant waterproof coatings in situ.
EN 1504-2 IN COMPLIANCE WITH EUROPEAN STANDARD
PRINCIPLES
PI-MC-PR-RC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE
278
TECHNICAL DATA: A/B ratio (in volume): 100/100. Classification: EN 1504-2. Fire reaction class (EN 13501-1): – D, s3-d0; – BFL - s1 (when applied on floors). Reaction to external fire classification (EN 13501-5): BROOF t1, t2, t3 and t4. Application: by spray with a high-pressure bi-mixer pump. Consumption: 2.2 kg/m² (2 mm thick coat). Packaging: – component A: 225 kg drum; – component B: 225 kg drum.
Purtop HA
TECHNICAL DATA: A/B ratio (by weight): 100/106.5. Application: notched trowel. Consumption: 2.6 kg/m² per 2 mm of thickness. Packaging: – component A: 10 kg drum; – component B: 10.7 kg drum.
Manually-applied two-component, polyurea waterproofing membrane.
Purtop Primer Black
TECHNICAL DATA: Consistency: liquid. Colours: black. Application temperature range: from +5°C to +35°C. Hardening time: 2-4 hours. Packaging: 20 kg drums.
One-component solvent primer, specific for improving adhesion of asphalt flooring on surfaces waterproofed with products from the PURTOP range.
27.3 Sealing and waterproofing joints and fillets______________________________________________________
Adesilex PG4
Two-component, thixotropic epoxy adhesive with modified rheology for bonding MAPEBAND, MAPEBAND TPE, PVC strips and Hypalon and for structural bonds.
EN 1504-4 IN COMPLIANCE WITH EUROPEAN STANDARD
EN 1504-4 STRUCTURAL BONDING
Idrostop
Hydrophilic, expanding rubber profiles for waterproof working joints.
TECHNICAL DATA: Workability time at +23°C: 70 min. Setting time at +23°C: 5 hours. Final hardening time: 7 days. Classification: EN 1504-4. Application: trowel or smooth trowel. Consumption: 1.60-1.65 kg/m² per mm of thickness. Packaging: 30 kg (A+B), 6 kg (A+B) and 2 kg (A+B).
TECHNICAL DATA: Shape: pre-formed tape. Sizes available: 20x10 mm (IDROSTOP 10); 20x15 mm (IDROSTOP 15); 20x25 mm (IDROSTOP 25). Storage: 12 months. Application temperature range using IDROSTOP MASTIC as an adhesive: from +10°C to +40°C. Waiting time before casting if laying has been carried out using IDROSTOP MASTIC: 24 hours. Waiting time before casting if fixed in place with nails or screws: not required. Maximum width of joint: 7 mm. Packaging: IDROSTOP 10: 6x10 m rolls; IDROSTOP 15: 6x7 m rolls; IDROSTOP 25: 6x5 m rolls.
279
27. WATERPROOFING SYSTEMS
Idrostop B25
Hydro-expanding bentonite jointing material for sealing construction joints.
Idrostop Mastic
One-component adhesive for laying IDROSTOP.
Idrostop PVC BE
PVC waterstop with external lug for sealing structural joints.
Idrostop PVC BI
PVC waterstop with internal lug for sealing structural joints.
280
TECHNICAL DATA: Shape: pre-formed tape. Size: 20x25 mm. Storage: 24 months. Application temperature range: from -5°C to +50°C. Waiting time before casting: not required. Packaging: 6x5 m rolls.
TECHNICAL DATA: Consistency: thixotropic paste. Dry solids content: 100%. Storage: 18 months. Application temperature range: from +5°C to +35°C. Dust dry: 10 minutes. Waiting time before casting: 24 hours. EMICODE: EC1 Plus - very low emission. Consumption: approximately 300 ml each 5 linear metres of IDROSTOP. Packaging: boxes containing 12x300 ml cartridges.
TECHNICAL DATA: Application: mechanically. Packaging: IDROSTOP PVC BE is available in two sizes: – IDROSTOP PVC BE20 (width 20 cm) in 25 m-long rolls; – IDROSTOP PVC BE24 (width 24 cm) in 25 m-long rolls.
TECHNICAL DATA: Application: mechanically. Packaging: IDROSTOP PVC BI is available in three sizes: – IDROSTOP PVC BI20 (width 20 cm) in 25 m-long rolls; – IDROSTOP PVC BI25 (width 25 cm) in 25 m-long rolls; – IDROSTOP PVC BI30 (width 30 cm) in 25 m-long rolls.
Idrostop Soft
Hydro-expansive, high-flexibility bentonite jointing profile for waterproofing construction joints and second pours of concrete.
Mapeband
Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths.
Mapeband Easy
Rubber tape sandwiched between two layers of non-woven fabric to form elastic joints in waterproofing systems.
Mapeband Flex Roll
Tape for the flexible waterproofing of expansion joint and cracks.
TECHNICAL DATA: Shape: pre-formed strip. Size: 25x20 mm. Application: bonded in place using MAPEFLEX MS 45 or ULTRABOND MS RAPID one-component adhesives. Application temperature range: from -15°C to +60°C. Packaging: 6x5 m rolls.
TECHNICAL DATA: In service temperature range: from -30°C to +60°C. EMICODE: EC1 Plus - very low emission. Packaging: – 120 mmx50 m rolls; – 120 mmx10 m rolls; – 90° and 270° angular pieces; – gaskets for outlets, sizes 120x120 mm and 400x400 mm; – special cross and T pieces.
TECHNICAL DATA: Type of material: rubber sandwiched between two layers of non-woven polypropylene fabric. Thickness: 0.68 mm. Width: 130 mm. Tensile strength: 45 N/15 mm. Elongation at failure: 315 %. EMICODE: EC1 Plus - very low emission. Packaging: – 30 m long by; – 10 m long by; – 90° and 270° angular pieces. – templates to make through holes (200 x 200 mm and 400 x 400 mm).
TECHNICAL DATA: Material: TPE. Width: 200 mm, 300 mm, 400 mm, 600 mm and 800 mm (other sizes available upon request). EMICODE: EC1 Plus - very low emission. Thickness: 2 mm. Packaging: 20 m rolls.
281
27. WATERPROOFING SYSTEMS
Mapeband PE 120
PVC tape for waterproofing systems made from liquid membranes.
Mapeband SA
Self-adhesive butyl tape with alkali-resistant, non-woven fabric for elastic waterproofing systems.
Mapeband TPE
TPE tape for flexible sealing and waterproofing of expansion joints and cracks subject to movement.
Mapeflex E-PU 30 NS
NEW
Two-component, high-strength, epoxypolyurethane sealant with high modulus of elasticity.
282
TECHNICAL DATA: Thickness of tape: approximately 0.7 mm. In service temperature range: from -5°C to +30°C EMICODE: EC1 Plus - very low emission. Packaging: – rolls 120 mm wide by 50 m long; – rolls 120 mm wide by 10 m long; – 90° and 270° angular pieces; – gaskets for outlets, sizes 120x120 mm and 425x425 mm.
TECHNICAL DATA: Density: 1.6 g/cm³. Temperature of application: from +5°C to +30°C. Width: 100 mm. Thickness: approx. 2 mm. EMICODE: EC1 Plus - very low emission. Packaging: – 25 m rolls; – gaskets for outlets, sizes 370x370 mm.
TECHNICAL DATA: Sizes available: – 17 cm (MAPEBAND TPE 170); – 32.5 cm (MAPEBAND TPE 325). Width of expanding zone: – MAPEBAND TPE 170: 50 mm; – MAPEBAND TPE 325: 165 mm. Thickness: 1.2 mm. Maximum elongation of expanding zone: – 5 mm (MAPEBAND TPE 170); – 10 mm (MAPEBAND TPE 325). Packaging: – 30 m rolls (both 170 and 325 width versions); – special cross and T pieces (both 170 and 325 width versions).
TECHNICAL DATA: Movement in service: 10%. Shore A hardness: 60. Workability time: 40 minutes. Set to traffic: 24-36 h. Colour: 113 grey. Application: trowel. Consumption: 0.14 kg/linear metres (10x10 mm section). Packaging: 5 (A+B).
Mapeflex PU 40
Polyurethane sealant with a low modulus of elasticity with movements up to 25%.
EN 15651
Mapeflex PU 45 FT
Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus of elasticity for movements up to 20%.
EN 15651
Mapeflex PU50 SL
Castable polyurethane sealant with a low modulus of elasticity for movements up to 25%.
Mapefoam
Closed-cell, extruded foam polyethylene cord used as a support for elastomer sealants to gauge the correct size of flexible joints. Supplied in hanks, total length proportional to the diameter.
EN 15651
TECHNICAL DATA: Movement when in service: 25%. Modulus of elasticity with 100% elongation: 0.3 N/mm². Shore A hardness: 27. Workability: 4 hours. Colours: white, grey 111, grey 112. Application: extrusion pistol. Consumption: – 3.0 meters every 300 ml cartridge; – 6.0 meters every 600 soft-cartridge (10x10 mm section). Packaging: 300 ml cartridges; 600 ml soft-cartridges.
TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100% elongation: 0.80 N/mm². Shore A hardness: 38. Workability time: 35 mins. Colours: white, 111 grey, 113 grey, black. Application: silicone gun. Consumption: 3.0 meters per 300 ml cartridge, 6.0 meters per 600 ml tube (10x10 mm section). Packaging: 300 ml cartridge, 600 ml tube.
TECHNICAL DATA: Elongation at failure: > 1000%. Movement when in service: ± 25%. Set to light foot traffic: according to the depth of the joint. Ready for use: according to the depth of the joint. Shore A hardness: 22. Colour: 111 grey. Application: pouring, extrusion gun, pressure pump. Storage: 12 months. Consumption: 6.0 metres every 600 soft-cartridges (10x10 mm section). Packaging: boxes of 20 pieces (600 ml soft-cartridges).
TECHNICAL DATA: Density: 40 kg/m³. Tensile strength: 30 N/mm². Water absorption: none. Colour: grey. In service temperature range: from -40°C to +80°C. Packaging: Ø 6 mm boxes of 550 m - bags of 10 m Ø 10 mm boxes of 550 m - bags of 10 m Ø 15 mm boxes of 550 m - bags of 10 m Ø 20 mm boxes of 350 m - bags of 10 m Ø 25 mm boxes of 200 m Ø 30 mm boxes of 160 m Ø 40 mm boxes of 270 m
283
27. WATERPROOFING SYSTEMS
Mapeguard IC/ Mapeguard EC
TECHNICAL DATA: Material: Product made up of three layers of polypropylene/polyethylene. Colour: blue. Size: 11 x 11 x 9 cm corner pieces.
Special shaped pieces for the MAPEGUARD WP SYSTEM waterproofing system for internal and external corners and edges.
Mapeguard PC
TECHNICAL DATA: Material: product made up of three layers of polypropylene/polyethylene. Colour: blue. Packaging: boxes of 25 gaskets.
Flexible gaskets in various diameters for the MAPEGUARD WP SYSTEM for waterproofing through pipes and drains.
Mapeguard ST
TECHNICAL DATA: Material: product made up of three layers of polypropylene/polyethylene. Colour: blue. Size: 10 m x 20 cm and 30 m x 12 m rolls.
Waterproofing tape in rolls for sealing edges and joints between sheets of MAPEGUARD WP 200.
Mapesil AC
Pure, mould-resistant, acetic silicone sealant for movements up to 25%.
284
EN 15651
TECHNICAL DATA: Movement when in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm². Shore A hardness: 20. Workability: 10’. Colours: transparent and the 34 colours. EMICODE: EC1 Plus - very low emission. Application: extrusion gun. Consumption: 3.1 metres every 310 ml cartridge (10x10 mm section). Packaging: 310 ml cartridges.
Mapetape
Cold-applied self-adhesive tape for sealing and waterproofing overlapping joints and cracks. Available in various widths (50, 100, 150 and 200 mm) and coloured finishes (aluminium, lead).
Ultrabond MS Rapid
Rapid-setting, deformable, hybrid assembly adhesive for internal and external use with a high initial sucker effect.
TECHNICAL DATA: In-service temperature: -20°C/+80°C (-20°C/+65°C if applied on surfaces with a slope of more than 45°). Application temperature: +5°C/+45°C. Elongation at failure: > 20%. Storage: 24 months at +5°C/+30°C.
TECHNICAL DATA: Viscosity: thixotropic paste. Density: 1.55 kg/l. Open time: 5’. Initial tensile strength: 25 N. Final shear strength: 30 kg/cm². Hardening time: 2 h. EMICODE: EC1R Plus - very low emission. Colour: white. Application: gun. Consumption: 5 linear metres (triangular section). Packaging: 300 ml cartridges.
285
ADMIXTURES FOR CONCRETE
28. ADMIXTURES FOR CONCRETE 28.1 Admixtures for concrete______________________________________________________________________
Cablejet
Expansive and plasticising admixture for making fluid slurries.
EN 934-4
Dynamon SX
Modified acrylic super-plasticiser for concrete, characterised by its low water/ cement ratio, very high mechanical strength and long workability times.
EN 934-2 T 3.1-3.2
Expancrete Plus
Expanfluid
288
TECHNICAL DATA: Dosage: 0.5-2 lit every 100 kg of cement for conventional concrete, or of the fine parts (through a 0.1 mm sieve) for self-compacting concrete. Packaging: 25 kg tanks.
TECHNICAL DATA: Dosage: between 2 and 5% by weight of cement in the mix. Packaging: – 20 kg vacuum-packed polyethylene bags; – box of 4 x 3 kg water-soluble bags.
Expansive admix for controlled-shrinkage concrete.
Expansive anti-shrinkage agent for slurries for injection.
TECHNICAL DATA: Dosage: 2% to 4% of weight of cement. Packaging: 18 kg bags. Box of 4 x 3 kg water-soluble bags.
EN 934-4 T.1
TECHNICAL DATA: Dosage: 3% to 6% of weight of cement. Packaging: box of 4 x 3 kg water-soluble bags.
Idrocrete DM
Bulk water-repellent admixture. Particularly recommended for concrete with a damp earth consistency.
EN 934-2 T9
Idrocrete KR 1000
Powdered crystallising admixture for waterproof concrete.
EN 934-2 T9
Idrocrete S
Bulk water-repellent, waterproofing admixture.
EN 934-2 T9
Mapeair AE1
Aerating product for concrete and cementitious mortar.
EN 934-2 T5
TECHNICAL DATA: Dosage: from 0.2 to 0.6 kg every 100 kg of cement. Packaging: 25 kg tanks.
TECHNICAL DATA: Dosage: 1 to 3 kg every 100 kg of cement. Packaging: 20 kg bags and boxes of 4 x 4 kg water-soluble bags.
TECHNICAL DATA: Dosage: from 0.6 to 1.2 kg every 100 kg of cement. Packaging: 10 and 25 kg tanks.
TECHNICAL DATA: Dosage: – concrete: from 15 to 100 ml every 100 kg of cement. – cementitious mortar: from 100 to 300 ml every 100 kg of binder. Packaging: 10 and 25 kg tanks.
289
28. ADMIXTURES FOR CONCRETE
Mapeair LA/P
TECHNICAL DATA: Dosage: 0.5 kg per m³ of mix. Packaging: box of 30 x 0.5 kg water-soluble sachets.
Admixture for fluid fillers, mortar and lightweight concrete.
Mapecrete Drain P
TECHNICAL DATA: Dosage: 0.5% to 3% of weight of cement. Packaging: box of 4 x 3 kg water-soluble bags.
Powdered admixture for making pervious concrete.
Mapecure SRA
TECHNICAL DATA: Consumption: Mortar: 0.25-0.5% by weight of the mortar. Concrete and beton: 5-8 l/m³. Packaging: 20 kg tanks.
Curing admixture for cementitious mortar and concrete to reduce hydraulic shrinkage and the formation of micro-cracks.
Mapefast C
Chloride-based admixture to accelerate setting and hardening of cementitious mortar.
290
EN 934-2 T9
TECHNICAL DATA: Dosage: 0.75-1.5 kg every 100 kg of cement. Packaging: 7, 13 and 30 kg tanks.
Mapefast CF/L and Mapefast CF/P
Chloride-free hardening accelerator for concrete and mortar
EN 934-2 T7
Mapefibre NS12/NS18
TECHNICAL DATA: Dosage: 600 g/m³ of concrete or mortar. Packaging: boxes of 30x0.6 kg each.
Polypropylene microfibres for concrete.
Mapefibre Screed 24
NEW
24 mm long polymer fibres specifically designed to be embedded in screeds.
Mapefibre ST 50 Twisted
NEW
Class II structural polymer fibres, in compliance with EN 14889-2:2006, with a length of 50 mm respectively, developed to improve the performance characteristics of conventional concrete, pre-cast concrete and shotcrete.
TECHNICAL DATA: Dosage: MAPEFAST CF/L: 0.75-3 l per 100 kg of cement; MAPEFAST CF/P: 0.5-2 l per 100 kg of cement. Packaging: – powder: boxes of 24x1 kg; – liquid: 6, 12 and 30 kg tanks.
EN 14889-2
EN 14889-2
TECHNICAL DATA: Dosage: from 0.8 to 2 kg/m³ of concrete, depending on the required performances. Packaging: – 6 kg plastic bags; – carton box containing 15 water soluble bags 1 kg/each.
TECHNICAL DATA: Dosage: 1.5-3 kg /m³ of concrete, depending on the required performances. Packaging: – 3 kg plastic bags; – carton box containing 10 water soluble bags 1.5 kg/each.
291
28. ADMIXTURES FOR CONCRETE
Mapefibre ST30/ST42
TECHNICAL DATA: Dosage: from 1 to 7 kg per cubic metre of mix. Packaging: 6 kg polyethylene bags.
Structural polymer fibres for concrete and cementitious screeds. May be used to completely or partially substitute conventional reinforcement. Length of fibres: 30 and 42 mm.
Mapefluid N200
Super-plasticising sulphonated naphthalene admixtures for concrete. Permits the amount of mixing water to be drastically reduced, with a considerable increase in strength, even after short curing periods.
EN 934-2 T 3.1-3.2
Mapefluid PZ500
Pozzolanic-activity super-plasticiser in powder form for high-quality mortar and concrete.
EN 934-2 T 3.1-3.2-9
TECHNICAL DATA: Dosage: from 20 to 60 kg per m³ of mix. Packaging: 11 kg vacuum-packed polyethylene bags.
EN 934-2 T 11.1-11.2-9
TECHNICAL DATA: Dosage: from 20 to 60 kg per m³ of mix. Packaging: 11 kg vacuum-packed polyethylene bags.
Mapefluid PZ504
Pozzolanic-activity super-plasticiser in powder form for high-quality mortar and concrete and a low loss in workability.
292
TECHNICAL DATA: Dosage: from 0.5 a 1.5 litres every 100 kg of cement. Packaging: 10 and 25 kg drums.
Mapefluid R104
Super-plasticising retardant admixture for concrete, particularly suitable for use in summer to help maintain workability of the mix.
EN 934-2 T 11.1-11.2
Mapeplast PZ300
Powdered admixture made from micronized Pozzolan-activity materials.
Mapeplast SF
EN 12620
NEW
TECHNICAL DATA: Dosage: 50 kg to 250 kg per m³ according to specific site requirements. Packaging: 20 kg paper bags.
TECHNICAL DATA: Dosage: from 20 to 60 kg/m³ of concrete, depending on the required performances. Packaging: – 20 kg bags; – 10 kg soluble bags.
Powdered admixture with pozzolanic action to be used in combination with superplasticizers for high-quality mortar, grout and concrete with thixotropic, plastic, fluid or super-fluid consistency.
Mapeplast UW
Anti-leaching cohesion-inducing admixture for underwater pours.
TECHNICAL DATA: Dosage: from 0.5 a 1.5 litres every 100 kg of cement. Packaging: 25 kg tanks.
EN 934-2 T4
TECHNICAL DATA: Dosage: 0.6% to 3% of weight of cement. Packaging: – box of 4 x 3 kg bags; – box of 4 x 3 kg water-soluble bags.
293
28. ADMIXTURES FOR CONCRETE
Mapetard
Retardant admixture for concrete and mortar with a plasticising effect. Retardant action on setting times of cement. Particularly suitable for use in summer to help maintain workability of the mix.
Planicrete
Synthetic latex rubber to improve adhesion of cement mixes.
EN 934-2 T8
TECHNICAL DATA: Dosage: from 0.2 a 0.5 litres every 100 kg of cement. Packaging: 25 kg tanks.
TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 36%. Storage: 24 months. Consumption: – for bonding slurry: 100-150 g/m²; – to prepare screeds and renders: 50-80 kg/m³. Packaging: 5, 10 and 25 kg drums and 12x1 kg packages.
28.2 Admixtures for screeds _______________________________________________________________________
Mapescreed Advance HR
NEW
Admixture for high-strength, quickdrying, controlled-shrinkage, cementitious screed mortar with a semidry consistency.
Mapescreed Advance MR
NEW
Admixture for medium-strength, quickdrying, controlled-shrinkage, cementitious screed mortar with a semidry consistency.
294
TECHNICAL DATA: Dosage: from 0.5 to 1.5 l per 100 kg of cement. Packaging: in 25 kg drums and 1000 l tanks.
TECHNICAL DATA: Dosage: from 0.5 to 1.5 l per 100 kg of cement. Packaging: in 25 kg drums and 1000 l tanks.
Mapescreed 720
Cement admixture for ready-mixed or site mixed cementitious screeds.
Mapescreed HF GEL
Special plasticising and hydrophobizing gel admixture with polymer microfibres for cementitious screeds.
Mapescreed Finish NEW
Finishing aid for cementitious screeds.
Mapescreed Slowset NEW
Admixture for semi-dry cementitious quick-drying screeds, for prolonged workability during hot weather.
TECHNICAL DATA: Dosage: from 0.5 to 1.5 l per 100 kg of cement. Packaging: in 25 kg drums and 1000 l tanks.
TECHNICAL DATA: Dosage: 1.0 l per 100 kg of cement. Packaging: 22 kg drums and 1000 l tanks.
TECHNICAL DATA: Dilution: 1 part of MAPESCREED FINISH with 9 parts of water. Yield: 1 l of diluted product per 5-10 m². Packaging: in 25 kg drums and 1000 l tanks.
TECHNICAL DATA: Dosage: 0,5 -0,8 l per 100 kg of cement. Packaging: 22 kg drums and 1000 l tanks.
295
28. ADMIXTURES FOR CONCRETE 28.3 Form-release agents_________________________________________________________________________
DMA 1000
Emulsionable form-release agent for wooden formwork. Emulsify one part of the product with 5-20 parts of water according to the type of formwork.
DMA 2000
Ready-to-use chemical/physical action form-release agent for metal formwork.
Mapeform 1500
Multi-purpose, low viscosity, chemical/ physical-action form-release oil to facilitate stripping concrete.
Mapeform Eco Oil
Chemical-action vegetable oil-based form release agent to make stripping concrete easier.
296
TECHNICAL DATA: Application: brush or spray. Consumption: 10-30 g/m² of neat product. Packaging: 4.5, 23 and 9 kg tanks.
TECHNICAL DATA: Application: brush or spray. Consumption: 20-40 g/m² according to the type of formwork used. Packaging: 4.5 and 23 kg tanks.
TECHNICAL DATA: Dosage: approx. yield 20-25 g/m² for all types of formwork. Packaging: 23 kg tanks.
TECHNICAL DATA: Application: by spray with suitable spray equipment. Consumption: from 15 to 25 g/m² on metal or plastic formwork. Packaging: 23 kg tanks.
28.4 Superficial curing compounds_________________________________________________________________
Mapecure E
Anti-evaporation agent in water emulsion for protecting the surface of concrete against quickly drying out when exposed to sunlight and winds.
Mapecure S
Film-forming curing agent in solvent to protect mortar and concrete from drying out too quickly when exposed to sunlight and winds.
Mapecure WG
Film-forming curing agent in aqueous emulsion for concrete. Does not need to be removed from the surface before bonding the floor covering.
TECHNICAL DATA: Application: spray. Consumption: – neat: 70-100 g/m²; – diluted: 1:1 with water: 140-200 g/m². Packaging: 25 kg tanks.
TECHNICAL DATA: Application: roller or spray. Consumption: 0.10-0.15 kg/m². Packaging: 24 kg tanks.
TECHNICAL DATA: Application: by spray or with a roller. Consumption: 150-200 g/m². Packaging: 25 kg tanks.
28.5 Mapei Color Paving__________________________________________________________________________
Color Paving Admix
Ready-mixed multi-purpose powdered admixture for exposed-finish architectural floors and surfaces.
TECHNICAL DATA: Colours: neutral, red, sand, yellow. Dosage: 25 kg/m³ of concrete. Packaging: paper bag containing 2 x 12.5 kg water-soluble bags.
297
28. ADMIXTURES FOR CONCRETE
Color Paving Binder
Ready-mixed ready to use screed supplied in big-bags for creating architectural road surfaces in exposed aggregate concrete.
Color Paving Pronto
Ready-mixed ready to use screed supplied in bags for creating architectural road surfaces in exposed aggregate concrete.
Mapecolor Pigment
Powdered pre-dispersed oxides to create an even stable colour in concrete mixes.
Mapecrete Fast Protection
Hydro-oil repellent protective treatment with a consolidating effect; may be applied on all types of concrete within a minimum of 24 hours of pouring.
298
TECHNICAL DATA: Colours: neutral, red, sand, yellow. Packaging: 970 kg big-bags.
TECHNICAL DATA: Colours: neutral, red, white, yellow. Particle size: 8/12 mm (neutral-red-yellow) 12/16 mm (neutral-red-white-yellow). Consumption: 25 kg to make 11.2 litres of concrete (88 bags/m³). Packaging: 25 kg bags.
TECHNICAL DATA: Colours: yellow, red, brown, green, black. Other colours available upon request. Dosage: 1% to 4% by weight of white cement; 3% to 6% by weight of grey cement. Packaging: 10 kg cardboard boxes containing 5 kg water soluble bags.
TECHNICAL DATA: Dosage: 150-200 g/m². Packaging: 22 litre drum.
Mapecrete Mineral Neutral
Mineralising treatment for concrete floors. Product developed to harden and consolidate the surface of new and old concrete substrates to increase their durability over the years.
Mapewash PO
Biodegradable vegetable oil-based surface set retardant with a curing effect to create architectural floors and surfaces.
Mapewash Protex
Temporary protective gel for substrates applied during laying operations to prevent concrete sticking and MAPEWASH PO from being absorbed.
TECHNICAL DATA: Colour: colourless. Dosage: substrates with low porosity (washed concrete, patterned concrete, terrazzo, etc.): 150-200 g/m². Porous substrates (interlocking blocks, drainable concrete, sand-blasted concrete, etc.): 250-300 g/m². Packaging: 10 litre drums.
TECHNICAL DATA: Colour: according to the type of product: green, blue, purple, yellow, pink, grey. Yield: by spray 3.5-4 m²/l. Packaging: 5 and 22 litre cans.
TECHNICAL DATA: Yield: 150 to 300 g per m². Packaging: 5 and 20 kg plastic drums.
299
AGGREGATES AND MORTARS FOR THE BUILDING INDUSTRY
29. VAGA - AGGREGATES AND MORTARS FOR THE BUILDING INDUSTRY 29.1 Mortars for the building industry__________________________________________________________________
BIOstabilitura
TECHNICAL DATA: Mixing ratio: supplied ready to use, blend before use if necessary. Coefficient of permeability to water vapour: µ=9. Composition: Slaked lime (type CL 90-S PL) and fine, natural silica sand (cat. 0/1 mm). Packaging: 25 kg bags. Yield: 1.7 kg/m²/mm of render finish.
Highly compatible, ecological finishing which responds fully to the construction requirements of eco-friendly building work. Finishing mortar for walls, made entirely with high quality, NATURAL, transpirant, eco-compatible, raw materials. Suitable for rendering internal and external surfaces.
FIBROmalta
Special fibre-reinforced render for the best results with the minimum effort. Suitable for render and general wall coatings. The micro-fibres guarantee no crack formation caused by plastic shrinkage when drying out. It is suitable for application with a rendering machine and is even more attractive when applied by hand.
MALTE PER INTONACI
MALTE PER MURATURA
CONFORME ALLA NORMA EUROPEA EN 998-1
CONFORME ALLA NORMA EUROPEA EN 998-2
CS IV
EN 998-1
EN 998-2
M5
FIBROstabilitura
TECHNICAL DATA: Mixing ratio: supplied ready to use, blend before use if necessary. Coefficient of permeability to water vapour: µ=9. Composition: slaked lime (type CL 90-S PL), fine natural silica sand (cat. 0/1 mm) and micro-fibres. Packaging: 25 kg bags. Yield: 1.7 kg/m²/mm of render finish.
FIBROstabilitura is a transpirant finishing mortar for masonry suitable for internal and external biocompatible render without cracks or crazing. FIBROstabilitura is reinforced with fibres which guarantee that no shrinkage cracks or crazing form during drying, and has unrivalled workability. FIBROstabilitura is a highly ecological product which responds fully to the construction requirements of ecofriendly building work.
Grassello di CALCE
Aerial binder for transpirant, ecological finishing compounds and render. Aerial binder for preparing traditional masonry render and mortar on site, the main ingredient for making natural, transpirant paintwork, final smoothing coats on render (fresh on fresh) and for restoring ancient buildings.
302
TECHNICAL DATA: Fire resistance: REI 180. Mixing ratio: 1 25 kg bag of FIBROMALTA with approx. 3.5 litres of water. Mixing time: 3 minutes. Pot life of mix: 30-40 minutes. Compressive strength after 28 days: ≥ 6 N/mm². Aggregate: 0/4 mm. Packaging: 25 kg bags. Yield: 18 kg/m²/cm of render - 22 kg/m² of wall made of bricks measuring 12x12x24.
EN 459-1
CALCI DA COSTRUZIONE
CL 90-S PL CONFORME ALLA NORMA EUROPEA EN 459-1
TECHNICAL DATA: Mixing ratio: supplied ready to use, blend before use if necessary. Composition: calcium hydroxide [Ca(OH)2]. Packaging: 25 kg bags. Yield: 1.4 kg/m²/mm of render finish-
HR10 Fibro
Ready-mixed high-adhesion rendering mortar in double-sealed bags to form rendered surfaces suitable for bonding ceramic tiles in compliance with EN 11493 standards.
EN 998-1
EN 998-2
TECHNICAL DATA: Mixing ratio: one 25 kg bag of HR10 FIBRO with approx. 3.5-4.0 litres of water. Composition: lime, cement, silica sand 0/4 mm, in compliance with EN 13139. Packaging: 25 kg bags. Yield: 1 m³ of already mixed mortar is equal to approx. seventy 25 kg. 19 kg/m²/cm of render.
MALTE PER INTONACI
CS IV CONFORME ALLA NORMA EUROPEA EN 998-1
HR15
For fire-resistant constructions with high structural characteristics. HR15 is a HIGH STRENGTH render RESISTANT TO FIRE. It Is particularly suitable for laying concrete and cement blocks and brickwork and is also suitable for rendering. It may be used for protecting and repairing concrete structures, in compliance with EN 1504-3. MALTE PER INTONACI
MALTE PER MURATURA
CONFORME ALLA NORMA EUROPEA EN 998-1
CONFORME ALLA NORMA EUROPEA EN 998-2
CS IV
EN 998-1
EN 998-2
EN 1504-3
M15
MaltaBASTARDA
The innovative formulate to make masonry and render quickly. Ready-mixed mortar with guaranteed performance figures for internal and external render, load-bearing and partition walls, sealing water pipes and/ or cable runs and for installing shower troughs and sanitary fittings.
MALTE PER INTONACI
MALTE PER MURATURA
CONFORME ALLA NORMA EUROPEA EN 998-1
CONFORME ALLA NORMA EUROPEA EN 998-2
CS IV
TECHNICAL DATA: Fire resistance: REI 180. Mixing ratio: 1 25 kg bag of HR10 FIBRO with approx. 3.5 litres of water. Mixing time: 3 minutes. Pot life of mix: 30-40 minutes. Compressive strength after 28 days: ≥ 15 N/mm². Aggregate: 0/4 mm. Packaging: 25 kg bags. Yield: 20 kg/m²/cm of render - 20 kg/m² of wall made of cement blocks measuring 20x20x40 cm.
EN 998-1
EN 998-2
TECHNICAL DATA: Fire resistance: EI 240. Mixing ratio: 1 25 kg bag of MaltaBASTARDA with approximately 3.5 litres of water. Mixing time: 3 minutes. Pot life of mix: 30-40 minutes. Compressive strength after 28 days: ≥ 6 N/mm². Aggregate: 0/4 mm. Packaging: 25 kg bags. Yield: 18 kg/m²/cm of render - 22 kg/m² of wall made of bricks measuring 12x12x24 cm.
M5
MaltaVISTA
For highly attractive, natural finish resistant to the trials of time. Its special formulation makes MaltaVISTA suitable for structurallysolid, natural finish masonry, guarantees insulation against water ingress and reduces the phenomenon of efflorescence, while its high plasticity makes it possible to adjust the position of blocks and bricks when laying.
EN 998-2
MALTE PER MURATURA
M5
CONFORME ALLA NORMA EUROPEA EN 998-2
TECHNICAL DATA: Mixing ratio: 1 25 kg bag of MaltaVISTA with approximately 3.5 litres of water. Mixing time: 3 minutes. Pot life of mix: 30-40 minutes. Compressive strength after 28 days: ≥ 5 N/mm². Capillary action water absorption: ≤ 0.15 kg / (m² x min0.5). Aggregate: 0/1 mm. Packaging: 25 kg bags. Yield: 40 kg/m² of wall.
303
29. VAGA - AGGREGATES AND MORTARS FOR THE BUILDING INDUSTRY
VAGAlighTher
Ultra-light rendering mortar, particularly recommended to create HEAT-INSULATING SYSTEMS and PROTECTIVE FIREPROOF RENDER in compliance with the prescriptions of Ministerial Decree MD 16th February 2007, “Fire-resistance classification of construction products and elements for construction work”. VAGALighTher is characterised by its ease of use and excellent workability and is the ideal product for all those situations where protective, fireproof CS IV render and heat-insulating mortar are required.
EN 998-1
EN 998-2
TECHNICAL DATA: Fire resistance: M.D. 16th Feb. 2007. Mixing ratio: one 20 kg bag of VAGAlighTher with approx. 3.5 litres of water. Mixing time: 3 mins. Pot life of mix: 30-40 mins. Compressive strength after 28 days: ≥ 10 N/mm². Particle size: silica aggregates 0/2 mm. Packaging: 20 kg bags. Yield: 11 kg/m²/cm of render.
MALTE PER INTONACI
CONFORME ALLA NORMA EUROPEA EN 998-1
29.2 Pre-blended mortars for the building industry_______________________________________________________
INTO+
Ready-mixed hydrated lime and cementbased powdered base render with high workability applied with a rendering machine on internal and external substrates made from: hydrated lime, Portland cement, graded sand and additives to improve its workability and adhesion.
EN 998-1
MALTE PER INTONACI
CS II
CONFORME ALLA NORMA EUROPEA EN 998-1
INTO+ Fibro
Ready-mixed fibre-reinforced hydrated lime and cement-based powdered base render applied with a rendering machine on internal and external substrates made from: hydrated lime, Portland cement, graded sand, fibres and additives to improve its workability, adhesion and flexural strength.
EN 998-1
MALTE PER INTONACI
CS II
304
TECHNICAL DATA: Mixing ratio: 5.8 litres for one 25 kg bag. Compressive strength after 28 days: ≥ 2.0 N/mm². Aggregate: 0/1.5 mm. Packaging: 25 kg bags. Yield: 13.5 kg/m²/cm of render finish.
CONFORME ALLA NORMA EUROPEA EN 998-1
Malta+ Fibro
Ready-mixed fibre-reinforced powdered mortar applied using manual tools on exposed masonry made from: Portland cement, hydraulic lime, graded sand, fibres and additives to improve its application characteristics. Suitable for a wide variety of uses such as general building work and rendering internal and external masonry made from bricks, concrete blocks, stone, etc. Its special formulation facilitates application using manual tools, including by operators not specialised in this type of work. The fibres and special additives in the mortar contrast the effect of hydraulic shrinkage and reduce the risk of crack formation to a minimum, including when rendering heterogeneous substrates.
TECHNICAL DATA: Mixing ratio: 5.8 litres for 25 kg bag. Compressive strength: ≥ 2 N/mm². Aggregate: 0/1.5 mm. Packaging: 25 kg bags. Yield: 13.5 kg/m²/cm of render.
EN 998-1
EN 998-2
MALTE PER INTONACI
CS IV CONFORME ALLA NORMA EUROPEA EN 998-1
MALTE PER MURATURA
M5
CONFORME ALLA NORMA EUROPEA EN 998-2
TECHNICAL DATA: Mixing ratio: one 25 kg bag of MALTA+ FIBRO with approx. 4.0 litres of water. Mixing time: 3 minutes. Compressive strength: ≥ 6,0 N/mm². Capillary action water absorption: ≤ 0.50 kg / (m² x 0.5 min). Aggregate: 0/1.5 mm. Packaging: 25 kg bags. Yield: 16 kg/m²/cm.
RASA+
RASA+ is a one-component waterrepellent normal-hardening fine-textured grey cementitious skimming mortar supplied in powder form made from special high-strength binders, selected aggregates, special admixtures and synthetic polymers. When RASA+ is mixed with water, its special composition forms a highly-adhesive mortar with excellent workability which makes it easier to apply with a smooth trowel and easier to finish the surface with a metal or CS IV sponge float. MALTE PER INTONACI
CONFORME ALLA NORMA EUROPEA EN 998-1
EN 998-1
EN 1504-2
TECHNICAL DATA: Mixing ratio: it may be mixed with FIBROstabilitura or BIOstabilitura VAGA. Classification: EN 998-1 - type GP mortar, category CS IV; EN 1504-2 - coating (C) principles MC and IR. Compressive strength after 28 days: ≥ 16 N/mm². Colour: grey. Particle size: silica aggregates 0/0.4 mm. Packaging: 25 kg bags. Yield: 1.3 kg/m²/mm of finish.
SISTEMI DI PROTEZIONE DELLA SUPERFICIE DI CALCESTRUZZO
MC-IR CONFORME ALLA NORMA EUROPEA EN 1504-2 (C)
29.3 Concrete for the building industry___________________________________________________________
BEtonFLuid
BEtonFLuid is a high-strength (Rck 40 N/ mm²), self-compacting concrete (SCC) made by VAGA, ideal for manufacturing all types of structural elements with a natural finish. BEtonFLuid is particularly suitable for casting into special formwork, including where there is a high density of reinforcement rods, without the risk of segregation.
CALCESTRUZZO RCK30 CALCESTRUZZO RCK30 by Vaga is ideal for making CAST STRUCTURAL ELEMENTS AND MEMBERS with guaranteed mechanical performance characteristics such as beams, pillars, foundation plinths, floor slabs, etc.; EXPOSED ELEMENTS AND MEMBERS such as stairs, floors and walls; CONCRETE FLOORS; CAST CONCRETE EXPOSED TO (EN2061): dry surroundings (XC1) and wet surroundings (XC2).
CALCESTRUZZO RCK40 CALCESTRUZZO RCK40 by Vaga is ideal for making: high strength CAST STRUCTURAL ELEMENTS AND MEMBERS such as beams, pillars, foundation plinths, floor slabs, etc.; EXPOSED ELEMENTS AND MEMBERS such as stairs, floors and walls; CONCRETE FLOORS; CAST CONCRETE EXPOSED TO (EN206-1): moderately damp surroundings (XC3), cyclical wet/dry surroundings (XC4), airborne salt (XS1), other chlorides (XD2), surroundings with freeze/thaw cycles (XF1), chemical attack (XA1).
EN
TECHNICAL DATA: Characteristic strength: Rck 40. Exposure class: XC4, XD2, XS1, XF1, XA2. Water/cement ratio: ≤ 0.45. Aggregate: mixed sand. Packaging: 25 kg bags. Yield: 86 bags = 1 m³.
EN
TECHNICAL DATA: Characteristic strength: Rck 30. Consistency class: S4 (fluid). Exposure class: XC2. Water/cement ratio: 0,60. Aggregate: 0/15 mm. Packaging: 25 kg bags. Yield: 86 bags = 1 m³.
206-9
206-1
TECHNICAL DATA: Characteristic strength: Rck 40. Consistency class: S4 (fluid). Exposure class: XC4 / XS1 / XD2 / XF1 / XA1. Water/Cement ratio: 0,50. Aggregate: 0/15 mm. Packaging: 25 kg bags. Yield: 86 bags = 1 m³.
305
29. VAGA - AGGREGATES AND MORTARS FOR THE BUILDING INDUSTRY
Dreno
DRENO permeable concrete: ideal for making floors with very high drainage capacity (> 640 mm/min), including in those places difficult to reach with conventional casting systems.
EXTRABETON
EXTRABETON by Vaga is ideal for making: high-strength, durable CAST STRUCTURAL ELEMENTS AND MEMBERS such as beams, pillars, foundation plinths and floor slabs, including those resistant to chemicals (to be verified with VAGA TECHNICAL SERVICES); FLOORS IN INDUSTRIAL ENVIRONMENTS AND FLOORS WITH VEHICLE ACCESS (including those resistant to FREEZE/THAW cycles); ALL TYPES OF CONTAINMENT BASINS (e.g. for drinking water, water with aggressive chemicals, depuration basins, sewer systems, etc.); STRUCTURAL ELEMENTS AND MEMBERS such as stairs and floors; CAST CONCRETE EXPOSED TO (EN206-1): cyclical wet/dry surroundings (XC4), airborne salt (XS3), other chlorides (XD3), surroundings with freeze/thaw cycles (XF2 - XF3 XF4) and chemical attack (XA1 - XA2* - XA3*).
TECHNICAL DATA: Drainage capacity: > 640 mm/min. Compressive strength: > 15 N/mm². Aggregate: 6/10 mm. Density of fresh mortar: > 1850 kg/m³. Percentage of cavities: > 15%. Packaging: 25 kg bags. Yield: 68 bags = 1 m³.
TECHNICAL DATA: Characteristic strength: Rck 50. Consistency class: S4 (fluid). Exposure class: XC4 / XS3 / XD3 / XF4 / XA1 - XA3* (ARS version). Water/cement ratio: 0,45. Aggregate: 0/15 mm. Packaging: 25 kg bags. Yield: 86 bags = 1 m³.
(* to be verified with VAGA TECHNICAL SERVICES)
SAETTA
When time is tight and quality is a must. SAETTA ultra high performance quick beton with a low shrinkage rate. The formulate complies with EN 206-1 standards, “and allows the time required for building work to be considerably reduced, including structural work, thanks to a stripping being time of just 2 hours!”.
VAGAQUARZ
VAGAQUARZ is a mixture of particularly hard, natural mineral aggregates (quartz) which is used to protect concrete floors. It is particularly recommended for use in industrial environments and in warehouses where there is a high volume of vehicles in transit. It may be used to create attractive finishes in a variety of colours. VAGAQUARZ is supplied ready to use, is pre-mixed with cement, additives and fillers and may be applied either manually or with power tools over wet concrete.
306
TECHNICAL DATA: Compressive strength: 2 hours ≥ 9.5 N/mm²; 4 hours ≥ 11.5 N/mm²; 8 hours ≥ 12.0 N/mm²; 24 hours ≥ 13.0 N/mm²; 7 days ≥ 30.0 N/mm²; 4 hours ≥ 40.0 N/mm². Consistency class: S5 (super-fluid). Water/cement ratio: ≤ 0.51. Aggregate: mixed sand. Packaging: 25 kg bags. Yield: 87 bags = 1 m³
TECHNICAL DATA: Colour: grey; other colours available on request. Particle size: 0.5-1.4. Hardness (Mohs scale): 6°-7°. Compressive strength after 28 days: 63.28 N/mm². Flexural strength: 7.24 N/mm². Resistance to abrasion: A9. Setting time: 60 mins. Set to foot traffic: 24-36 hours. Packaging: 25 kg bags. Yield: manual application 5.5 kg/m² - machine application 12 kg/m².
29.4 Screeds for the building industry__________________________________________________________________
SabbiaCEMENTO
Formulate with special acrylic admixtures for any type of high-performance screed. Ready-mixed cementitious screed suitable for laying all types of bonded and floating screeds, including heated screeds. Set to foot traffic after approximately 16 hours, wait 36 hours before laying ceramic tiles and 14 days for parquet and resilient coverings.
EN 13813
EN 140-8
23dB
CT
TECHNICAL DATA: Soundproofing against the noise of footsteps: ΔLw = 23 dB. Mixing ratio: 1 25 kg bag of SabbiaCEMENTO with approx. 1 litre of water. Mixing time: until completely blended. Pot life of mix: 60 minutes Compressive strength after 28 days: ≥ 20 N/mm². Flexural strength after 28 days: ≥ 4 N/mm². Packaging: 25 kg bags. Yield: 20 kg/m²/cm.
MASSETTI CEMENTIZI
C20-F4 CONFORME ALLA NORMA EUROPEA EN 13813
A1fl
TurboMASS
Special formulate for making fibrereinforced quick-drying ready-mixed screed, particularly suitable for laying flooring substrates, including heated floor substrates, when drying times need to be reduced. TURBOMASS sets to foot traffic after 3-4 hours and dries after 4 days and is ready for laying parquet and resilient floor coverings.
EN 13813
CT
MASSETTI CEMENTIZI
C25-F5 CONFORME ALLA NORMA EUROPEA EN 13813
A1fl
TECHNICAL DATA: Mixing ratio: 1 x 25 kg bag of TURBOMASS with approx. 1 litre of water. Mixing time: until completely blended. Pot life of mix: 20 mins. Compressive strength after 28 days: ≥ 25 N/mm². Flexural strength after 28 days: ≥ 5 N/mm². Packaging: 25 kg bags. Yield: 20 kg/m²/cm.
29.5 Service products________________________________________________________________________________
MB1 Pavicalce
Ready-mixed masonry and rendering mortar with dry aggregates for internal and external render, load-bearing and partition walls and for sealing hydraulic and electrical pipe-work.
NERO+
NERO+ is a cold, ready to use bitumen conglomerate supplied in bags. It is made from a mixture of aggregates, crushed sand and mineral additives (fillers) hot-blended with bitumen emulsion made with non-toxic flux oils.
TECHNICAL DATA: Compressive strength after 28 days: ≥ 6 N/mm². Mixing ratio: 1 bag of MB1 Pavicalce with approx. 3.75 litres of water. Mixing time: 5 mins. Pot life of mix: 20 mins. Packaging: 25 kg bags. Yield: 18 kg/m²/cm of render - 22 kg/m² of wall.
TECHNICAL DATA: Application temperature: > 5°C. Packaging: 25 kg bags.
307
29. VAGA - AGGREGATES AND MORTARS FOR THE BUILDING INDUSTRY
SABBIASAL
TECHNICAL DATA: Composition: sodium chloride (NaCl) in a granulometric curve of 0/10 mm and silica sand in a granulometric curve of 0/5 mm. Packaging: 20 kg bags.
SABBIASAL is a new, freeze-resistant product made from a special mixture of sodium chloride and a calibrated granulometric curve of silica sand, which makes it ideal for protecting road surfaces by reducing the amount of ice and snow that forms and settles on them, thus offering better grip for moving vehicles.
VAGASAL
TECHNICAL DATA: Composition: sodium chloride (NaCl) in a granulometric curve of 0/10 mm. Packaging: 25 kg bags.
VAGASAL is high efficiency, damp sodium chloride in a calibrated granulometric curve of 0/10 mm and is used to reduce the amount of ice and snow that forms and settles on the surface of roads.
29.6 Damp aggregates for the building industry____________________________________________________________
FRANTUMATA
Crushed washed selected aggregate ideal for coarse and rustic finish render, integrating concrete mixes and making floor screeds.
EN 12620
EN 13043
TECHNICAL DATA: Particle size: from 0.1 mm to 4.0 mm. Category: 0/2 mm according to EN 12620. Category: 0/2 mm according to EN 13139. Category: 0/2 mm according to EN 13043. Category: 0/2 mm according to EN 13242. Packaging: VAGA FRANTUMATA sand is available in: – 25 kg bags; – bulk; – 1.5 t big bags.
EN 13139
EN 13242
MISTA
Selected, washed aggregates with the CE symbol, suitable for concrete, bitumen conglomerates and site mortar. Ideal for preparing beton on site for small building jobs and for all applications which require a blend of calibrated aggregates with a maximum diameter of 10.0 mm.
308
EN 12620
EN 13139
TECHNICAL DATA: Grain size: from 0.1 mm to 10.0 mm. Category: 0/8 mm according to EN 12620. Category: 0/8 mm according to EN 13139. Packaging: VAGA MISTA sand is available: – in 25 kg bags; – bulk; – in 1.5 t big bags.
TICINO
Selected, washed aggregates with the CE symbol, suitable for concrete, bitumen conglomerates and site mortar. Ideal for preparing finishing mortar and fine render on site. Also used in horticulture and in all those sectors and applications where the use of extra-fine natural sand is required.
EN 12620
EN 13139
VAGLIATA
Selected, washed aggregates with the CE symbol, suitable for concrete, bitumen conglomerates and site mortar. Ideal for installation substrates for laying self-locking solid blocks, mixing mortar and rough or rustic-finish render on site, installing floor screeds on site and all applications which require graded sand with a maximum diameter of 4.0 mm.
EN 12620
EN 13139
VAGLIATA Super
Ideal for installation substrates for laying self-locking solid block flooring, mixing coarse and rustic finish mortar and render on site, installing flooring screeds on site and all those applications that require graded sand with a maximum diameter of 4.0 mm.
EN 12620
EN 13139
TECHNICAL DATA: Grain size: from 0.1 mm to 0.9 mm. Category: 0/1 mm according to EN 12620. Category: 0/1 mm according to EN 13139. Packaging: VAGA TICINO sand is available: – in 25 kg bags; – bulk; – in 1.5 t big bags.
TECHNICAL DATA: Grain size: from 0.1 mm to 4.0 mm. Category: 0/4 mm according to EN 12620. Category: 0/4 mm according to EN 13139. Packaging: VAGA VAGLIATA sand is available: – in 25 kg bags; – bulk; – in 1.5 t big bags.
TECHNICAL DATA: Particle size: from 0.1 mm to 4.0 mm. Category: 0/4 mm according to EN 12620. Category: 0/4 mm according to EN 13139. Packaging: VAGA VAGLIATA SUPER sand is available in: – 25 kg bags; – bulk; – 1.5 t big bags.
29.7 Dry aggregates for the building industry____________________________________________________________
VG03S
Ideal for sealing and filling joints when laying self-locking solid blocks, building sand for wood and bricks and removing the following from surfaces: smog, graffiti, dirt and carbonatation; mediumabrasion and depth sand-blasting to improve the bond of varnish, render, etc. to surfaces.
EN 13139
TECHNICAL DATA: Humidity level: less than 0.5%. Grain size: from 0.3 mm to 1.0 mm. Category: 0/1 mm according to EN 13139. Packaging: VAGA VG03S sand is available: – in 25 kg bags; – bulk; – in 1.5 t big bags.
309
29. VAGA - AGGREGATES AND MORTARS FOR THE BUILDING INDUSTRY
VG15
Ideal for sealing and filling joints when laying self-locking solid blocks, preparing smoothing and finishing compounds on site and for all those applications which require natural fine sand.
EN 13139
VG16SS
Ideal for sealing and filling joints when laying self-locking solid blocks, sandblasting metallic structures when rust and old surface treatments need to be removed, to create clean surfaces and improve the bond of paints.
EN 13139
VG17FS
Ideal for sealing and filling joints when laying self-locking solid blocks, sandblasting ironwork and highly abrasive, deep-down surface treatments to remove residues of tar, deteriorated concrete, etc.
310
EN 13139
TECHNICAL DATA: Humidity level: less than 0.5%. Grain size: from 0.3 mm to 0.6 mm. Category: 0/1 mm according to EN 13139. Packaging: VAGA VG15 sand is available: – in 25 kg bags; – bulk; – in 1.5 t big bags.
TECHNICAL DATA: Humidity level: less than 0.5%. Grain size: from 0.3 mm to 1.25 mm. Category: 0/1 mm according to EN 13139. Packaging: VAGA VG16SS sand is available: – in 25 kg bags; – bulk; – in 1.5 t big bags.
TECHNICAL DATA: Humidity level: less than 0.5%. Grain size: from 0.6 mm to 1.6 mm. Category: 0/2 mm according to EN 13139. Packaging: VAGA VG17FS sand is available: – in 25 kg bags; – bulk; – in 1.5 t big bags.
311
312
NOTES
313
314
NOTES
315
316
NOTES
317
318
NOTES
319
ITALY
EUROPE
MAPEI S.P.A. Con Socio Unico
AUSTRIA Mapei Austria GmbH Nußdorf ob der Traisen Tel. +43-2783-8891 Fax +43-2783-8891-125 www.mapei.at -
[email protected] Plants in Nußdorf ob der Traisen and Langenwang Distribution centres in Vienna, Hall in Tyrol, Graz, Klagenfurt, Nußdorf and Langenwang
HEAD OFFICE Via Cafiero, 22 - 20158 Milan Tel. +39 02 37673.1 Fax +39 02 37673.214 www.mapei.com -
[email protected] MAPEIWORLD MILAN SPECIFICATION CENTRE Viale Jenner, 4 - 20159 Milan Tel. +39 02 37673.1 -
[email protected] OFFICES IN MILAN • Viale Jenner, 4 - 20159 Milan Tel. +39 02 37673.1 Fax +39 02 37673.214 • Via Valtellina, 63 - 20159 Milan Tel. +39 02 37673.1 Fax +39 02 37673.214 OFFICE IN ROME Viale Libano, 28 - 00144 Rome Tel. +39 06 5929211 Fax +39 06 59290337 OFFICE IN LECCE Via Adriatica, 2 B (ang. viale Porta d’Europa) - 73100 Lecce Tel. +39 0832 246551 Fax +39 0832 248472
[email protected] OFFICE IN CIVITANOVA MARCHE Viale San Luigi Versilia, 38/40 62012 Civitanova Marche (MC) Tel. +39 02 376 73 052
[email protected] OFFICE IN PISA Via di Gargalone, 9 - 56121 Pisa Tel. +39 338 69 00 793
[email protected] PLANTS • Strada Provinciale, 159 20060 Robbiano di Mediglia (Milan) Tel. +39 02 906911 Fax +39 02 90660575 • Via Mediana S.S. 148, km 81,3 04100 Latina Tel. +39 0773 2548 Fax +39 0773 250391 DISTRIBUTION CENTRE IN SASSUOLO Via Valle D’Aosta, 46 41049 Sassuolo (Modena) Tel. +39 0536 803116 Fax +39 0536 805255
BELGIUM and LUXEMBOURG Mapei Benelux SA/NV Grâce-Hollogne Tel. +32-4-2397070 Fax +32-4-2397071 www.mapei.be -
[email protected] BULGARIA Mapei Bulgaria E.O.O.D. Sofia Tel. +359 (2) 4899775 Fax +359 (2) 4898723 www.mapei.bg -
[email protected] Plant in Ruse CROATIA Mapei Croatia d.o.o. Sveta Nedelja Tel. +385-1-3647790 Fax +385-1-3647787 www.mapei.hr -
[email protected] CZECH REPUBLIC Mapei spol. s r.o. Olomouc - Hodolany Tel. +420-585-201-151 Fax +420-585-227-209 www.mapei.cz -
[email protected] DENMARK Mapei Denmark A/S Vejen Tel. +45 69 60 74 80 www.mapei.dk -
[email protected] FINLAND Mapei OY Espoo Tel. +358 9 867 8900
[email protected] - www.mapei.fi FRANCE Mapei France S.A. Saint-Alban Tel. +33-5-61357305 Fax +33-5-61357314 www.mapei.fr -
[email protected] Plants in Saint-Alban, Montgru Saint-Hilaire and Saint-Vulbas MAPEIWORLD Paris Specification Centre Tel. +33-1-87448032
[email protected] GERMANY MAPEI GmbH Großostheim Tel. +49 6026/50197-0 Fax. +49 6026/50197-48 www.mapei.de -
[email protected] Plant in Weferlingen GREECE Mapei Hellas SA Chalkida Tel. +30-22620-71906 Fax +30-22620-71907 www.mapei.gr
[email protected] Plant in Ritsona HUNGARY Mapei Kft. Budaörs Tel. +36-23-501670 Fax +36-23-501666 www.mapei.hu -
[email protected] Plant in Sóskút
NORWAY Mapei AS Sagstua Tel. +47 62 97 20 00 www.mapei.no -
[email protected] Plant in Sagstua
THE NETHERLANDS Mapei Nederland B.V. Apeldoorn Tel. +31-85 00 69 200 - Fax +31-85 00 69 299 www.mapei.nl -
[email protected]
POLAND Mapei Polska Sp. z o.o. Gliwice Tel. +48-32-7754450 Fax +48-32-7754471 Commercial office: Warsaw Tel. +48-22-5954200 Fax +48-22-5954202 www.mapei.pl -
[email protected] Plants in Gliwice and Barcin
TURKEY Mapei Yapı Kimyasalları Ins¸aat San. ve Tic. A.S¸. Ankara Office: Tel. +90 312 227 84 84 Fax +90 312 227 84 80 -
[email protected] Istanbul Office: Tel. +90 216 455 20 12 Fax +90 216 455 02 26
[email protected] Izmir Office: Tel. +90 232 502 35 02
[email protected] Polatlı plant: Tel. +90 312 626 51 52 Fax +90 312 626 50 85 - www. mapei.com.tr
PORTUGAL Lusomapei S.A. Castanheira do Ribatejo Tel. +351 263 860 360 Fax +351 263 860 369 www.mapei.pt -
[email protected] Plant in Anadia ROMANIA Mapei Romania SRL Bucharest Tel. +40 21 311 78 19/20 Fax +40 21 311 78 21 www.mapei.ro
[email protected] RUSSIAN FEDERATION AO Mapei Moscow Tel. +7-495-258-5520 Fax +7-495-258-5521 www.mapei.ru
[email protected] Plants in Stupino (Moscow region), Aramil (Ekaterinburg region) and Kikerino (S. Petersburg region) Representative office in Almaty (Kazakhstan) SERBIA MAPEI SRB d.o.o. Beograd Leštane, Beograd Tel.: +381 (0)11 40 46 977 www.mapei.rs
[email protected] Distribution Centre in Leštane (Beograd) SLOVAK REPUBLIC Mapei SK s.r.o. Ivanka pri Dunaji Tel. +421-2-4020 4511 www.mapei.sk -
[email protected] SLOVENIA Mapei d.o.o. Novo mesto Tel. +386-1-7865050/51 - Fax +386-17865055 www.mapei.si -
[email protected] Distribution centre in Grosuplje SPAIN Mapei Spain SA Santa Perpetua de Mogoda (Barcellona) Tel. +34-93-3435050 - Fax +34-93-3024229 www.mapei.es -
[email protected] Plants in Amposta (Tarragona) and Cabanillas del Campo (Guadalajara) Distribution Centres in Onda (Castellón) and Marratxi (Mallorca) SWEDEN Mapei AB Bromma Tel. +46-8-52509080 www.mapei.se -
[email protected] SWITZERLAND Mapei Suisse SA Sorens / FR Tel. +41-26-9159000 - Fax +41-26-9159003 www.mapei.ch -
[email protected] Plant in Sorens
UKRAINE Mapei Ukraine LLC Kyiv Tel. +38 044 221 15 01 Fax +38 044 393 14 52 www.mapei.com.ua -
[email protected] Distribution centre in Zazimje village UNITED KINGDOM Mapei U.K. Ltd Halesowen Tel. +44-121-5086970 - Fax +44-1215086960 www.mapei.co.uk
[email protected] MAPEIWORLD London, Clerkenwell Specification Centre Tel. +44-203-302 9610
[email protected] Plant and distribution centre in Halesowen
THE AMERICAS
ASIA
ARGENTINA Mapei Argentina SA Escobar, Buenos Aires Tel./Fax +54 (348) 443-5000 www.mapei.com.ar Plant in Escobar, Buenos Aires Distribution centre in Córdoba
CHINA - Mapei Construction Materials (Guangzhou) Co. Ltd. Guangzhou Tel. +86-20 8365 3489 www.mapei.com.cn
[email protected] Plant in Conghua (Guangzhou)
BRAZIL Mapei Brasil Materiais de Construção Ltda São Paulo Tel. +55 11 3386-5151 www.mapei.com.br
[email protected]
HONG KONG S.A.R. Mapei China Ltd Hong Kong Tel. +852-21486816 - Fax +852-25121328 www.mapei.com.hk
[email protected]
CANADA Mapei Inc. Laval, Québec Tel. +1-450-662-1212 Fax +1-450-662-0444 www.mapei.ca Plants in Brampton (ON), Delta (BC), Laval (QC), Maskinongé (QC) Distribution centre in Calgary (AB)
INDIA - Mapei Construction Products India Pvt Ltd Bangalore Tel. +91 80 2222 1820, 2222 1840 Fax +91 80 2222 1810 www.mapei.co.in -
[email protected] Plants in Bangalore and Vadodara Offices in Mumbai and New Delhi
COLOMBIA Mapei Colombia S.A.S. La Estrella, Antioquia Tel. +57-4 444 65 15 www.mapei.com.co -
[email protected] Distribution Centres in Bogota and Barranquilla COSTA RICA Mapei Construction Chemicals Panama S.A. (Costa Rica branch) Lagunilla de Heredia Tel. +506-2237-3689
[email protected] MEXICO Mapei de México, S.A. de C.V. Querétaro, Qro. Tel.+52 442 209 5022 01 800 696 27 34 www.mapei.mx
[email protected] Plants: Zimapán Hgo.; Cancún Q.R. Distribution centre: Querétaro Qro. PANAMA Mapei Construction Chemicals Panama S.A. Panama City Tel. +507 261 9549 Fax +507 261 9550 www.mapei.com.pa
[email protected] Additive Plant in Panama City PERU Mapei Perù SAC Lurín - Lima Tel. +51 1 500 6180 www.mapei.com.pe
[email protected] Plant in Lima PUERTO RICO Mapei Caribe Inc. Dorado Tel. +1-787-270-4162 - Fax +1-787-883-1669 www.mapei.com/PR Plant in Dorado U.S.A. Mapei Corporation Deerfield Beach, Florida Tel. +1-954-246-8888 Fax +1-954-246-8800 www.mapei.us Plants in Dalton (GA), Eagan (MN), Fort Lauderdale (FL), Fredericksburg (VA), Garland (TX), Swedesboro (NJ), Madison (IL), San Bernardino (CA), Tempe (AZ) and West Chicago (IL) Distribution centres in Calhoun (GA) and Wildwood (FL) VENEZUELA Mapei de Venezuela CA Caracas Tel. +58-212-991-1797 +58-212-991-9423 www.mapei.com.ve
[email protected] Plant in Cagua Estado Aragua
INDONESIA - PT MAPEI Indonesia Construction Solutions Jakarta City Office Tel. +62 21 782 6976 Cikarang Plant Office Tel. +62 21 8911427 Fax +62 21 8990 6052 www.mapei.co.id -
[email protected] Plant in Lippo Cikarang, Bekasi SOUTH KOREA - Mapei Korea Ltd. Seoul Tel. +82-2-2199-2000 Fax +82-2-2155-2060 www.mapei.co.kr -
[email protected] Plant in Cheonan (Chungcheongnam-do) MALAYSIA Mapei Malaysia Sdn Bhd Petaling Jaya Tel. +603-7842 9098 Fax +603-7842 6197 www.mapei.com.my -
[email protected] Plant in Nilai PHILIPPINES Mapei Philippines Inc. Binan Laguna Tel. +63 049 250-2427
[email protected] QATAR - Mapei Doha L.L.C Doha Tel. +974 4 423 1308 Fax +974 4 423 1100 www.mapei.qa -
[email protected] SAUDI ARABIA Mapei Saudia L.L.C Riyadh www.mapei.com.sa -
[email protected] SINGAPORE Mapei Far East Pte Ltd Singapore Tel. +65-68623488 Fax +65-68621012 / 68621013 www.mapei.com.sg -
[email protected] Plant in Singapore UNITED ARAB EMIRATES Mapei Construction Chemicals L.L.C Dubai Tel. +971 4 815 6666 - Fax +971 4 885 8438 www.mapei.ae -
[email protected] Plant in Dubai VIETNAM - Mapei Vietnam Ltd Quang Nam Province Tel. +84-235-3565 801-7 Fax +84-235-3565 800 Northern Branch in Ha Noi Capital Tel. +84-24-3928 7924-6 Fax +84-24-3824 8645 Central Branch in Da Nang City Tel. +84-236-3565 001-4 Fax +84-236-3562 976 Southern Branch in Ho Chi Minh City Tel. +84-28-3512 1045/6/7-3899 2845 Fax +84-28-3899 2842 www.mapei.com.vn -
[email protected] Plant in Chu Lai
OCEANIA
AFRICA
AUSTRALIA Mapei Australia Pty Ltd Brisbane Tel. +61 7 3276 5000 Fax +61 7 3276 5076 www.mapei.com.au
[email protected] Plant in Wacol
EGYPT Mapei Egypt For Construction Chemicals S.A.E. Cairo Tel. +20 2 2537 0000 Fax +20 2 2537 0004 www.mapei.eg
[email protected]
NEW ZEALAND Mapei New Zealand Ltd Auckland Tel. +64-9-9211994 Fax +64-9-9211993 www.mapei.co.nz
[email protected]
Kenya Mapei East Africa Ltd Nairobi P.O. Box 9436 – 00100 Tel: +254 709045000 www.mapei.co.ke
[email protected] SOUTH AFRICA Mapei South Africa (Pty) Ltd Johannesburg Tel. +27 11 5528476 Cape Town office Tel. +27 11 552 8476 Fax +27 86 232 6931 www.mapei.co.za
[email protected] Plant in Germiston
C.P. MK 670030 - (GB) 1/2020
HEAD OFFICE MAPEI S.p.A. Via Cafiero, 22 - 20158 Milan Tel. +39-02-37673.1 mapei.com
[email protected]